화학제염공정에서 환원공정조건에 따른 Inconel 600의 부식손상 특성
Corrosion Damage Characteristics of Inconel 600 with Reduction Conditions in Chemical Decontamination Process
1
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
In this study, we evaluated tendency and degree of corrosion damages of Inconel 600 after chemical decontamination treatments under three different conditions. In the decontamination processes, the oxidation and reduction were performed as one cycle. Each process was continued up to 5 cycles. Characteristics of corrosion under decontamination processes were evaluated by Tafel analysis and weight loss. Characteristics of surface damage were observed by scanning electron microscope(SEM) and three-dimensional(3D) microscope. As the cycle proceeded, weight loss and corrosion current density increased. Intergranular corrosion damage occurred on the surface of the materials. The result revealed that the surface of Inconel 600 was attacked by the strong acid solution under all chemical decontamination processes, but the degree of the corrosion damage was different depending on the processes.
Abstract
In this study, we evaluated tendency and degree of corrosion damages of Inconel 600 after chemical decontamination treatments under three different conditions. In the decontamination processes, the oxidation and reduction were performed as one cycle. Each process was continued up to 5 cycles. Characteristics of corrosion under decontamination processes were evaluated by Tafel analysis and weight loss. Characteristics of surface damage were observed by scanning electron microscope(SEM) and three-dimensional(3D) microscope. As the cycle proceeded, weight loss and corrosion current density increased. Intergranular corrosion damage occurred on the surface of the materials. The result revealed that the surface of Inconel 600 was attacked by the strong acid solution under all chemical decontamination processes, but the degree of the corrosion damage was different depending on the processes.
참고문헌 (11)
- 송종순, "원전 제염기술 및 해외경험 분석을 통한 1차 계통 제염 적용 연구", 방사성폐기물학회지, 14(1), pp.45~55 (2016), 한국방사성폐기물학회[DOI]
- 정준영, "Corrosion Properties of Inconel-600 and 304 Stainless Steel in New Oxidative and Reductive Decontamination Reagent", Metals and Materials International, 21(4), pp.678~685 (2015), 대한금속·재료학회[DOI]
- Hong-Joo Lee, "An Electrochemical Study of Stainless Steels and a Nickel Alloy in a Decontamination Agent Using the Potentiodynamic Method", Korean Journal of Chemical Engineering, 21(4), pp.895~900 (2004), 한국화학공학회
- R. A. Speranzini, "Decontamination effectiveness of mixtures of citric acid, oxalic acid and EDTA (No. AECL--10109)" (1990), Atomic Energy of Canada Ltd
- 김성종, "가장 가혹한 조건에서 화학 제염한 경우 냉각재 펌프용 스테인리스강의 안정성 평가", 해양환경안전학회지, 12(4), pp.253~259 (2006), 해양환경안전학회
- 김성종, "원자로 냉각재 펌프용 스테인리스강에 대한 화학적 제염 공정 개발", 한국표면공학회지, 40(5), pp.234~240 (2007), 한국표면공학회
- 김성종, "침적식 화학적 제염 공정 시 원자로 냉각재 펌프용 스테인리스강의 안전성 평가", CORROSION SCIENCE AND TECHNOLOGY, 10(5), pp.167~174 (2011), 한국부식방식학회
- E. B. Borghi, "Cleaning of stainless steel surfaces and oxide dissolution by malonic and oxalic acids", J. nucl. mater., 229, pp.115~123 (1996)
- 정준영, "환원제염조건에서 가압경수로 구조재료의 틈부식 특성", 방사성폐기물학회지, 12(3), pp.199~209 (2014), 한국방사성폐기물학회[DOI]
- N. M. Martyak, "Electrochemical polymerization of aniline from an oxalic acid medium", Prog. Org. Coat., 45, pp.23~32 (2002)
- M. Faiz, "Specialty Polymers: Materials and Applications", pp.175~ (2007), I.K. International Publishing House Pvt. Ltd