Tin Sulphide Thin Films Formed by Sulphidising D.C. Magnetron Sputtered layers of Tin Using H2S
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
Thin films of tin sulphide (SnS) have been formed by a novel 2-stage process where-in D.C. magnetron sputtering was used to deposit to thin films of tin (Sn) and the layers then sulphidised using 5% hydrogen sulphide (H2S) gas in Argon. Although it was not found possible to deposit high quality thin films of tin directly onto glass substrates, excellent layers of tin were produced by using molybdenum (Mo) coated glass as the substrate material. The chemical and physical properties of the SnS layers formed were determined using scanning electron microscopy, energy dispersive x-ray analysis, x-ray diffraction studies and using reflectance versus wavelength measurements and these related to the conditions of synthesis. The data shows that it should be possible to produce conventional “substrate structure” devices based on the use of this technology.
Abstract
Thin films of tin sulphide (SnS) have been formed by a novel 2-stage process where-in D.C. magnetron sputtering was used to deposit to thin films of tin (Sn) and the layers then sulphidised using 5% hydrogen sulphide (H2S) gas in Argon. Although it was not found possible to deposit high quality thin films of tin directly onto glass substrates, excellent layers of tin were produced by using molybdenum (Mo) coated glass as the substrate material. The chemical and physical properties of the SnS layers formed were determined using scanning electron microscopy, energy dispersive x-ray analysis, x-ray diffraction studies and using reflectance versus wavelength measurements and these related to the conditions of synthesis. The data shows that it should be possible to produce conventional “substrate structure” devices based on the use of this technology.
참고문헌 (9)
- R.W. Miles, "Thin Film Solar Cells Based on the use of Polycrystalline Thin Film Materials", Chapter 1, Organic Nanostructured Thin Film Devices and Coatings for Clean Energy, CRC, 1~56 (2010)
- R.W.Miles, "Inorganic Solar Cells", Materials Today, 10(11), pp.20~27 (2007)
- K.T. Ramakrishna Reddy, "Thin Films of Tin Sulphide for Application in Photovoltaic Solar Cells, Photovoltaics, Applications and Impact", pp.1~27, Nova Science Publishers, Inc
- Robert W. Miles, "Thermally Evaporated Thin Films of SnS for Application in Solar Cell Devices", Thin Solid Films, 517, pp.4702~4705 (2009)
- K.T. Ramakrishna Reddy, "Photovoltaic Properties of SnS Based Solar Cells", Solar Energy Materials and Solar Cells, 90(18), pp.3041~3046 (2006)
- A.Tanuseski, "Optical and Photoelectric Properties of SnS Thin Films Prepared by Chemical Bath Deposition", Semiconductor Science and Technology, 18(6), pp.501~ (2003)
- M.Ichimura, "Electrochemical Deposition of SnS Thin Films", Thin Solid Films, 361, pp.98~101 (2000)
- K.T. Ramakrishna Reddy, "Formation of Polycrystalline SnS Layers by a Two-Step Process Using Graphite Box", Thin Solid Films, 403, pp.116~119 (2002)
- J.J. Scragg, "Synthesis and Characterisation of Cu4ZnSnS4 Absorber Layers by an Electrodeposition-Annealing Route", Thin Solid Films, 517, pp.2481~2484 (2009)