열전도성 점착제 응용을 위한 고분자 기반 탄소나노소재 복합체 제조 및 특성 평가
Fabrication and characterization of polymer-based carbon nanomaterial composites for thermal conductive adhesive application
2
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
A polymer-based carbon nanomaterial composite was fabricated and characterized for the application of a thermal conductive adhesive. Low-dimensional carbon nanomaterials with excellent thermal conductivity such as carbon nanotube (CNT) and graphene were selected as a filler in the composite. Thermal, electrical and adhesive properties of the composite were investigated with respect to the morphology and content of the low-dimensional carbon nanomaterials. As a result, the composite-based adhesive fabricated by the loading of surface-treated MWCNTs of 0.4 wt% showed uniform dispersion, moderate adhesion and effective heat dissipation properties. Finally, it was confirmed through the thermal image analysis of LED module that the temperature reduction of 10°C was achieved using the fabricated composite adhesive with MWCNT-6A. Expecially, heat dissipation performance of the optimized composite adhesive was evident at the hot spot in the module compared to other samples mixed with graphene or different MWCNT loading ratios.
Abstract
A polymer-based carbon nanomaterial composite was fabricated and characterized for the application of a thermal conductive adhesive. Low-dimensional carbon nanomaterials with excellent thermal conductivity such as carbon nanotube (CNT) and graphene were selected as a filler in the composite. Thermal, electrical and adhesive properties of the composite were investigated with respect to the morphology and content of the low-dimensional carbon nanomaterials. As a result, the composite-based adhesive fabricated by the loading of surface-treated MWCNTs of 0.4 wt% showed uniform dispersion, moderate adhesion and effective heat dissipation properties. Finally, it was confirmed through the thermal image analysis of LED module that the temperature reduction of 10°C was achieved using the fabricated composite adhesive with MWCNT-6A. Expecially, heat dissipation performance of the optimized composite adhesive was evident at the hot spot in the module compared to other samples mixed with graphene or different MWCNT loading ratios.
참고문헌 (25)
- A. J. McNamara, "Thermal resistance of thermal conductive adhesive anchored carbon nanotubes interface material", Int. J. Therm. Sci, 96, pp.221~226 (2015)
- K. C. Yung, "Thermal performance of high brightness LED array package on PCB", Int. Commun. Heat Mass Transfer, 37, pp.1266~1272 (2010)
- G. Sui, "Dielectric properties and conductivity of carbon nanofiber", semi-crystalline polymer composites, 2008, pp.56, 2381~2388
- 노재승, "흑연표면의 열방사율 측정시 결정립 배향성의 영향", 한국표면공학회지, 42(2), pp.95~101 (2009), 한국표면공학회
- H. Yu, "Effects of size, shape and floatage of Cu particles on the low infrared emissivity coatings", Progr. Org. Coating., 66, pp.161~166 (2009)
- W. Zhou, "Study on insulating thermal conductive BN", HDPE composites, 2007, pp.452, 36~42
- W. Zhou, "Thermal conductivity of boron nitride reinforced polyethylene composites", Mater. Res. Bull, 42, pp.1863~1873 (2007)
- H. Miyagawa, "Thermophysical properties of epoxy nanocomposites reinforced by carbon nanotubes and vapor grown carbon fibers", Thermochim. Acta, 442, pp.67~73 (2006)
- S. Bellayer, "Characterization of SWCNT and PAN", SWCNT films, 2007, pp.45, 2417~2423
- S. H. Hong, "Encapsulation of multi-walled carbon nanotubes by poly(4-vinylpyridine)and its dispersion stability in various solvent media", Synth. Met, 158, pp.900~907 (2008)
- S. Berber, "Unusually High Thermal Conductivity of Carbon Nanotubes", Phys. Rev. Lett, 84, pp.4613~4616 (2000)
- S. J. Park, "Synthesis and dispersion characteristics of multi-walled carbon nanotube composites with poly(methyl methacrylate)prepared by in-situ bulk polymerization", Macromol. Rapid Commun, 24, pp.1070~1073 (2003)
- K. T. Lau, "Effectiveness of using carbon nanotubes as nano-reinforcements for advanced composite structures", Carbon, 40, pp.1605~1606 (2002)
- Y. S. Song, "Influence of dispersion sates of carbon nanotubes on physical properties of epoxy nanocomposites", Carbon, 43, pp.1378~1385 (2005)
- Q. Chen, "Plasma activation of carbon nanotubes for chemical modification", J. Phys. Chem. B, 105, pp.618~622 (2001)
- W. Trabelsi, "An electrochemical and analytical assessment on the early corrosion behaviour of galvanised steel pretreated with aminosilanes", Surf. Coat. Technol, 192, pp.284~290 (2005)
- M. L. Sham, "Surface functionalities of multi-wall carbon nanotubes after UV", Ozone and TETA treatments, 2006, pp.44, 768~777
- P. C. Ma, "Functionalization of carbon nanotubes using a silane coupling agent", Carbon, 44, pp.3232~3238 (2006)
- J. S. Jang, "A study on the effect of surface treatment of carbon nanotubes for liquid crystalline epoxide–carbon nanotube composites", J. Mater. Chem, 13, pp.676~681 (2003)
- H. Miyagawa, "Thermophysical properties of epoxy nanocomposites reinforced by carbon nanotubes and vapor grown carbon fibers", Thermochim. Acta, 442, pp.67~73 (2006)
- J. C. Grunlan, "Lowering the percolation threshold in carbon black-filled polymer composites", Mat. Res. Soc. Symp. Proc, 576, pp.383~387 (1999)
- M. A. Pimenta, "Studying disorder in graphite-based systems by Raman spectroscopy", Phys. Chem. Chem. Phys, 9, pp.1276~1291 (2007)
- 이상복, "탄소나노튜브 첨가 고분자 나노복합재료의 정량적 분산도 평가", 폴리머, 35(1), pp.60~65 (2011), 한국고분자학회
- J. E. Riggs, "Strong Luminescence of Solubilized Carbon Nanotubes", J. Am. Chem. Soc, 122, pp.5879~5880 (2000)
- Y. Zhou, "Preparation and characterization of polylactic acid(PLA)carbon nanotube nanocomposites", Polymer Testing, 68, pp.34~38 (2018)