CMT 공정조건에 따른 용접부 특성 분석
Analysis of Welding Characteristics According to CMT Process Conditions
1
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
Stainless steel is used in many industrial fields due to its excellent properties such as workability, strength, ductility, and corrosion resistance, and various properties required in the manufacturing field depending on the constituent components. pump impellers used in seawater and underwater require high corrosion resistance and high rigidity to prevent corrosion and damage, so they are a representative part group to which Stainless materials are applied. Through the introduction of the CMT(Cold Metal Transfer) process, a manufacturing method through WAAM(Wire Arc Additive Manufacturing) technology, which has advantages of lower production cost and excellent fatigue strength compared to the existing casting method, is being proposed. Recently, prior research on the WAAM process has been conducted on various materials, but most of the research results published so far are focused on the DED(Direct Energy Deposition) process, and a good WAAM shape design study using austenitic stainless steel is lacking. in this study, using the CMT process, the relationship between the change in bead shape and process parameters was confirmed in the BoP(Bead on Plate) welding experiment using wire made of austenitic stainless steel STS-308.
Abstract
Stainless steel is used in many industrial fields due to its excellent properties such as workability, strength, ductility, and corrosion resistance, and various properties required in the manufacturing field depending on the constituent components. pump impellers used in seawater and underwater require high corrosion resistance and high rigidity to prevent corrosion and damage, so they are a representative part group to which Stainless materials are applied. Through the introduction of the CMT(Cold Metal Transfer) process, a manufacturing method through WAAM(Wire Arc Additive Manufacturing) technology, which has advantages of lower production cost and excellent fatigue strength compared to the existing casting method, is being proposed. Recently, prior research on the WAAM process has been conducted on various materials, but most of the research results published so far are focused on the DED(Direct Energy Deposition) process, and a good WAAM shape design study using austenitic stainless steel is lacking. in this study, using the CMT process, the relationship between the change in bead shape and process parameters was confirmed in the BoP(Bead on Plate) welding experiment using wire made of austenitic stainless steel STS-308.
참고문헌 (13)
- 이진우, "듀플렉스 스테인리스강 소재를 응용한 Semi-Open Type 임펠러의 성능 평가", 한국해양공학회지, 28(4), pp.345~350 (2014), 한국해양공학회
- 강남현, "오스테나이트계 스테인리스강의 소재개발 및 용접기술", 대한용접접합학회지, 28(1), pp.10~14 (2010), 대한용접접합학회
- 김지선, "WAAM을 이용한 AL5053 적층부 단면형상 분석 및 적층 효율에 관한 연구", 한국기계기술학회지, 22(5), pp.821~826 (2020), 한국기계기술학회[DOI]
- 정성민, "레이저 및 TIG 용접된 오스테나이트계 스테인리스강의 기계적 특성에 대한 연구", 동력시스템공학회지, 23(2), pp.27~36 (2019), 한국동력기계공학회[DOI]
- D. Tang, "Contrasting Study on Quality of SUS301L–HT Joint Fiber Laser Welding and MIG Welding", Chin J Laser, 42(7), pp.36~38 (2015)
- 박정웅, "극후물재 용접부 내부잔류응력 측정기술 및 특성", 대한용접접합학회지, 34(2), pp.16~21 (2016), 대한용접접합학회
- 황승연, "가변극성을 이용한 알루미늄 5183 와이어의 아크 적층 공정에서 EP", EN 비율의 영향 평가, 2020, pp.38(2), 180~186[DOI]
- T. Ron, "Environmental Behavior of Low Carbon Steel Produced by a Wire Arc Additive Manufacturing Process", Metals, 9(8), pp.888~ (2019)
- X. Fang, "Correlations between Microstructure characteristics and mechanical properties in 5183 aluminium alloy fabricated by wire-arc additive manufacturing with different arc modes", Materials, 11(11), pp.2075~ (2018)
- 이태현, "아크열원 DED 공법의 STS 316L 와이어송급 적층공정 및 기계적물성 평가", 대한용접접합학회지, 36(3), pp.23~30 (2018), 대한용접접합학회[DOI]
- 김지선, "WAAM(wire arc additive manufacturing)을 이용해 적층된 Ni-Al-Bronze 블럭의 기계적 특성 분석", 한국기계기술학회지, 22(5), pp.959~964 (2020), 한국기계기술학회[DOI]
- B. Cong, "Influence of cold metal transfer process and its heat input on weld bead geometry and porosity of aluminum-copper alloy welds", Rare Met. Mater. Eng, 45(3), pp.606~611 (2016)
- C. Zhang, "Wire arc additive manufacturing of Al-6Mg alloy using variable polarity cold metal transfer arc as power source", Mater. Sci. Eng, 711, pp.415~423 (2018)