침적식 초음파-화학 제염 시 재료 및 공정 시간에 따른 부식 손상 특성
Corrosion Damage Characteristics with Materials and Process Time in Ultrasonic-Chemical Decontamination of Immersion Type
2
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
In this study, we carried out an ultrasonic-chemical decontamination process with immersion type, reproduced in the laboratory. The corrosion damage characteristics, depending on kind of materials and ultrasonic process time, were investigated. Inconel 600, which showed lower corrosion potential and higher corrosion current density than that of STS 316, revealed severer corrosion damage and higher weight-loss rate than STS 316. Weight-loss rate of Inconel 600 increased with increasing ultrasonic process time. On the other hands, STS 316 presented a negligibly small corrosion damage, which was almost indistinguishable from visual observation. There was no effect of ultrasonic process time on the weight-loss rate of STS 316.
Abstract
In this study, we carried out an ultrasonic-chemical decontamination process with immersion type, reproduced in the laboratory. The corrosion damage characteristics, depending on kind of materials and ultrasonic process time, were investigated. Inconel 600, which showed lower corrosion potential and higher corrosion current density than that of STS 316, revealed severer corrosion damage and higher weight-loss rate than STS 316. Weight-loss rate of Inconel 600 increased with increasing ultrasonic process time. On the other hands, STS 316 presented a negligibly small corrosion damage, which was almost indistinguishable from visual observation. There was no effect of ultrasonic process time on the weight-loss rate of STS 316.
참고문헌 (15)
- W. K. Kratzer, "Decontamination and decommissioning of nuclear facilities", pp.107~115 (1980), Plenum Press
- Literature review of dilute chemical decontamination processes for water-cooled nuclear reactors, "G. R. Choppin", Electric Power Research Institute, ~, pp.EPRI NP-1033 (1979)
- 송종순, "원전 제염기술 및 해외경험 분석을 통한 1차 계통 제염 적용 연구", Journal of Nuclear Fuel Cycle and Waste Technology, 14(1), pp.45~55 (2016), 한국방사성폐기물학회[DOI]
- C. H. Jung, "Decontamination of radioactive corrosion products by KAERI decontamination process,", J. of Korea Inst. of Resources Recycling, 9, pp.20~29 (1999)
- E. Baumgartner, "Heterogeneous electron transfer as a pathway in the dissolution of magnetite in oxalic acid solutions", Inorg. Chem., 22, pp.2224~2226 (1983)
- A. Cruickshank, "Developing techniques for decontamination", Nucl. Eng. Int., 28, pp.41~44 (1983)
- C. H. Jung, "Decontamination of radioactive corrosion products by KAERI decontamination process", J. of Korean Inst. of Resources Recycling, 8, pp.20~29 (1999)
- 김성종, "원자로 냉각재 펌프용 스테인리스강에 대한 화학적 제염 공정 개발", 한국표면공학회지, 40(5), pp.234~240 (2007), 한국표면공학회
- 김성종, "원자로 냉각재 펌프용 스테인리스강에 대한 화학적 제염 공정 개발 (Ⅱ)", 한국표면공학회지, 40(6), pp.271~278 (2007), 한국표면공학회
- Source book for chemical decontamination of nuclear power plants, "C. J. Wood", Electric Power Research Inst, 118~, pp.EPRI-NP-6433 (1989)
- E. B. Borghi, "Cleaning of stainless steel surfaces and oxide dissolution by malonic and oxalic acids", J. Nucl. Mater., 229, pp.115~123 (1996)
- 정준영, "Corrosion Properties of Inconel-600 and 304 Stainless Steel in New Oxidative and Reductive Decontamination Reagent", Metals and Materials International, 21(4), pp.678~685 (2015), 대한금속·재료학회[DOI]
- N. D. Tomashov, "Development of the electrochemical theory of metallic corrosion", Corrosion, 20, pp.7t~14t (1964)
- L. L. Shreir, "Corrosion: metal", environment reactions, newness-butterworths, 1976, pp.3~
- Properties of austenitic stainless steels and their weld metals(Influence of Slight Chemistry Variations), "J. J. Echenrod", American society for testing and materials, 17~ (1979)