Control of Surface Energy using Bilayer Metallic Film Heterostructures
1
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
Surface energy is an important factor in determining the performance of application components in terms of preventing adhesion failure between thin films. In this regard, numerous attempts have been made to acquire the desired surface energy through chemical treatment or by using micro/nanostructures. However, such approaches are expected to provide extreme values of surface energy, which may not be suitable in achieving the enhanced performance of applications. In this study, we propose a method to control surface energy by using bilayer metallic film heterostructures. We measure the water contact angle of incompatible (Ni/Ag) and compatible (Zn/Ag) metal pairs under several experimental factors, including thickness, time, and temperature. Furthermore, we conduct Auger electron spectroscopy measurements to investigate the atomic concentration with respect to depth after the change in the water contact angle. The experimental results reveal that three parameters, namely, compatibility, film thickness, and environmental temperature, are major factors in controlling the water contact angle. Thus, we experimentally demonstrate that controlling these three parameters can provide the approximate desired water contact angle. This result is expected to aid in the performance enhancement of a wide range of application components, where control of surface energy is required.
Abstract
Surface energy is an important factor in determining the performance of application components in terms of preventing adhesion failure between thin films. In this regard, numerous attempts have been made to acquire the desired surface energy through chemical treatment or by using micro/nanostructures. However, such approaches are expected to provide extreme values of surface energy, which may not be suitable in achieving the enhanced performance of applications. In this study, we propose a method to control surface energy by using bilayer metallic film heterostructures. We measure the water contact angle of incompatible (Ni/Ag) and compatible (Zn/Ag) metal pairs under several experimental factors, including thickness, time, and temperature. Furthermore, we conduct Auger electron spectroscopy measurements to investigate the atomic concentration with respect to depth after the change in the water contact angle. The experimental results reveal that three parameters, namely, compatibility, film thickness, and environmental temperature, are major factors in controlling the water contact angle. Thus, we experimentally demonstrate that controlling these three parameters can provide the approximate desired water contact angle. This result is expected to aid in the performance enhancement of a wide range of application components, where control of surface energy is required.
참고문헌 (15)
- Mo, J., "Fluid release pressure for nanochannels: the Young-Laplace equation using the effective contact angle", Nanoscale, 11(17), pp.8408~8415 (2019)
- Zhao, T., "Contact angle measurement of natural materials", Colloids and Surfaces B: Biointerfaces, 161, pp.324~330 (2018)
- 윤민아, "전사 방법에 따른 그래핀의 표면 에너지 변화", 한국트라이볼로지학회지, 35(1), pp.9~15 (2019), 한국트라이볼로지학회[DOI]
- 웬당쾅, "Colloidal Probe 원자현미경을 이용한 2차전지 전극용 폴리머 바인더의 응착 및 마찰 특성 평가", 한국트라이볼로지학회지, 35(3), pp.169~175 (2019), 한국트라이볼로지학회[DOI]
- Bien-Cuong Tran Khac, "구형 및 평면 원자현미경 탐침에 대한 2차원 소재의 마찰 특성", 한국트라이볼로지학회지, 35(4), pp.199~205 (2019), 한국트라이볼로지학회[DOI]
- 이의영, "Application of ta-C Coating on WC Mold to Molded Glass Lens", 한국트라이볼로지학회지, 35(2), pp.106~113 (2019), 한국트라이볼로지학회[DOI]
- Tenjimbayashi, M., "Simultaneous Detection and Repair of Wetting Defects in Superhydrophobic Coatings via Cassie-Wenzel Transitions of Liquid Marbles", Adv. Funct. Mater., pp.1900688~ (2019)
- Cai, Y., "Effects of hydrophilic", hydrophobic properties on the water behavior in the micro-channels of a proton exchange membrane fuel cell, 2006, pp.161(2), 843~848
- Vilardell, A., "Osteoblastic cell response on high-rough titanium coatings by cold spray", Journal of Materials Science: Materials in Medicine, 29(2), pp.19~ (2018)
- Fontana, G, "In 2018 International Conference on Manipulation, Auto- mation and Robotics at Small Scales (MARSS)", IEEE, 1~6 (2018)
- Mogi, K., "Electrowetting on Dielectric (EWOD) Device with Dimple Structures for Highly Accurate Droplet Manipulation", Applied Sciences, 9(12), pp.2406~ (2019)
- Shin, D. -G., "Assessment of nano-scale tribological and mechanical properties of flexible transparent polymers based on atomic force microscopy", CIRP Annals, 68(1), pp.599~602 (2019)
- Mittal, K. L., "Advances in contact angle, wettability and adhesion" (2015), John Wiley & Sons
- Bhushan, B., "Principles and applications of tribology" (1999), John Wiley & Sons
- Huhtamäki, T., "Surface-wetting characterization using contact-angle measurements", Nat. Protoc., 13(7), pp.1521~ (2018)