Experimental investigation of palm kernel fibre reinforced epoxy based composite
0
조회
0
다운로드
11
인용
0
참고문헌
키워드
초록
The composite specimen consisting of eight layers of palm kernel and coir fibers with different weight proportions wereprepared through hand lay-up technique. The experimental investigation of delamination factor, surface roughness, machiningforce and tool life are carried out in this work. The hand layup technique was used for the processing of the compositematerial, which constitutes the epoxy resin as the matrix material and fibre as the reinforcing material. Also silicon carbidewas added to the composite material in several percentages to increase the strength of the composite material. The specimenwas tested according to the testing standards and the values of surface roughness, delamination factor, machining force andtool life were recorded. ANOVA and Taguchi analysis for all responses were carried out and discussed here.
Abstract
The composite specimen consisting of eight layers of palm kernel and coir fibers with different weight proportions wereprepared through hand lay-up technique. The experimental investigation of delamination factor, surface roughness, machiningforce and tool life are carried out in this work. The hand layup technique was used for the processing of the compositematerial, which constitutes the epoxy resin as the matrix material and fibre as the reinforcing material. Also silicon carbidewas added to the composite material in several percentages to increase the strength of the composite material. The specimenwas tested according to the testing standards and the values of surface roughness, delamination factor, machining force andtool life were recorded. ANOVA and Taguchi analysis for all responses were carried out and discussed here.
참고문헌 (22)
- Oh-HeonKwon, "Mechanical Behavior and Numerical Estimation of Fracture Resistance of a SCS6 Fiber Reinforced Reaction Bonded Si₃N₄ Continuoun Fiber Ceramic Composite", Journal of Mechanical Science and Technology, 16(9), pp.8~1101 (2002), 대한기계학회
- C. Elanchezhian, , Mater. Today : Proc, 5(1), pp.1785~1790 (2018)
- W. Ouarhim, "Mechanical and Physical Testing of Biocomposites, Fibre-Reinforced Composites and Hybrid Composites", pp.43~60 (2019), Woodhead Publishing
- A. Shahzad, "Mechanical and Physical Testing of Biocomposites, Fibre-Reinforced Composites and Hybrid Composites", pp.215~239 (2019), Woodhead Publishing
- P. K. Bajpai, , Mater. Today : Proc, 5(2), pp.8699~8706 (2018)
- O. Osita, , Int. J. Eng. Technol, 7, pp.68~77 (2016)
- N. Naresh, , IOSR JMCE, 6(1), pp.102~111 (2013)
- A.I. Azmi, , Int. J. Adv. Manuf. Technol., 64(1-4), pp.247~261 (2013)
- J. S. Pang, , HBRC. J, 10(2), pp.138~144 (2014)
- V. Kavimani, , Compos. B. Eng, 167, pp.621~630 (2019)
- S. Gopalakrishnan, , Compos. B. Eng, 43(2), pp.302~308 (2012)
- M. Seeman, , Int. J. Adv. Manuf. Technol, 48(5-8), pp.613~624 (2010)
- M.P. Jenarthanan, , Int. J. Eng. Sci. Technol, 5(4), pp.22~36 (2013)
- K. Palanikumar, , Mater. Manuf. Process, 23(8), pp.858~864 (2008)
- C. R. Dandekar, , Int. J. Mach. Tools Manuf, 57, pp.102~121 (2012)
- R. Vinayagamoorthy, "A central composite design based fuzzy logic for optimization of drilling parameters on natural fiber reinforced composite", Journal of Mechanical Science and Technology, 32(5), pp.2011~2020 (2018), 대한기계학회
- G. Wu, , Model. Simul. Mater. Sci. Eng, 13(3), pp.413~ (2005)
- L. Dvorkin, , Rev. Romana Mater, 49(3), pp.361~369 (2019)
- M. Srinivasan, "Minimization of delamination, surface roughness and thrust force in drilling of Al2O3 ceramic particle filled CFRP composites", Journal of Ceramic Processing Research, 22(3), pp.345~355 (2021), 청정에너지연구소[DOI]
- Y.M. Kin, , J. Ceram. Process. Res, 13(S2), pp.S211~S214 (2012)
- G. S. Krishnan, , Mater. Res. Express, 7(1), pp.015102~ (2019)
- E.N. Obika, , Adv. Mech. Eng, 12(7), pp.1687814020947611~ (2020)