그래핀을 이용한 전자패키징 기술 연구 동향
Trends of Researches and Technologies of Electronic Packaging Using Graphene
2
조회
0
다운로드
4
인용
0
참고문헌
키워드
초록
This paper reports the trends of researches and technologies of electronic packaging using graphene. Electronic packaging is to provide the signal and electrical current among electronic components, to remove the heat in electronic systems or components, to protect and support the electronic components from external environment. As the required functions and performances of electronic systems or components increase, the electronic packaging has been intensively attracted attention. Therefore, technologies such as miniaturization, high density, Pb-free material, high reliability, heat dissipation and so on, are required in electronic packaging. Recently, graphene, which is a single twodimensional layer of carbon atoms, has been extensively investigated because of its superior mechanical, electrical and thermal properties. Until now, many studies have been reported the applications using graphene such as flexible display, electrode, super capacitor, composite materials and so on. In this paper, we will introduce and discuss various studies on recent technologies of electronic packaging using graphene for solving the required issues.
Abstract
This paper reports the trends of researches and technologies of electronic packaging using graphene. Electronic packaging is to provide the signal and electrical current among electronic components, to remove the heat in electronic systems or components, to protect and support the electronic components from external environment. As the required functions and performances of electronic systems or components increase, the electronic packaging has been intensively attracted attention. Therefore, technologies such as miniaturization, high density, Pb-free material, high reliability, heat dissipation and so on, are required in electronic packaging. Recently, graphene, which is a single twodimensional layer of carbon atoms, has been extensively investigated because of its superior mechanical, electrical and thermal properties. Until now, many studies have been reported the applications using graphene such as flexible display, electrode, super capacitor, composite materials and so on. In this paper, we will introduce and discuss various studies on recent technologies of electronic packaging using graphene for solving the required issues.
참고문헌 (52)
- "A Theorist’s Pencil and One Layer of Carbon Atoms, Graphene" (2007)[URL]
- K. S. Novoselov, "Electric Field Effect in Atomically Thin Carbon Films", Science, 306, pp.666~ (2004)
- A. K. Geim, "The rise of graphene", Nature, 6, pp.183~ (2007)
- C. Lee, "Measurement of the Elastic Properties and Intrinsic Strength of Monolayer Graphene", Science, 321, pp.385~ (2008)
- S. H. Lee, "Tailored Assembly of Carbon Nanotubes and Graphene", Adv. Funct. Mater, 21, pp.1338~ (2011)
- K. S. Novoselov, "A roadmap for graphene", Nature, 490, pp.192~ (2012)
- D. R. Cooper, "Experimental Review of Graphene", Condens. Matter Phys, 2012, pp.1~ (2012)
- V. Singh, "Graphene based materials: Past, present and future", Mater. Sci, 56, pp.1178~ (2011)
- J. D. Fowler, "Practical Chemical Sensors from Chemically Derived Graphene", ACS Nano, 3, pp.301~ (2009)
- R. Prasher, "Graphene Spreads the Heat", Science, 328, pp.185~ (2010)
- T. Kuila, "Recent Advances in Graphene-based Biosensors", Biosens. Bioelectron, 26, pp.4637~ (2011)
- Y. Lee, "Wafer-Scale Synthesis and Transfer of Graphene Films", Nano Lett, 10, pp.490~ (2010)
- Q. Wu, "Supercapacitors Based on Flexible Graphene", Polyaniline Nanofiber Composite Films, 2010, pp.4, 1963~
- H. Kim, "Graphene", Polymer Nanocomposites, 2010, pp.43, 6515~
- A. C. Ferrari, "Science and technology roadmap for graphene, related two-dimensional crystals, and hybrid systems", Nanoscale, 7, pp.4598~ (2015)
- J. H. Lau, "Low Cost Flip Chip Technologies: for DCA, WLCSP, and PBGA assemblies", pp.1~2 (2000), McGraw-Hill
- S. K. Kang, "(Pb)-Free Solders for Electronic Packaging", J. Electron. Mater, 23(8), pp.701~ (1994)
- M. Abtew, "Lead-free Solders in Microelectronics", Mater. Sci. Eng. R, 27(5), pp.95~ (2000)
- A. Sharma, "Effect of Graphene Nanoplatelets on Wetting, Microstructure, and Tensile Characteristics of Sn-3.0Ag-0.5Cu (SAC) Alloy", Metall. Mater. Trans. A, 47A, pp.494~ (2016)
- L. C. Tsao, "Suppressing effect of 0.5 wt.% nano-TiO2 addition into Sn-3.5Ag-0.5Cu solder alloy on the intermetallic growth with Cu substrate during isothermal aging", J. Alloys Compd, 509, pp.8441~ (2011)
- A. K. Gain, "Effect of additions of ZrO2 nano-particles on the microstructure and shear strength of Sn-Ag-Cu solder on Au", Ni metallized Cu pads, 2011, pp.51, 2306~
- M. G. Cho, "Effects of Minor Additions of Zn on Interfacial Reactions of Sn-Ag-Cu and Sn-Cu Solders with Various Cu Substrates during Thermal Aging", J. Electron. Mater, 36(11), pp.1501~ (2007)
- X. D. Liu, "Effect of graphene nanosheets reinforcement on the performance of Sn-Ag-Cu lead-free solder", Mater. Sci. Eng. A, 562, pp.25~ (2013)
- M. Sobhy, "Effect of Graphene Oxide Nano-Sheets (GONSs) on thermal, microstructure and stress-strain characteristics of Sn-5 wt% Sb-1 wt% Ag solder alloy", J. Mater. Sci. : Mater. Electron, 27, pp.2349~ (2016)
- L. Xu, "Effects of graphene nanosheets on interfacial reaction of Sn-Ag-Cu solder joints", J. Alloys Compd, 650, pp.475~ (2015)
- D. Ma, "Improved microstructure and mechanical properties for Sn58Bi0.7Zn solder joint by addition of graphene nanosheets", J. Alloys. Compd, 671, pp.127~ (2016)
- X. Hua, "Effect of graphene doping on microstructural and mechanical properties of Sn-8Zn-3Bi solder joints together with electromigration analysis", J. Alloys. Compd, 580, pp.162~ (2013)
- L. Y. Xu, "Effect of graphene nanosheets on the corrosion behavior of Sn-Ag-Cu solders", J. Mater Sci : Mater. Electron, 26, pp.5625~ (2015)
- S. W. Jeong, "Effect of Cooling Rate on Growth of the Intermetallic Compound and Fracture Mode of Near-Eutectic Sn-Ag-Cu", Cu Pad: Before and After Aging, 2004, pp.33(12), 1530~
- 이현규, "전해Ni, 무전해 Ni pad에서의 Cu 함량에 따른 접합 신뢰성에 관한 연구", 마이크로전자 및 패키징학회지, 22(3), pp.51~56 (2015), 한국마이크로전자및패키징학회
- 허석환, "ENEPIG 표면처리에서의 Sn-Ag-Cu 솔더조인트 신뢰성: 1. 무전해 Ni-P도금의 두께와 표면거칠기의 영향", 마이크로전자 및 패키징학회지, 21(3), pp.43~50 (2014), 한국마이크로전자및패키징학회[DOI]
- 이태영, "플라즈마 유기막과 OSP PCB 표면처리의 Sn-Ag-Cu 솔더 접합 특성 비교", 마이크로전자 및 패키징학회지, 21(3), pp.25~29 (2014), 한국마이크로전자및패키징학회[DOI]
- Y. C. Sohn, "Spalling of intermetallic compounds during the reaction between lead-free solders and electroless Ni-P metallization", J. Mater. Res, 19(8), pp.2428~ (2004)
- A. Sharif, "Investigation of interfacial reactions between Sn-Zn solder with electrolytic Ni and electroless Ni(P) metallization", J. Alloys Compd, 440, pp.117~ (2007)
- C. E. Ho, "Effect of Cu Concentration on the Reactions between Sn-Ag-Cu Solders and Ni", J. Electron. Mater, 31(6), pp.584~ (2002)
- Y. K. Jee, "Effect of Zn on the intermetallics formation and reliability of Sn-3.5Ag solder on a Cu pad", J. Mater. Res, 22(7), pp.1879~ (2007)
- Y. K. Jee, "Effects of Zn addition on the drop reliability of Sn-3.5Ag-xZn", Ni(P) solder joints, 2007, pp.22(10), 2776~
- 김영민, "Mechanism of the Delayed Growth of Intermetallic Compound at the Interface between Sn-4.0Ag-0.5Cu and Cu-Zn Substrate", Electronic Materials Letters, 6(4), pp.151~154 (2010), 대한금속·재료학회
- Y. H. Ko, "Controlling Interfacial Reactions and Intermetallic Compound Growth at the Interface of a Lead-free Solder Joint with Layer-by-Layer Transferred Graphene", ACS Appl. Mater. Interfaces, 8, pp.5679~ (2016)
- 이기주, "플립칩 패키지에서의 일렉트로마이그레이션 현상", 마이크로전자 및 패키징학회지, 17(4), pp.11~17 (2010), 한국마이크로전자및패키징학회
- J. H. Bong, "Ultrathin graphene and graphene oxide layers as a diffusion barrier for advanced Cu metallization", Appl. Phys. Lett, 106, pp.0632112~ (2015)
- C. G. Kang, "Effects of multi-layer graphene capping on Cu interconnects", Nanotechnology, 24, pp.115707~ (2013)
- S. J. Yoon, "Improved Electromigration-Resistance of Cu Interconnects by Graphene-Based Capping Layer", Proc. 2015 Symposium on VLSI Technology, pp.T124~ (2015), IEEE
- C. P. Wong, "Recent Advances on Polymers and Polymer Nanocomposites for Advanced Electronic Packaging Applications", Proc. 2005 Conference on High Density Microsystem Design and Packaging and Component Failure Analysis, pp.1~ (2005), IEEE
- J. Kim, "The effects of functionalized graphene nanosheets on the thermal and mechanical properties of epoxy composites for anisotropic conductive adhesives (ACAs)", Microelectron. Reliab, 52, pp.595~ (2012)
- N. W. Pu, "Application of nitrogendoped graphene nanosheets in electrically conductive adhesives", Carbon, 67, pp.449~ (2014)
- S. A. Ju, "Graphene-Wrapped Hybrid Spheres of Electrical Conductivity", ACS Appl. Mater. Interfaces, 3, pp.2904~ (2011)
- K. M. F. Shahil, "Thermal properties of graphene and multilayer graphene: Applications in thermal interface materials", Solid State Commun, 152, pp.1331~ (2012)
- K. M. F. Shahil, "Graphene-Multilayer Graphene Nanocomposites as Highly Efficient Thermal Interface Materials", Nano Lett, 12(2), pp.861~ (2012)
- X. Zhang, "Exceptional thermal interface properties of a three-dimensional graphene foam", Carbon, 66, pp.201~ (2014)
- W. P. S. Saw, "Properties of synthetic diamond and graphene nanoplatelet-filled epoxy thin film composites for electronic applications", J. Mater. Sci. : Mater. Electron, 23, pp.817~ (2012)
- Z. Gao, "Thermal chemical vapor deposition grown graphene heat spreader for thermal management of hot spots", Carbon, 61, pp.342~ (2013)