탄탈륨 및 탄탈륨-텅스텐 합금 분말의 소결성 및 미세조직 연구
Sintering Behavior and Microstructures of Tantalum and Tantalum-Tungsten Alloys Powders
1
조회
0
다운로드
4
인용
0
참고문헌
키워드
초록
The purpose of this study is to investigate the densification behavior and the corresponding microstructural evolution of tantalum and tantalum-tungsten alloy powders for explosively formed liners. The inherent inhomogeneous microstructures of tantalum manufactured by an ingot metallurgy might degrade the capability of the warhead. Therefore, to overcome such drawbacks, powder metallurgy was incorporated into the near-net shape process in this study. Spark plasma-sintered tantalum and its alloys with finer particle sizes exhibited higher densities and lower grain sizes. However, they were contaminated from the graphite mold during sintering. Higher compaction pressures in die and isostatic compaction techniques also enhanced the sinterability of the tantalum powders; however, a full densification could not be achieved. On the other hand, the powders exhibited full densification after being subjected to hot isostatic pressing over two times. Consequently, it was found that the hot isostatic-pressed tantalum might exhibit a lower grain size and a higher density as compared to those obtained in previous studies.
Abstract
The purpose of this study is to investigate the densification behavior and the corresponding microstructural evolution of tantalum and tantalum-tungsten alloy powders for explosively formed liners. The inherent inhomogeneous microstructures of tantalum manufactured by an ingot metallurgy might degrade the capability of the warhead. Therefore, to overcome such drawbacks, powder metallurgy was incorporated into the near-net shape process in this study. Spark plasma-sintered tantalum and its alloys with finer particle sizes exhibited higher densities and lower grain sizes. However, they were contaminated from the graphite mold during sintering. Higher compaction pressures in die and isostatic compaction techniques also enhanced the sinterability of the tantalum powders; however, a full densification could not be achieved. On the other hand, the powders exhibited full densification after being subjected to hot isostatic pressing over two times. Consequently, it was found that the hot isostatic-pressed tantalum might exhibit a lower grain size and a higher density as compared to those obtained in previous studies.
참고문헌 (19)
- R. Fountaina, "Columbium and tantalum", pp.198~ (1962), John Wiley and Sons
- S. Cardonne, , Int. J. Refract. Met. Hard. Mater, 13, pp.187~ (1995)
- L. Zheng, , Mater. Des, 61, pp.61~ (2014)
- 이지혜, "Kinetic Spray 공정으로 제조된 탄탈륨 코팅층의 열처리 분위기에 따른 미세조직 및 물성", 한국분말재료학회지, 22(1), pp.32~38 (2015), 한국분말재료학회
- 이지혜, "Kinetic Spray 공정을 이용한 벌크형 탄탈륨 소재의 제조및 미세조직", 물성, 2016, pp.23(1), 8~14[DOI]
- H. Park, , Proc. AIP Conf, 1426, pp.1371~ (2012)
- J. Muller, "Tantalum", pp.301~ (1996), Minerals, Metals &Materials Society
- "J. House", Air Force Research Laboratory, ~, pp.AFRL-RWEG-TR-2011-032
- "P. Flater", Air Force Research Laboratory, ~, pp.AFRLRW-EG-TR-2007-7412 (2007)
- "J. House", Air Force Research Laboratory, ~, pp.AFRL-RWEG-TR-2011-032 (2011)
- W. Walters, "Fundamentals of shaped charges" (1989), John Wiley & Sons
- J. Oh, , Mat. Sci. Tech, 29, pp.542~ (2013)
- E. Faccini, "Tantalum", pp.73~ (1996), Minerals, Metals & Materials Society
- J. Muller, "Tungsten and Refractory Metals", pp.573~ (1994), MPIF
- S. Yoo, , Nanostruct. Mater, 12, pp.23~ (1999)
- F. Funkler, "Tungsten and Refractory Metals", pp.531~ (1994), MPIF
- Q. Xu, , Script. Mater, 45, pp.447~ (2001)
- S. Bingert, "Tantalum", pp.95~ (1996), Minerals, Metals & Materials Society