An experimental assessment of resistance reduction and wake modification of a KVLCC model by using outer-layer vertical blades
2
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
In this study, an experimental investigation has been made of the applicability of outer-layer vertical blades to real ship model. After first devised by Hutchins and Choi (2003), the outer-layer vertical blades demonstrated its effectiveness in reducing total drag of flat plate (Park et al., 2011) with maximum drag reduction of 9.6%. With a view to assessing the effect in the flow around a ship, the arrays of outer-layer vertical blades have been installed onto the side bottom and flat bottom of a 300k KVLCC model. A series of towing tank test has been carried out to investigate resistance (CTM) reduction efficiency and improvement of stern wake distribution with varying geometric parameters of the blades array. The installation of vertical blades led to the CTM reduction of 2.15~2.76% near the service speed. The nominal wake fraction was affected marginally by the blades array and the axial velocity distribution tended to be more uniform by the blades array.
Abstract
In this study, an experimental investigation has been made of the applicability of outer-layer vertical blades to real ship model. After first devised by Hutchins and Choi (2003), the outer-layer vertical blades demonstrated its effectiveness in reducing total drag of flat plate (Park et al., 2011) with maximum drag reduction of 9.6%. With a view to assessing the effect in the flow around a ship, the arrays of outer-layer vertical blades have been installed onto the side bottom and flat bottom of a 300k KVLCC model. A series of towing tank test has been carried out to investigate resistance (CTM) reduction efficiency and improvement of stern wake distribution with varying geometric parameters of the blades array. The installation of vertical blades led to the CTM reduction of 2.15~2.76% near the service speed. The nominal wake fraction was affected marginally by the blades array and the axial velocity distribution tended to be more uniform by the blades array.
참고문헌 (11)
- Beckert, D.W., "The viscous flow on surfaces with longitudinal ribs", Journal Fluid Mechanics, 206, pp.105~129 (1989)
- Choi, K. S., "Turbulent drag reduction using compliant surfaces", Proceedings of the Royal Society of London, 453(1965), pp.2229~2240 (1997)
- Hefner, J. N., "Large-Eddy breakup scheme for turbulent viscous drag reduction", Paper of the Symposium on Viscous Drag Reduction. In: Viscous flow drag reduction; Symposium, pp.110~127 (1979)
- Hutchins, N., "An investigation of larger-scale coherent structures in fully developed turbulent boundary layers", 박사, pp.2003
- Hutchins, N., "Towards a greater understanding of turbulent skin friction reduction", Proceedings of ASME FEDSM’02 2002 ASME Fluids Engineering Division Summer Meeting, pp.1449~1454 (2002)
- Moffat, R. J., "Contributions to the theory of single-sample uncertainty analysis", Trans ASME Journal Fluids Engineering, 104, pp.250~260 (1982)
- Park, H., "Experimental investigation on the drag reducing efficiency of the outer-layer vertical blades", Journal Marine Science Technology, 16(4), pp.390~401 (2011)
- Schlichting, H., "Boundary layer theory" (2000), Springer-Verlag
- Schoppa, W., "Genesis of longitudinal vortices in near-wall turbulence", Meccanica, 33, pp.489~501 (1998)
- Walsh, M., "Drag characteristics of V-groove and transverse curvature riblets", Symposium on Viscous flow drag reduction, pp.168~184 (1980)
- White, F. M., "Viscous fluid flow" (1991), McGraw Hill