금속산화물 분말의 동결건조 및 수소환원에 의한 Mo-Cu 다공체 제조
Fabrication of Porous Mo-Cu by Freeze Drying and Hydrogen Reduction of Metal Oxide Powders
1
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
In this study, porous Mo-5 wt% Cu with unidirectionally aligned pores is prepared by freeze drying of camphene slurry with MoO3-CuO powders. Unidirectional freezing of camphene slurry with dispersion stability is conducted at -25oC, and pores in the frozen specimens are generated by sublimation of the camphene crystals. The green bodies are hydrogen-reduced at 750oC and sintered at 1000oC for 1 h. X-ray diffraction analysis reveals that MoO3- CuO composite powders are completely converted to a Mo-and-Cu phase without any reaction phases by hydrogen reduction. The sintered bodies with the Mo-Cu phase show large and aligned parallel pores to the camphene growth direction as well as small pores in the internal walls of large pores. The pore size and porosity decrease with increasing composite powder content from 5 to 10 vol%. The change of pore characteristics is explained by the degree of powder rearrangement in slurry and the accumulation behavior of powders in the interdendritic spaces of solidified camphene.
Abstract
In this study, porous Mo-5 wt% Cu with unidirectionally aligned pores is prepared by freeze drying of camphene slurry with MoO3-CuO powders. Unidirectional freezing of camphene slurry with dispersion stability is conducted at -25oC, and pores in the frozen specimens are generated by sublimation of the camphene crystals. The green bodies are hydrogen-reduced at 750oC and sintered at 1000oC for 1 h. X-ray diffraction analysis reveals that MoO3- CuO composite powders are completely converted to a Mo-and-Cu phase without any reaction phases by hydrogen reduction. The sintered bodies with the Mo-Cu phase show large and aligned parallel pores to the camphene growth direction as well as small pores in the internal walls of large pores. The pore size and porosity decrease with increasing composite powder content from 5 to 10 vol%. The change of pore characteristics is explained by the degree of powder rearrangement in slurry and the accumulation behavior of powders in the interdendritic spaces of solidified camphene.
참고문헌 (16)
- Y. -L. Shen, , Metall. Mater. Trans. A, 25, pp.839~ (1994)
- 강현지, "MoO3-CuO 혼합분말의 볼 밀링 및 수소분위기 열처리에 의한 Mo-Cu 복합분말 제조", 한국분말재료학회지, 25(4), pp.322~326 (2018), 한국분말재료학회[DOI]
- J. L. Johnson, , Metall. Mater. Trans. A, 32, pp.605~ (2001)
- W. S. Wang, , Metall. Mater. Trans. A, 29, pp.1509~ (1998)
- K. C. Jeon, , Int. J. Refract. Met. Hard Mater, 53, pp.32~ (2015)
- T. Fukasawa, , J. Am. Ceram. Soc, 84, pp.230~ (2001)
- K. Araki, , J. Am Ceram. Soc, 88, pp.1108~ (2005)
- S. Deville, , Adv. Eng. Mater, 10, pp.155~ (2008)
- S. -T. Oh, , Trans. Nonferrous Met. Soc. China, 22, pp.s688~ (2012)
- O. Mengual, , Talanta, 50, pp.445~ (1999)
- M. Wi niewska, , Powder Technol, 198, pp.258~ (2010)
- W. V. Schulmeyer, , Int. J. Refract. Met. Hard Mater, 20, pp.261~ (2002)
- G. Fierro, , J. Catal, 148, pp.709~ (1994)
- K. Araki, , J. Am. Ceram. Soc, 87, pp.2014~ (2004)
- D. R. Uhlmann, , J. Appl. Phys, 35, pp.2986~ (1964)
- S. Deville, , Nature Mater, 8, pp.966~ (2009)