경계윤활에서 기계 부품 소재의 트라이볼로지적 특성에관한 연구
Study on Tribological Characteristics of Machine Componentin Boundary Lubrication
2
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
The friction and wear between machine components directly influence the energy loss and failure in various machines. Therefore, there is always a demand for finding methods to reduce friction and wear. Of the possible methods, lubrication is a widely used method for reducing friction and wear. In the case of lubrication, it is important to analyze the tribological behavior in the boundary lubrication because most of friction and wear occurs in the boundary lubrication regime. Cast iron has been regarded as a good material for industrial applications due to the excellent mechanical properties and high productivity. Especially, nodular cast iron is a material that shows better mechanical properties and wear-resistance compared with cast iron due to inclusion of spheroidal graphite. In this work, we investigated the tribological characteristics of nodular cast iron with respect to different counter parts in boundary lubrication regime. Sliding tests were conducted with SUJ2, ZrO2, Si3N4balls as counter parts using a pin-on-disk type tribotester. The results showed different friction and wear behaviors with different counter parts. The case of ZrO2 showed the lowest wear rate in specimen and no significant ball wear. In case of SUJ2, it showed similar wear rate with ZrO2 case in specimen and the highest friction coefficient. The case of Si3N4 showed the lowest friction coefficient, 33% lower than the case of SUJ2. It showed 16.9 times larger wear rate in specimen and 43% larger wear rate in ball compared to that of the SUJ2 case.
Abstract
The friction and wear between machine components directly influence the energy loss and failure in various machines. Therefore, there is always a demand for finding methods to reduce friction and wear. Of the possible methods, lubrication is a widely used method for reducing friction and wear. In the case of lubrication, it is important to analyze the tribological behavior in the boundary lubrication because most of friction and wear occurs in the boundary lubrication regime. Cast iron has been regarded as a good material for industrial applications due to the excellent mechanical properties and high productivity. Especially, nodular cast iron is a material that shows better mechanical properties and wear-resistance compared with cast iron due to inclusion of spheroidal graphite. In this work, we investigated the tribological characteristics of nodular cast iron with respect to different counter parts in boundary lubrication regime. Sliding tests were conducted with SUJ2, ZrO2, Si3N4balls as counter parts using a pin-on-disk type tribotester. The results showed different friction and wear behaviors with different counter parts. The case of ZrO2 showed the lowest wear rate in specimen and no significant ball wear. In case of SUJ2, it showed similar wear rate with ZrO2 case in specimen and the highest friction coefficient. The case of Si3N4 showed the lowest friction coefficient, 33% lower than the case of SUJ2. It showed 16.9 times larger wear rate in specimen and 43% larger wear rate in ball compared to that of the SUJ2 case.
참고문헌 (18)
- 김광일, "Characterization of Durability of Coatings for Cell Phone Cover by Wear, Erosion, and Pull-off Tests", International Journal of Precision Engineering and Manufacturing, 13(9), pp.1633~1639 (2012), 한국정밀공학회
- Holmberg, K., "Influence of Tribology on Global Energy Consumption, Costs and Emissions", Friction, 5(3), pp.263~284 (2017)
- 한도렬, "인산을 이용한 법랑 코팅의 초윤활성 및초기 시간에 대한 연구", 한국트라이볼로지학회지, 34(6), pp.235~240 (2018), 한국트라이볼로지학회[DOI]
- 강은구, "Plasma Diode Electron Beam Heat Treatment of Cast Iron: Effect of Direct Preheating", International Journal of Precision Engineering and Manufacturing, 18(10), pp.1339~1345 (2017), 한국정밀공학회
- Vadiraj, A., "Wear and Friction Behavior of Alloyed Gray Cast Iron with Solid Lubricants under Boundary Lubrication", Tribol. Int, 44(10), pp.1168~1173 (2011)
- Aal, A. A., "Enhancement of Wear Resistance of Ductile Cast Iron by Ni–SiC Composite Coating", Wear, 260(9-10), pp.1070~1075 (2006)
- Straffelini, G., "Dry Rolling-sliding Wear of Austempered Cast Iron", Wear, 271(9-10), pp.1602~1608 (2011)
- Giacomelli, R. O., "Topography Evolution and Friction Coefficient of Gray and Nodular Cast Irons with Duplex Plasma Nitrided + DLC Coating", Surf. Coat. Technol., 314, pp.18~27 (2017)
- 남재현, "Effect of Groove Surface on Friction Noise and Its Mechanism", International Journal of Precision Engineering and Manufacturing, 18(8), pp.1165~1172 (2017), 한국정밀공학회
- Nunez, E. E., "Tribological Study of High Bearing Blended Polymer-based Coatings for Air-conditioning and Refrigeration Compressors", Surf. Coat. Technol., 205(8-9), pp.2994~3005 (2011)
- Nakano, M., "Applying Micro-Texture to Cast Iron Surfaces to Reduce the Friction Coefficient Under Lubricated Conditions", Tribol. Lett, 28(2), pp.131~137 (2007)
- 이현화, "Friction and Wear Characteristics of Surface-Modified Titanium Alloy for Metal-on-Metal Hip Joint Bearing", International Journal of Precision Engineering and Manufacturing, 19(6), pp.917~924 (2018), 한국정밀공학회
- 홍석준, "윤활제 특성에 따른 시트 리클라이너 부품의 마찰 및 마모 특성", 한국트라이볼로지학회지, 35(3), pp.183~189 (2019), 한국트라이볼로지학회[DOI]
- 임태윤, "ZnDTP를 첨가한 혼합윤활유(광유", 식물성 오일)의 마모, 산화 및 전단 특성, 2018, pp.34(4), 160~167[DOI]
- Yuan-ming Li, "Friction and Wear Characteristics of 20Cr Steel Substrate and TiAlN Coating under Different Lubrication Conditions", International Journal of Precision Engineering and Manufacturing, 19(10), pp.1521~1528 (2018), 한국정밀공학회
- Jeon, H. G., "The Evaluation of Wear Life Based on Accelerated Test through Analysis of Correlation between Wear Rate and Lubricant Film Parameter", Tribol. Trans., 56(2), pp.290~300 (2013)
- Liu, L., "Wear Model Based on Real-time Surface Roughness and Its Effect on Lubrication Regimes", Tribol. Int., 126, pp.16~20 (2018)
- Eyre, T. S., "Wear Characteristics of Metals", Tribol. Int., 9(5), pp.203~212 (1976)