8 MW급 대용량 풍력발전기용 요 감속기 치합전달오차에 따른 응답해석에 관한 연구
A Study on Response Analysis by Transmission Error of Yaw Drive for 8 MW Large Capacity Wind Turbines
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
This study performed a response analysis according to the transmission error of the yaw drive. To perform the response analysis, the excitation source of the transmission error was modeled and the outer ring of the first stage bearing and the outer ring of the output shaft bearing were used as measurement positions. The response results were analyzed based on the vibration tolerance values of AGMA 6000-B96. As a result of the response of the first stage bearing outer ring, the maximum displacement of the first stage planetary gear system was 5.59 and the maximum displacement of the second to fourth stage planetary gear systems was 4.21 ㎛ , 3.13 ㎛ , and 25.6 ㎛ . In the case of the output shaft bearing outer ring, the maximum displacement of the first stage planetary gear system was 1.73 ㎛, and the maximum displacement of the second to fourth stage planetary gear system was 1.94 ㎛, 0.73 ㎛, and 2.03 ㎛. According to AGMA 6000-B96, the vibration tolerance of first stage is 17.5 ㎛, and the vibration tolerance of the second to fourth stages is 58 ㎛, 80 ㎛, and 375 ㎛, which shows that the vibration tolerance is satisfied and it is safe.
Abstract
This study performed a response analysis according to the transmission error of the yaw drive. To perform the response analysis, the excitation source of the transmission error was modeled and the outer ring of the first stage bearing and the outer ring of the output shaft bearing were used as measurement positions. The response results were analyzed based on the vibration tolerance values of AGMA 6000-B96. As a result of the response of the first stage bearing outer ring, the maximum displacement of the first stage planetary gear system was 5.59 and the maximum displacement of the second to fourth stage planetary gear systems was 4.21 ㎛ , 3.13 ㎛ , and 25.6 ㎛ . In the case of the output shaft bearing outer ring, the maximum displacement of the first stage planetary gear system was 1.73 ㎛, and the maximum displacement of the second to fourth stage planetary gear system was 1.94 ㎛, 0.73 ㎛, and 2.03 ㎛. According to AGMA 6000-B96, the vibration tolerance of first stage is 17.5 ㎛, and the vibration tolerance of the second to fourth stages is 58 ㎛, 80 ㎛, and 375 ㎛, which shows that the vibration tolerance is satisfied and it is safe.
참고문헌 (11)
- "FIRETRACE International" (2020)[URL]
- D. Chouhan., "Modal & Harmonic Response Analysis of Two Stage Gearbox-Using Ansys", International Journal for Research Trends and Innovation, 3(7), pp.253~259 (2018)
- R. Ranjan., "Harmonic Response Analysis of Gearbox", Journal of Engineering and Applied Sciences, 12(14), pp.4293~4297 (2017)
- M. Evans., "Modal Analysis to Minimize Gearbox Induced Noise of General Electric Wind Turbines", Master, pp.2013
- M. Saritas., "Finite element stress analysis of three-stage gearbox", Nigde Omer Halisdemir University Journal of Engineering Sciences, pp.787~790 (2021)
- Lee. D. H., "A Study on the Vibrational Characteristics of a Gearbox for Epicyclic Gear Train", Transactions of the KSME, pp.837~842 (2000)
- Kim. J. S., "Study of Dynamic Characteristics of 2. 5MW Wind Turbine Gearbox", Journal of Ocean Engineering and Technology, 28(4), pp.314~323 (2014)
- F. Vanhollebeke., "Combining Multibody and Acoustic Simulation Models for Wind Turbine Gearbox NVH Optimisation", International Conference on Noise and Vibration Engineering, pp.4459~4467 (2012)
- Kim. I. H., "Yaw Gearbox Design for 4MW Class Wind Turbine", Journal of Convergence for Information Technology, 12(2), pp.142~148 (2022)
- Jang. S. W., "A Study on the Safety Evaluation of the Pitch Reducer for 8 MW Large Capacity Wind Turbines", Journal of Wind Energy, 13(4), pp.90~97 (2023)
- "AGMA 6000-B96, Specification for Measurement of Linear Vibration on Gear Units", ~ (1996)