선박용 열교환기 스테인리스 소재의 GTAW 파이프 용접(6g) 연구
Experimental Study of GTAW Pipe Welding(6g) of Stainless Steel for Ship Heat Exchanger
0
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
A heat exchanger refers to a pressure vessel that indirectly exchanges heat between low-temperature/ high-temperature fluids with a solid wall interposed therebetween, and a shell-and-tube cylindrical heat exchanger is generally applied. The shell-and-tube cylindrical heat exchanger is widely used in ships and there is a problem in that the welding area is narrow and welding defects occur a lot due to high-level welding. In particular, in the case of a ship heat exchanger, if a problem occurs in the welding part during operation, the possibility of a safety accident is high, and repair is not easy. In this study, to solve this problem, the GTAW(Gas Tungsten Arc Welding) method was applied to secure the optimum conditions for pipe welding of STS304 material with a thickness of 5.5mm and to conduct a test. Afterwards, in accordance with the ASME rules, welding performance was verified through cross-sectional observation of welds, mechanical property tests, (tensile strength, bending strength, cryogenic impact strength) and non-destructive testing(PT, RT).
Abstract
A heat exchanger refers to a pressure vessel that indirectly exchanges heat between low-temperature/ high-temperature fluids with a solid wall interposed therebetween, and a shell-and-tube cylindrical heat exchanger is generally applied. The shell-and-tube cylindrical heat exchanger is widely used in ships and there is a problem in that the welding area is narrow and welding defects occur a lot due to high-level welding. In particular, in the case of a ship heat exchanger, if a problem occurs in the welding part during operation, the possibility of a safety accident is high, and repair is not easy. In this study, to solve this problem, the GTAW(Gas Tungsten Arc Welding) method was applied to secure the optimum conditions for pipe welding of STS304 material with a thickness of 5.5mm and to conduct a test. Afterwards, in accordance with the ASME rules, welding performance was verified through cross-sectional observation of welds, mechanical property tests, (tensile strength, bending strength, cryogenic impact strength) and non-destructive testing(PT, RT).
참고문헌 (10)
- G. Park, "A Study on the Performance Characteristics of Welded Plate Heat Exchanger for Waste Heat Recovery of Exhaust Gas for Ships", Korean Society of Equipment Engineers Summer Conference, pp.94~96 (2019)
- 이병우, "오비탈 용접법을 적용한 STS 316L 파이프 소재의 용접부 특성에 관한 연구", 동력시스템공학회지, 14(2), pp.71~77 (2010), 한국동력기계공학회
- 정창용, "오비탈 TIG 용접시스템을 이용한 시험핵연료봉 봉단마개 용접기술 개발", 한국기계기술학회지, 17(4), pp.837~844 (2015), 한국기계기술학회[DOI]
- 전애정, "STS304 콤팩트 열교환기 고상확산접합부의 접합부 변형과 인장성질에 미치는 접합온도 및 접합압력의 영향", 대한용접접합학회지, 32(4), pp.46~54 (2014), 대한용접접합학회
- S. Kim, "High-frequency Analysis of Weld Characteristic for the Heat Exchanger for Fuel cell system using Finite Element Analysis", The Spring Conference of the Korean Society of Mechanical Engineers, pp.335~336 (2012)
- D. Kim, "High temperature mechanical properties of Super304H similar weld used in USC boiler heat exchanger", The Autumn Conference of the Korean Society of Mechanical Engineers, pp.2305~2306 (2019)
- J. Kim, "Weldability of Timanium Plate for LPG Vessel by Pulsed Nd : YAG Laser", The Autumn Conference The Korean Society of Marine Engineering, pp.157~158 (2007)
- 이형근, "STS316L 강관의 수평자세 용접을 위한 GTAW 용접조건의 최적화", 대한용접접합학회지, 34(5), pp.47~52 (2015), 대한용접접합학회
- 김정현, "AISI 304 스테인리스 강으로 제작된 LNG배관 용접부의 극저온 샤르피 충격시험", 대한용접접합학회지, 32(3), pp.89~94 (2014), 대한용접접합학회
- 한민수, "오스테나이트 스테인리스강에 대한 가스텅스텐 아크용접 시 동종 및 이종 용접부의 용접성 평가", 한국마린엔지니어링학회지, 35(1), pp.68~74 (2011), 한국마린엔지니어링학회