침적식 화학적 제염 공정 시 원자로 냉각재 펌프용 스테인리스강의 안전성 평가
Evaluation on Safety of Stainless Steels in Chemical Decontamination Process with Immersion Type of Reactor Coolant Pump for Nuclear Reactor
2
조회
0
다운로드
2
인용
0
참고문헌
키워드
초록
Due to commercialization of nuclear power, most countries have taken interest in decontamination process of nuclear power plant and tried to develop a optimum process. Because open literature of the decontamination process are rare, it is hard to obtain skills on decontamination of foreign country and it is necessarily to develop proper chemical decontamination process system in Korea. In this study, applicable possibility in chemical decontamination for reactor coolant pump (RCP) was investigated for the various stainless steels. The stainless steel (STS) 304 showed the best electrochemical properties for corrosion resistance and the lowest weight loss ratio in chemical decontamination process with immersion type than other materials. However, the pitting corrosion was generated in both STS 415 and STS 431 with the increasing numbers of cycle. The intergranular corrosion in STS 431 was sporadically observed. The sizes of their pitting corrosion also increased with increasing cycle numbers.
Abstract
Due to commercialization of nuclear power, most countries have taken interest in decontamination process of nuclear power plant and tried to develop a optimum process. Because open literature of the decontamination process are rare, it is hard to obtain skills on decontamination of foreign country and it is necessarily to develop proper chemical decontamination process system in Korea. In this study, applicable possibility in chemical decontamination for reactor coolant pump (RCP) was investigated for the various stainless steels. The stainless steel (STS) 304 showed the best electrochemical properties for corrosion resistance and the lowest weight loss ratio in chemical decontamination process with immersion type than other materials. However, the pitting corrosion was generated in both STS 415 and STS 431 with the increasing numbers of cycle. The intergranular corrosion in STS 431 was sporadically observed. The sizes of their pitting corrosion also increased with increasing cycle numbers.
참고문헌 (20)
- The head office of atomic energy, The replacement of TVCS for reactor collent pump, "Korea power generation public affairs", ~ (1995)
- Jee-Yong Park, "Effect of the Cooling Rates on the Corrosion Resistance and Phase Transformation of 14Cr-3Mo Martensitic Stainless Steel", CORROSION SCIENCE AND TECHNOLOGY, 5(1), pp.1~4 (2006), 한국부식방식학회
- JeeYong Park, "Effect of the heat treatment parameters on the phase transformationand corrosion resistance of Fe-14Cr-3Mo martensitic stainless steel", CORROSION SCIENCE AND TECHNOLOGY, 6(2), pp.56~61 (2007), 한국부식방식학회
- Chan-Jin Park, , Corros. Sci. Tech, 2, pp.18~ (2003)
- Kwangik Kim, , Corros. Sci. Tech, 2, pp.75~ (2003)
- The center of maintenance technology for atomic energy, "Hanjeon KPS", Development of apparatus and processing on reactor collent pump for nuclear reactor, ~ (1997)
- J. Horvath, , J. Electrochem. Soc, 115, pp.791~ (1968)
- N. D. Tomashov, , Corrosion, 20, pp.166~ (1964)
- Environment Reactions, vol. I, "Corrosion, Metal", pp.1976, J. E. Truman
- J. J. Eckenrod, "in properties of austenitic stainless steels and their weld metals, In ASTM STP 679", pp.17~ (1979), ASTM
- R. J. Brigham, , Mater. Perform, 13, pp.29~ (1974)
- J. E. Truman, , Br. corrosion J, 12, pp.236~ (1977)
- Stress corrosion cracking resistance stainless steel SCR-3, , Sumitomo metal industries Ltd., ~, pp.Report CE-06-703 (1975)
- B. E. Wilde, , Corrosion, 42, pp.147~ (1986)
- N. Bui, , Corrosion, 39, pp.491~ (1983)
- H. Okamoto, , Amagasaki, 54, pp.21~ (1993)
- A. John Sedriks, "Corrosion of stainless steels", pp.246~ (1996), Wiley Interscience
- M. Okabe, , proceedings of international conference on stainless steels, pp.602~ (1991), ISIJ
- T. Thorvaldsson, , Scripta Metall, 18, pp.739~ (1984)
- J. J. Heger, , Corrosion, 11, pp.22~ (1955)