본문 바로가기
KERD
논문KCI 등재

고방열 재료 개발을 위한 에폭시/단일벽 탄소나노튜브 복합체 개발

Development of Epoxy Composites with SWCNT for Highly Thermal Conductivity

유남호|김현일|고흥조
한국복합재료학회 (The Korean Society For Composite Materials)|2020.02|Composites Research|제33권 제1호|pp. 7-12|DOI https://doi.org/10.7234/composres.2020.33.1.007

1

조회

0

다운로드

0

인용

0

참고문헌

키워드

복합재료열전도도액정성 에폭시단일벽 탄소나노튜브
주제분류재료공학

초록

지난 10년간 효율적인 방열 재료 개발을 위해 유망한 매트릭스로서 액정 에폭시 수지(Liquid crystalline epoxy, LCER)는 많은 주목을 받아 왔다. 본 연구에서는 LECR중에서 대표적인 4,4-diglycidyloxybiphenyl (DP) 에폭시를 이용한 고분자/SWCNT 복합체의 합성과 제조 및 특성 분석을 포함한 포괄적 인 연구를 제시한다. 복합 재료의 열전도 특성을 확인해보기 위해 에폭시 수지와 충전제인 단일벽 탄소나노튜브(Single-wall carbon nanotube, SWCNT)로 구성된 복합체 샘플이 준비되었다. 특히 DP 복합체는, LCER의 고도로 정렬 된 미세 구조로 인해 동일한 필러를 사용하는 상업용 에폭시의 복합체에 비해 높은 열 전도성을 보였다. 또한, DP 복합체의 열전도도는 충전제의 양을 조절하여 제어할 수 있으며, 특히 SWCNT의 함량이 50 wt%인 DP 복합체는 열전도도는 2.008 W/mK로 가장 높은 열전도도를 나타내었다.

Abstract

Over the past decade, liquid crystalline epoxy (LCER) has attracted much attention as a promising matrix for the development of efficient heat dissipation materials. This study presents a comprehensive study including synthesis, preparation and chacterization of polymer/inorganic composites using typical 4,4-diglycidyloxybiphenyl (DP) epoxy among LECR. To confirm the thermal conductivity of composite materials, we have prepared composite samples composed of epoxy resin and single-wall carbon nanotube (SWCNT) as a filler. In particular, DP composites exhibit higher thermal conductivity than commercial epoxy composites that use the same type of filler due to the highly ordered microstructure of the LCER. In addition, the thermal conductivity of the DP composite can be controlled by controlling the amount of filler. In particular, the DP composite containing a SWCNT content of 50 wt% has the highest thermal conductivity of 2.008 W/mK.

참고문헌 (34)

  1. Sirringhaus, H., "25th Anniversary Article : Organic Field-effect Transistors : the Path Beyond Amorphous Silicon", Journal of Composite Materials, 26(9), pp.1319~1335 (2014)
  2. You, J. B., "Recent Trends in Polymer Tandem Solar Cells Research", Progress in Polymer Science, 38(12), pp.1909~1928 (2013)
  3. Kaltenbrunner, M., "An Ultra-lightweight Design for Imperceptible Plastic Electronics", Nature, 499(7459), pp.458~463 (2013)
  4. Chen, S. C., "Thermal Analysis of Lithium-ion Batteries", Journal of Power Sources, 140(1), pp.111~124 (2005)
  5. Kizilel, R., "An Alternative Cooling System to Enhance the Safety of Li-ion Battery Packs", Journal of Power Sources, 194(2), pp.1105~1112 (2009)
  6. Han, N., "Improved Heat Dissipation in Gallium Nitride Light-emitting Diodes with Embedded Graphene Oxide Pattern", Nature Communications, 4, pp.1452~ (2013)
  7. Huang, X., "Polyhedral Oligosilsesquioxane-modified Boron Nitride Nanotube Based Epoxy Nanocomposites : An Ideal Dielectric Material with High Thermal Conductivity", Advanced Functional Materials, 23(14), pp.1824~1831 (2013)
  8. Hsiao, M. C., "Thermally Conductive and Electrically Insulating Epoxy Nanocomposites with Thermally Reduced Graphene Oxide-silica Hybrid Nanosheets", Nanoscale, 5(13), pp.5963~5871 (2013)
  9. Raza, M. A., "Effect of Boron Nitride Addition on Properties of Vapour Grown Carbon Nanofiber", rubbery Epoxy Composites for Thermal Interface Applications, 2015, pp.120(4), 9~16
  10. Hu, Y., "A Novel Approach for Al2O3", epoxy Composites with High Strength and Thermal Conductivity, 2016, pp.124(1), 36~43
  11. Yu, W., "Enhanced Thermal Conductive Property of Epoxy Composites by low Mass Fraction of Organic–inorganic Multilayer Covalently Grafted Carbon Nanotubes", Composites Science and Technology, 125(23), pp.116~125 (2013)
  12. Min, C., "A Graphite Nanoplatelet", epoxy Composite with High Dielectric Constant and High Thermal Conductivity, 2013, pp.55, 116~125
  13. Verma, P., "Excellent Electromagnetic Interference Shielding and Mechanical Properties of High Loading Carbon-nanotubes", polymer Composites Designed Using Melt Recirculation Equipped Twin-screw Extruder, 2015, pp.89, 209~317
  14. Chen, Z., "Lightweight and Flexible Graphene Foam Composites for High-performance Electromagnetic Interference Shielding", Advanced Materials, 25(9), pp.1296~1300 (2013)
  15. Akatsuka, M., "Study of High Thermal Conductive Epoxy Resins Containing Controlled High-order Structures", Journal of Applied Polymer Science, 89(9), pp.2464~2467 (2003)
  16. Xie, X., "Thermal Conductivity, Heat Capacity, and Elastic Constants Of Water Soluble Polymers and Polymer Blends", Macromolecules, 49(3), pp.972~978 (2016)
  17. Kim, C. B., "Thermal Conductivity Enhancement of Reduced Graphene Oxide via Chemical Defect Healing for Efficient Heat Dissipation", Carbon, 139, pp.386~392 (2018)
  18. Lu, H., "Significantly Improving Infrared Light Induced Shape Recovery Behavior of Shape Memory Polymeric Nanocomposite via a Synergistic Effect of Carbon Nanotube and Boron Nitride", Composites Part B : Engineering, 62, pp.256~261 (2014)
  19. Jiang, Q., "Mechanical, Electrical and Thermal Properties of Aligned Carbon Nanotube", Polyimide Composites, 2014, pp.56, 408~412
  20. Zhu, H., "Highly Thermally Conductive Papers with Percolative Layered Boron Nitride Nanosheets", ACS Nano, 8(4), pp.3606~3613 (2014)
  21. Song, W. L., "Polymer", Boron Nitride Nanocomposite Materials for Superior Thermal Transport Performance, 2012, pp.51(26), 6498~6501
  22. Carfagna, C., "Liquid Crystalline Epoxy Based Thermosetting Polymers", Progress in Polymer Science, 22(8), pp.1607~1647 (1997)
  23. Barclay, G. G., "Liquid-crystalline and Rigidrod Networks", Progress in Polymer Science, 18(5), pp.899~945 (1993)
  24. Hoyt, A. E., "Rigid Rod Molecules as Liquid Crystal Thermosets. II. Rigid Rod Esters", Journal of Polymer Science Part A : Polymer Chemistry, 28(12), pp.3417~3427 (1990)
  25. Azeez, A. A., "Epoxy Clay Nanocomposites-processing, Properties and Applications : A Review", Composites Part B : Engineering, 45(1), pp.308~320 (2013)
  26. Luo, F. B., "Anisotropic Thermal Conductivity and Flame Retardancy of Nanocomposite Based on Mesogenic Epoxy and Reduced Graphene Oxide Bulk", Composites Science and Technology, 124(23), pp.1~8 (2016)
  27. Harada, M., "Synthesis, Characterization, and Mechanical Properties of a Novel Terphenyl Liquid Crystalline Epoxy Resin", Journal of Applied Polymer Science, 132(1), pp.41296~ (2015)
  28. Yamamoto, H., "Synthesis and Characterization of Novel Liquid Crystalline Epoxy Resin with Low Melting Point", Molecular Crystals and Liquid Crystals, 588(1), pp.41~50 (2014)
  29. Harada, M., "Thermal Conductivity of Liquid Crystalline Epoxy", BN Filler Composites Having Ordered Network Structure, 2013, pp.55, 306~313
  30. Yeo, H., "Characteristic Correlation between Liquid Crystalline Epoxy and Alumina Filler on Thermal Conducting Properties", Composites Science and Technology, 141, pp.99~105 (2017)
  31. Mallakpour, S., "Preparation of Dopamine-functionalized Multi-wall Carbon Nanotube", poly(amideimide)Composites and Their Thermal and Mechanical Properties, 2016, pp.31, 18~30
  32. Sahoo, N. G., "Polymer Nanocomposites Based on Functionalized Carbon Nanotubes", Progress in Polymer Science, 35, pp.837~867 (2010)
  33. Dhall, S., "Effect of Oxide Nanoparticles on Structural Properties of Multiwalled Carbon Nanotubes", Theochem, 1107, pp.300~304 (2016)
  34. Wei, Y., "Stability of Carbon Nanotubes under Electric Field Studied by Scanning Electron Microscopy", Applied Physics Letters, 79, pp.4527~4529 (2001)

관련 논문AI추천

고방열 복합소재 개발을 위한 고열전도성 액정성 에폭시 수지의 개발정진, 고문주, 김영수, 안석훈, 여현욱, 유남호, 이승희, 장세규한국복합재료학회 · Composites Research2017 · 제30권 제1호Phenylcyclohexyl mesogenic moieties를 함유한 고 열전도성 액정성 에폭시 수지의 개발고문주, 김영수, 정이슬한국복합재료학회 · Composites Research2017 · 제30권 제6호열전도성 점착제 응용을 위한 고분자 기반 탄소나노소재 복합체 제조 및 특성 평가윤은혜, 이애리, 이우영, 정구환, 조성일, 허성규, 황재성, Lee Byeong-Joo한국표면공학회 · 한국표면공학회지2020 · 제53권 제4호다중벽 탄소나노튜브와 마이크로미터 크기 실리카 입자로 강화된 에폭시 복합재료의 열 안정성에 관한 연구오륜, 안지호, 유병일, 이교우한국복합재료학회 · Composites Research2016 · 제29권 제5호탄소장섬유와 다중벽 탄소나노튜브가 혼입된 고분자 복합재료의 기계적, 전기적 및 열적 특성김기훈, 김민수, 김성륜, 박종현, 최보경한국복합재료학회 · Composites Research2024 · 제37권 제3호방열소재로의 응용을 위한 고분자 복합소재 내 이방성 필러 구조 제어 연구동향김채빈, 민성배한국복합재료학회 · Composites Research2022 · 제35권 제6호

이 간행물의 다른 논문 (5건)

탄소나노튜브의 함량에 따른 항공기용 탄소나노튜브/폴리우레탄 탑코트의 접착 및 전기적 특성 평가김소연, 김종현, 신평수, 박종만pp. 1-6CFRP 적용을 위한 Carbon NCF Prepreg 제작 및 구조해석을 활용한 적층패턴 최적설계 연구신헌충, 하성규, 김신pp. 13-18용매 증발 과정 중 마이크로웨이브 처리가 PVDF 복합재료 필름의 결정화 형태에 미치는 영향김성수, 홍현수pp. 19-24산화주석을 함유한 열경화성 액정 에폭시의 열적 특성에 관한 연구현하늘, 조승현pp. 25-29단방향 연속 섬유 복합재 횡단면에서 섬유 배열에 따른 응력 분포 변화최수훈, 지우석pp. 30-37
원문 보기