Plasma Spray Forming 공정에 의해 제조된 텅스텐 성형체의 미세조직 형성 거동
Microstructural Evolution of Thick Tungsten Deposit Manufactured by Atmospheric Plasma Spray Forming Route
2
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
Plasma spray forming is recently explored as a near-net-shape fabrication route for ultra-high temperature metals and ceramics. In this study, monolithic tungsten has been produced using an atmospheric plasma spray forming and subsequent high temperature sintering. The spray-formed tungsten preform from different processing parameters has been evaluated in terms of metallurgical aspects, such as density, oxygen content and hardness. A well-defined lamellae structure was formed in the as-sprayed deposit by spreading of completely molten droplets, with incorporating small amounts of unmelted/partially-melted particles. Plasma sprayed tungsten deposit had 84-87% theoretical density and 0.2-0.3 wt.% oxygen content. Subsequent sintering at 2500℃ promoted the formation of equiaxed grain structure and the production of dense preform up to 98% theoretical density
Abstract
Plasma spray forming is recently explored as a near-net-shape fabrication route for ultra-high temperature metals and ceramics. In this study, monolithic tungsten has been produced using an atmospheric plasma spray forming and subsequent high temperature sintering. The spray-formed tungsten preform from different processing parameters has been evaluated in terms of metallurgical aspects, such as density, oxygen content and hardness. A well-defined lamellae structure was formed in the as-sprayed deposit by spreading of completely molten droplets, with incorporating small amounts of unmelted/partially-melted particles. Plasma sprayed tungsten deposit had 84-87% theoretical density and 0.2-0.3 wt.% oxygen content. Subsequent sintering at 2500℃ promoted the formation of equiaxed grain structure and the production of dense preform up to 98% theoretical density
참고문헌 (14)
- E. Y. Ivanov, , Mater. Sci. Eng. A, A251, pp.255~ (1998)
- R. M. German, , Int. J. Powder Metall., 12, pp.115~ (1976)
- N. M. Hwang, , Scripta Mater., 42, pp.421~ (2000)
- Y. Boonyongmaneerat, , J. Mater. Proc. Tech., 209, pp.4084~ (2009)
- M. B. Dickerson, , J. Mater. Sci., 39, pp.6005~ (2004)
- E. P. Kim, , J. Korean Powder Metall. Inst., 5, pp.42~ (1998)
- S. Shi, , J. Min. & Mater. Charac. & Eng., 2, pp.145~ (2003)
- B. Riccardi, , J. Nuclear Mater., 352, pp.29~ (2006)
- R. Hickman, , 39th AIAA, SAE, pp.ASEE Joint Propulsion Conference, 2003
- K. E. Rea, , Mater. Sci. Eng, A, A477, pp.350~ (2008)
- K. H. Baik, , Mater. Trans., 47, pp.1198~ (2006)
- K. H. Baik, , Acta Mater., 52, pp.199~ (2004)
- L. Pawlowski, "The Sience and Engineering of Thermal Spray Coatings" (1995), John Wiley & Sons
- I. Barin, "Thermochemical Data of Pure Substances, 3rd Edition" (1995), VCH