코팅 및 표면 처리된 강의 고하중 영역에서의 마모 마찰 특성
Friction and Wear Behavior of Coating and Surface Treated Steel for Low Velocity High Pressure Application
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
Friction and wear behavior of hard coated and surface treated steel with candidate processing methods for low velocity high pressure application investigated. Wear tests were carried out under specific region considering the operation condition of construction equipments under lubricated and unlubricated condition. Different tribological behavior analyzed with comparing the wear rate of counter part, morphology and topography of worn surface and the worn volume of samples and counter parts.
Abstract
Friction and wear behavior of hard coated and surface treated steel with candidate processing methods for low velocity high pressure application investigated. Wear tests were carried out under specific region considering the operation condition of construction equipments under lubricated and unlubricated condition. Different tribological behavior analyzed with comparing the wear rate of counter part, morphology and topography of worn surface and the worn volume of samples and counter parts.
참고문헌 (11)
- Naofumi Hiraoka, "Wear Life Mechanism of Journal Bearing with Bonded MoS2 Film Lubricants in Air and Vacuum", Wear, 249, pp.1014~1020 (2002)
- Massimo Del Din, "Wear Characteristics with Mixed Lubrication Conditions in a Full Scale Journal Bearing", Wear, 232, pp.192~198 (1999)
- V.V. Kharlamov, "Friction and Wear Model of a Heavy Loaded Sliding Pair Part III.Application to a Lubricated Plane Bearing", Wear, 241, pp.65~78 (2000)
- Padelis G. Nikolakopoulos, "A Study of Friction in Worn Misaligned Journal Bearings under Severe Hydrodynamic Lubrication", Tribology International, 41, pp.461~472 (2008)
- Jan Ukonsaari, "Wear and Friction of Synthetic Esters in a Boundary Lubricated Journal Bearing", Tribology International, 36, pp.821~826 (2003)
- N.M. Renevier, "Advantages of Using Selflubricating,Hard,Wear-resistant MoS2-based Coatings", Surface and Coatings Technology, 142, pp.67~77 (2001)
- Naofumi Hiraoka, "Wear Life Mechanism of Journal Bearings with Bonded MoS2 Film Lubricants in Air and Vacuum", Wear, 249, pp.1014~1020 (2002)
- D. J. Hargreaves, "A New Model for Combined Couette and Poiseuille Flows in the Transverse Groove of a Plane Inclined Slider Bearing", Tribology International, 31, pp.297~303 (1998)
- Ertug ˘rul Durak and Fazll Duran, "Tribological and Fatigue Failure Properties of Porous P", M Bearing, 2008, pp.30, 745~755
- K.Gururajan, "Roughness Effects in a Narrow Porous Journal Bearing with Arbitrary Porous Wall Thickness", International Journal of Mechanical Sciences, 44, pp.1003~1016 (2002)
- Y.H. Qiang, "Microstructure and tribological properties of complex nitrocarburized steel", Journal of Materials Processing Technology, 101, pp.180~185 (2000)