Effect of Water Impingement Conditions on the Degradation of Epoxy Coatings in Tap Water
0
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
The water-jet technique started by Bridgman can cut metal and alloys without harmful gas and fume. However, while this technique is convenient to cut metals and alloys, in the case of coated pipe, water jet induces the degradation of coatings on the pipes, and may facilitate structural failure, leakage, and loss of products. While there are many reports on the effect of water jet on cut metals and the damage of metallic materials, research on the effect of water impingement on the epoxy coatings has been little studied. In this work, we therefore control the velocity of water jet, distance between nozzle and specimen, and water temperature, and discuss the effect of water impingement on the epoxy coatings. Increasing water velocity and water temperature and reducing nozzle distance increased the degradation rates of three epoxy coatings were increased. Among three test parameters – water velocity, nozzle distance and water temperature,water temperature was relatively effective to increase the degradation rate of epoxy coatings.
Abstract
The water-jet technique started by Bridgman can cut metal and alloys without harmful gas and fume. However, while this technique is convenient to cut metals and alloys, in the case of coated pipe, water jet induces the degradation of coatings on the pipes, and may facilitate structural failure, leakage, and loss of products. While there are many reports on the effect of water jet on cut metals and the damage of metallic materials, research on the effect of water impingement on the epoxy coatings has been little studied. In this work, we therefore control the velocity of water jet, distance between nozzle and specimen, and water temperature, and discuss the effect of water impingement on the epoxy coatings. Increasing water velocity and water temperature and reducing nozzle distance increased the degradation rates of three epoxy coatings were increased. Among three test parameters – water velocity, nozzle distance and water temperature,water temperature was relatively effective to increase the degradation rate of epoxy coatings.
참고문헌 (30)
- Srdjan Nešić, "Key issues related to modelling of internal corrosion of oil and gas pipelines – A review", Corrosion Science, 49(12), pp.4308~4338 (2007), Elsevier BV[DOI]
- 정진아, "자연해수 내 탄소강의 전기화학적 분극실험에 관한 연구", 한국마린엔지니어링학회지, 42(4), pp.274~279 (2018), 한국마린엔지니어링학회[DOI]
- Dinesh Keloth Kaithari, "Development of Corrosion Resistance Coatings for Sea Water Pipeline", International Journal of Students' Research in Technology & Management, 4(2), pp.24~29 (2016), GIAP Journals[DOI]
- Yi Huang, "Experimental study on seawater-pipeline internal corrosion monitoring system", Sensors and Actuators B: Chemical, 135(1), pp.375~380 (2008), Elsevier BV[DOI]
- 이성열, "선박 해수배관에서 용접봉의 종류에 따라 직류 아크 용접한 용접부위의 부식특성에 관한 전기화학적 평가", 한국해양공학회지, 27(3), pp.79~84 (2013), 한국해양공학회
- F. W. Fink, "Saline water conversion", American Chemical Society, 1, pp.27~ (1960)[DOI]
- 김성종, "선박의 해양 부식과 부식방지 장치", 한국표면공학회지, 44(3), pp.105~116 (2011), 한국표면공학회
- 정진아, "탄소강 해수배관 내면 방식을 위한 불용성 양극의 음극방식 효과", 한국마린엔지니어링학회지, 42(4), pp.280~286 (2018), 한국마린엔지니어링학회[DOI]
- C. Chandrasekaran, "Anticorrosive rubber lining", pp.43~49 (2017), Elsevier Science
- J. W. Kim, "Protection Technique by coating and lining", Journal of the Korean Society of Marine Engineers, 24, pp.539~ (2000)[DOI]
- M. S. Camila, "Coatings for saltwater pipelines", International Journal of Advanced Engineering Research and Science, 5, pp.266~ (2018)[DOI]
- I. Tzanakis, "Evaluation of Cavitation Erosion Behavior of Commercial Steel Grades Used in the Design of Fluid Machinery", Metallurgical and Materials Transactions A, 48(5), pp.2193~2206 (2017), Springer Science and Business Media LLC[DOI]
- 선효성, "Numerical study of hydrofoil geometry effect on cavitating flow", Journal of Mechanical Science and Technology, 26(8), pp.2535~2545 (2012), 대한기계학회
- F Galliano, "Evaluation of corrosion protection properties of additives for waterborne epoxy coatings on steel", Progress in Organic Coatings, 44(3), pp.217~225 (2002), Elsevier BV[DOI]
- A. Talo, "Corrosion protective polyaniline epoxy blend coatings on mild steel", Synthetic Metals, 102(1-3), pp.1394~1395 (1999), Elsevier BV[DOI]
- V.B. Mišković-Stanković, "Corrosion protection of aluminium by a cataphoretic epoxy coating", Progress in Organic Coatings, 36(1-2), pp.53~63 (1999), Elsevier BV[DOI]
- 장익준, "Effects of Ultrasonic Amplitude on Electrochemical Properties During Cavitation of Carbon Steel in 3.5% NaCl Solution", CORROSION SCIENCE AND TECHNOLOGY, 19(4), pp.163~173 (2020), 한국부식방식학회[DOI]
- 장익준, "Ultrasonic Cavitation Behavior and its Degradation Mechanism of Epoxy Coatings in 3.5 % NaCl at 15 oC", CORROSION SCIENCE AND TECHNOLOGY, 20(1), pp.26~36 (2021), 한국부식방식학회[DOI]
- 전종모, "Effect of Solution Temperature on the Cavitation Corrosion Properties of Carbon Steel and its Electrochemical Effect", CORROSION SCIENCE AND TECHNOLOGY, 20(6), pp.325~334 (2021), 한국부식방식학회[DOI]
- 전종모, "Effect of Solution Temperature on the Cavitation Degradation Properties of Epoxy Coatings for Seawater Piping", CORROSION SCIENCE AND TECHNOLOGY, 20(6), pp.335~346 (2021), 한국부식방식학회[DOI]
- 박일초, "대형요트의 내구성 향상을 위한 도장작업의 최적화 및 캐비테이션 침식 특성", 대한용접접합학회지, 37(3), pp.254~261 (2019), 대한용접접합학회[DOI]
- 이정형, "해수 내 초음파 진동 캐비테이션에 의한 폴리우레탄 수지 도막의 내캐비테이션 성능 평가", 대한용접접합학회지, 37(5), pp.455~462 (2019), 대한용접접합학회[DOI]
- Shuji Hattori, "Cavitation erosion resistance of plastics", Wear, 271(7-8), pp.1103~1108 (2011), Elsevier BV[DOI]
- 김성종, "431 스테인리스강의 해수 내 적용 전류밀도 및 캐비테이션 시간 변수에 따른 표면손상 특성", 한국마린엔지니어링학회지, 38(7), pp.883~889 (2014), 한국마린엔지니어링학회[DOI]
- F.T Cheng, "Correlation of cavitation erosion resistance with indentation-derived properties for a NiTi alloy", Scripta Materialia, 45(9), pp.1083~1089 (2001), Elsevier BV[DOI]
- Martin Rein, "Phenomena of liquid drop impact on solid and liquid surfaces", Fluid Dynamics Research, 12(2), pp.61~93 (1993), IOP Publishing[DOI]
- 박강수, "연마제 워터젯을 이용한 복합재 미세가공의 백화현상에 대한 연구", 한국생산제조학회지, 16(5), pp.183~190 (2007), 한국생산제조학회
- Jyoti Bhandari, "Modelling of pitting corrosion in marine and offshore steel structures – A technical review", Journal of Loss Prevention in the Process Industries, 37, pp.39~62 (2015), Elsevier BV[DOI]
- "ISO 16925, Paints and varnishes — Determination of the resistance of coatings to pressure water-jetting", ~ (2014)
- Report on the Evaluation of Lining Materials for the Inside Coating of Seawater Piping of Kori #3 and #4 Nuclear Power Plants, Final Report, "Y. S. Kim", KEPCO E&C, Feb, 157~ (2020)