탄소 나노 물질의 형상에 따른 구리/탄소나노물질 하이브리드 필러의 전도성 향상 거동 분석
Effects of Morphologies of Carbon Nanomaterials on Conductivity of Composites Containing Copper/Carbon Nanomaterial Hybrid Fillers
1
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
In the present study, we develop a conductive copper/carbon nanomaterial additive and investigate the effects of the morphologies of the carbon nanomaterials on the conductivities of composites containing the additive. The conductive additive is prepared by mechanically milling copper powder with carbon nanomaterials, namely, multi-walled carbon nanotubes (MWCNTs) and/or few-layer graphene (FLG). During the milling process, the carbon nanomaterials are partially embedded in the surfaces of the copper powder, such that electrically conductive pathways are formed when the powder is used in an epoxy-based composite. The conductivities of the composites increase with the volume of the carbon nanomaterial. For a constant volume of carbon nanomaterial, the FLG is observed to provide more conducting pathways than the MWCNTs, although the optimum conductivity is obtained when a mixture of FLG and MWCNTs is used.
Abstract
In the present study, we develop a conductive copper/carbon nanomaterial additive and investigate the effects of the morphologies of the carbon nanomaterials on the conductivities of composites containing the additive. The conductive additive is prepared by mechanically milling copper powder with carbon nanomaterials, namely, multi-walled carbon nanotubes (MWCNTs) and/or few-layer graphene (FLG). During the milling process, the carbon nanomaterials are partially embedded in the surfaces of the copper powder, such that electrically conductive pathways are formed when the powder is used in an epoxy-based composite. The conductivities of the composites increase with the volume of the carbon nanomaterial. For a constant volume of carbon nanomaterial, the FLG is observed to provide more conducting pathways than the MWCNTs, although the optimum conductivity is obtained when a mixture of FLG and MWCNTs is used.
참고문헌 (21)
- K. Y. Park, , Compos. Struct., 81, pp.401~ (2007)
- J. S. Im, , Carbon, 47, pp.2640~ (2009)
- Y. Huang, , Carbon, 45, pp.1614~ (2007)
- D. D. L. Chung, , Carbon, 39, pp.279~ (2001)
- 이시은, "고분자 복합재의 물리화학적 및 전자파차폐 특성에 미치는 탄소나노튜브의 불소화 영향", 폴리머, 39(1), pp.114~121 (2015), 한국고분자학회[DOI]
- P. M. Ajayan, , Science, 265, pp.1212~ (1994)
- O. Lourie, , Phys. Rev. Lett., 81, pp.1638~ (1998)
- P. C. Ma, , Carbon, 46, pp.1497~ (2008)
- D. Zhao, , Microelectron. Eng., 96, pp.71~ (2012)
- S. G. Shin, , Met. Mater. Int., 7, pp.605~ (2001)
- M. Mecklenburg, , Adv. Mater., 24, pp.3486~ (2012)
- T. Uchida, , J. Appl. Polym. Sci., 98, pp.985~ (2005)
- E. Jeong, , Colloid Surf., A, 377, pp.243~ (2011)
- 이상의, "다중벽 탄소나노튜브", 에폭시 복합재료의 유전율에 관한 연구, 2004, pp.17(3), 38~44[DOI]
- J. M. Kim, , J. Korean Weld. Joi. Soc., 25, pp.133~ (2007)
- 이민재, "Development of Carbon Nanotube-copper Hybrid Powder as Conductive Additive", 한국분말재료학회지, 25(4), pp.291~295 (2018), 한국분말재료학회[DOI]
- H. J. Choi, , J. Mater. Res, 24, pp.2610~ (2009)
- C. Casiraghi, , Phys. Rev., B, 72, pp.085401~ (2005)
- A. C. Ferrari, , Phys. Rev. Lett., 97, pp.187401~ (2006)
- S. Berber, , Physica B, 376-377, pp.272~ (2006)
- N. Hu, , Acta Mater, 56, pp.2929~ (2008)