Ultrasonic Cavitation Behavior and its Degradation Mechanism of Epoxy Coatings in 3.5 % NaCl at 15 oC
0
조회
0
다운로드
5
인용
0
참고문헌
키워드
초록
Pipes operating in the seawater environment faces cavitation degradation and corrosion of the metallic component,as well as a negative synergistic effect. Cavitation degradation shows the mechanism by which materials deteriorate by causing rapid change of pressure or high-frequency vibration in the solution, and introducing the formation and explosion of bubbles. In order to rate the cavitation resistance of materials, constant conditions have been used. However, while a dynamic cavitation condition can be generated in a real system, there has been little reported on the effect of ultrasonic amplitude on the cavitation resistance and mechanism of composites. In this work, 3 kinds of epoxy coatings were used, and the cavitation resistance of the epoxy coatings was evaluated in 3.5% NaCl at 15 oC using an indirect ultrasonic cavitation method. Eleven kinds of mechanical properties were obtained, namely compressive strength, flexural strength and modulus, tensilestrength and elongation, Shore D hardness, water absorptivity, impact test, wear test for coating only and pull-off strength for epoxy coating/carbon steel or epoxy coating/rubber/carbon steel. The cavitation erosion mechanism of epoxy coatings was discussed on the basis of the mechanical properties and the effect of ultrasonic amplitude on the degradation of coatings.
Abstract
Pipes operating in the seawater environment faces cavitation degradation and corrosion of the metallic component,as well as a negative synergistic effect. Cavitation degradation shows the mechanism by which materials deteriorate by causing rapid change of pressure or high-frequency vibration in the solution, and introducing the formation and explosion of bubbles. In order to rate the cavitation resistance of materials, constant conditions have been used. However, while a dynamic cavitation condition can be generated in a real system, there has been little reported on the effect of ultrasonic amplitude on the cavitation resistance and mechanism of composites. In this work, 3 kinds of epoxy coatings were used, and the cavitation resistance of the epoxy coatings was evaluated in 3.5% NaCl at 15 oC using an indirect ultrasonic cavitation method. Eleven kinds of mechanical properties were obtained, namely compressive strength, flexural strength and modulus, tensilestrength and elongation, Shore D hardness, water absorptivity, impact test, wear test for coating only and pull-off strength for epoxy coating/carbon steel or epoxy coating/rubber/carbon steel. The cavitation erosion mechanism of epoxy coatings was discussed on the basis of the mechanical properties and the effect of ultrasonic amplitude on the degradation of coatings.
참고문헌 (28)
- Wen Deng, "Cavitation erosion behavior of ceramic", organic coatings exposed to artificial seawater, 2020, pp.399, 126133~[DOI]
- Il-Cho Park, "Effect of stabilizer concentration on the cavitation erosion resistance characteristics of the electroless nickel plated gray cast iron in seawater", Surface and Coatings Technology, 376, pp.31~37 (2019), Elsevier BV[DOI]
- Il-Cho Park, "Effect of pH of the sulfuric acid bath on cavitation erosion behavior in natural seawater of electroless nickel plating coating", Applied Surface Science, 483, pp.194~204 (2019), Elsevier BV[DOI]
- L.L. Silveira, "Study of the corrosion and cavitation resistance of HVOF and HVAF FeCrMnSiNi and FeCrMnSiB coatings", Surface and Coatings Technology, 374, pp.910~922 (2019), Elsevier BV[DOI]
- 선효성, "Numerical study of hydrofoil geometry effect on cavitating flow", Journal of Mechanical Science and Technology, 26(8), pp.2535~2545 (2012), 대한기계학회
- Dmitry G. Shchukin, "Ultrasonic Cavitation at Solid Surfaces", Advanced Materials, 23(17), pp.1922~1934 (2011), Wiley[DOI]
- A. Thiruvengadam, "A Unified Theory of Cavitation Damage", Journal of Basic Engineering, 85(3), pp.365~373 (1963), ASME International[DOI]
- M. S. Plesset, , Mater. Sci, 77, pp.1055~ (1955)
- Brijesh Vyas, "Cavitation erosion of face centered cubic metals", Metallurgical Transactions A, 8(6), pp.915~923 (1977), Springer Science and Business Media LLC[DOI]
- 장익준, "Effects of Ultrasonic Amplitude on Electrochemical Properties During Cavitation of Carbon Steel in 3.5% NaCl Solution", CORROSION SCIENCE AND TECHNOLOGY, 19(4), pp.163~173 (2020), 한국부식방식학회[DOI]
- 정진아, "탄소강 해수배관 내면 방식을 위한 불용성 양극의 음극방식 효과", 한국마린엔지니어링학회지, 42(4), pp.280~286 (2018), 한국마린엔지니어링학회[DOI]
- 이성열, "선박 해수배관에서 용접봉의 종류에 따라 직류 아크 용접한 용접부위의 부식특성에 관한 전기화학적 평가", 한국해양공학회지, 27(3), pp.79~84 (2013), 한국해양공학회
- 정재현, "교류 피복아크 용접에 의한 해수 배관 용접부위의 부식 특성 평가", 한국마린엔지니어링학회지, 37(8), pp.877~885 (2013), 한국마린엔지니어링학회[DOI]
- Yi Huang, "Experimental study on seawater-pipeline internal corrosion monitoring system", Sensors and Actuators B: Chemical, 135(1), pp.375~380 (2008), Elsevier BV[DOI]
- Victor Lefèvre, "Cavitation in rubber: an elastic instability or a fracture phenomenon?", International Journal of Fracture, 192(1), pp.1~23 (2015), Springer Science and Business Media LLC[DOI]
- Liquid Impingement and Cavitation Studies of Erosion Resistance of Rubber-coated materials for B. F. Goodrich, "F. G. Hammitt", The University of Michigan, ~, pp.Report No. UMICH-324490-1-T (1970)
- Wen Deng, "A new methodology to prepare ceramic-organic composite coatings with good cavitation erosion resistance", Ultrasonics Sonochemistry, 44, pp.115~119 (2018), Elsevier BV[DOI]
- Shuji Hattori, "Cavitation erosion resistance of plastics", Wear, 271(7-8), pp.1103~1108 (2011), Elsevier BV[DOI]
- Development of a cavitation erosion resistant advanced material system, "K. H. Light", The University of Maine, ~, pp.Project No. UM-MACH-RPT-01-05 (2005)
- "Standard Test Method for Compressive Properties of Rigid Plastics", ASTM D695, ~ (2015)
- "Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials", ASTM D790, ~ (2017)
- "Standard Test Method for Tensile Properties of Plastics", ASTM D638, ~ (2014)
- "Standard Test Method for Rubber Property—Durometer Hardness", ASTM D2240, ~ (2015)
- "KS F4936, Coating materials for the protection of concrete", Korean Industrial Standards, ~ (2018)
- "Standard Test Method for Resistance of Organic Coatings to the Effects of Rapid Deformation (Impact)", ASTM D2794, ~ (2019)
- "Abrasion Resistance of Organic Coatings by Taber Abraser", ASTM D4060, ~ (2007)
- "Standard Test Method for Pull-Off Strength of Coatings Using Portable Adhesion Testers", ASTM D4541, ~ (2017)
- "Standard Test Method for Cavitation Erosion Using Vibratory Apparatus", ASTM G32, ~ (2016)