8 MW급 대용량 풍력발전기용 피치감속기 안전성 평가에 관한 연구
A Study on the Safety Evaluation of the Pitch Reducer for 8 MW Large Capacity Wind Turbines
0
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
In this paper, a study was conducted to evaluate the safety of pitch reducers for 8 MW class wind turbines. The housing and carrier of the pitch reducer were subjected to structural analysis for the ultimate load by load duration distribution (LDD). As a result of the finite element analysis of the housing parts, the part with the highest stress was the output housing, and the equivalent stress was 522.4 MPa and the safety factor was 1.14. As a result of finite analysis of the carrier, the highest stress occurred at 80.5 MPa in the first carrier, and the safety factor was 10.3. In addition, extreme strength and life analysis by LDD load were performed for gears and bearings included in each stage. The strength analysis of the planetary gear train was conducted based on ISO 6336, and the stability evaluation of the bearings through life analysis based on ISO 281 found all to be safe.
Abstract
In this paper, a study was conducted to evaluate the safety of pitch reducers for 8 MW class wind turbines. The housing and carrier of the pitch reducer were subjected to structural analysis for the ultimate load by load duration distribution (LDD). As a result of the finite element analysis of the housing parts, the part with the highest stress was the output housing, and the equivalent stress was 522.4 MPa and the safety factor was 1.14. As a result of finite analysis of the carrier, the highest stress occurred at 80.5 MPa in the first carrier, and the safety factor was 10.3. In addition, extreme strength and life analysis by LDD load were performed for gears and bearings included in each stage. The strength analysis of the planetary gear train was conducted based on ISO 6336, and the stability evaluation of the bearings through life analysis based on ISO 281 found all to be safe.
참고문헌 (18)
- Nam. J. S., "Loading Test Results of Wind Turbine Pitch", Yaw Bearing, 2012, pp.3(1), 61~67
- Kim. Y. C., "A Study on the Gear Train Design for Blade Adjustment of 4MW class Wind Turbine", Master, pp.2021
- 김정길, "유전 알고리즘을 이용한 풍력발전기용 피치감속기의 최적 설계", 대한기계학회논문집 A, 38(2), pp.185~192 (2014), 대한기계학회
- Robert G. Parker., "Dynamic Response of a Planetary Gear System using a Finite Element", Contact Mechanics Model, 2000, pp.122, 304~310
- Analysis of Structural Characteristics of Power-Split Type Planetary Gear Train, "Lee. K. H.", Korean Society for New and Renewable Energy, 311~314 (2008)
- 김영진, "풍력발전기용 피치베어링의 하중분배, 접촉 및 피로수명 해석", 한국트라이볼로지학회지, 29(1), pp.33~38 (2013), 한국트라이볼로지학회[DOI]
- Peter J. Schubel, "Wind Turbine Blade Design", Energies, 5, pp.3425~3449 (2012)
- 김동영, "5MW 풍력용 Pitch Drive 구성품의 부하에 관한 연구", 한국기계가공학회지, 13(1), pp.115~120 (2014), 한국기계가공학회
- 양용군, "Study on Bearing Life Calculation for Wind Turbine Gearbox", 한국기계가공학회지, 13(5), pp.21~27 (2014), 한국기계가공학회[DOI]
- "ISO 281, International Standard, Rolling Bearings-Dynamic Load Rating Life", ~ (2007)
- The study for helical gear bending sress, "Lee. J. H.", The Korean Society of Mechanical Engineers, ~ (2014)
- "ISO 6336-3, International Standard, Calculation of Load Capacity of Spur and Helical Gears-Calculation of Tooth Bending Strength", ~ (1996)
- Korean Register, "Technical Guidelines for Offshore Wind Turbine", 197~ (2011)
- "ANSYS workbench"[URL]
- "JIS G 5502, Japanese Industrial Standard, Spherodial Graphite Iron Castings", ~ (2015)
- "JIS G 4053, Japanese Industrial Standard, Spherodial Graphite Iron Castings", ~ (2015)
- "ISO 1083, International Standard, Spheroidal graphite cast irons-Classification", ~ (1987)
- "GL Guide Line, Guideline for the Cerification of WindTurbines", ~ (2010)