Al-Si계 합금의 분말 크기 및 조성에 따른 반사율 변화 특성
Reflectance Characteristics of Al-Si based Alloys according to Powder Size and Composition
1
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
In this study, the effects of powder size and composition on the reflectance of Al-Si based alloys are presented. First, the reflectance of Al-Si bulk and powder are analyzed to confirm the effect of powder size. Results show that the bulk has a higher reflectance than that of powder because the bulk has lower surface defects. In addition, the larger the particle size, the higher is the reflectance because the interparticle space decreases. Second, the effect of composition on the reflectance by the changing composition of Al-Si-Mg is confirmed. Consequently, the reflectance of the alloy decreases with the addition of Si and Mg because dendrite Si and Mg2Si are formed, and these have lower reflectance than pure Al. Finally, the reflectance of the alloy is due to the scattering of free electrons, which is closely related to electrical conductivity. Measurements of the electrical conductivity based on the composition of the Al-Si-Mg alloy confirm the same tendency as the reflectance.
Abstract
In this study, the effects of powder size and composition on the reflectance of Al-Si based alloys are presented. First, the reflectance of Al-Si bulk and powder are analyzed to confirm the effect of powder size. Results show that the bulk has a higher reflectance than that of powder because the bulk has lower surface defects. In addition, the larger the particle size, the higher is the reflectance because the interparticle space decreases. Second, the effect of composition on the reflectance by the changing composition of Al-Si-Mg is confirmed. Consequently, the reflectance of the alloy decreases with the addition of Si and Mg because dendrite Si and Mg2Si are formed, and these have lower reflectance than pure Al. Finally, the reflectance of the alloy is due to the scattering of free electrons, which is closely related to electrical conductivity. Measurements of the electrical conductivity based on the composition of the Al-Si-Mg alloy confirm the same tendency as the reflectance.
참고문헌 (15)
- J. J. Lewandowski, , Annu. Rev. Mater. Res, 46, pp.151~ (2016)
- W. E. Frazier, , J. Mater. Eng. Perform, 23, pp.1917~ (2014)
- F. R. Collins, , Weld. J, 45, pp.241~ (1966)
- N. Kaufmann, , Phys. Procedia, 83, pp.918~ (2016)
- J. R. Davis, "Alloying: Understanding the Basics", pp.351~ (1993), ASM International
- W. D. Callister, Jr, "Materials Science and Engineering: An Introduction", pp.5~ (2007), John Wiley & Sons
- J. H. Martin, , Nature, 549, pp.365~ (2017)
- D. Manfredi, "Additive Manufacturing of Al Alloys and Aluminium Matrix Composites (AMCs)", pp.3~ (2014), INTECH, Inc.
- M. N. Ervina Efzan, , Adv. Mater. Res, 845, pp.355~ (2014)
- C. H. Caceres, , Metall. Mater. Trans. A, 30, pp.2611~ (1999)
- H. R. Ammar, , Mater. Sci. Eng. A, 489, pp.426~ (2008)
- M. Shamsuzzoha, , J. Cryst. Growth, 112, pp.635~ (1991)
- N.D. Mermin, "Solid state physics", pp.671~ (1976), Holt, Rinehart and Winston
- M. G. Blaber, , J. Phys. Chem. C, 113, pp.3041~ (2009)
- M. H. Mulazimoglu, , Metall. Trans. A, 20, pp.383~ (1989)