Effects of reverse waves on the hydrodynamic pressure acting on a dual porous horizontal plate
1
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
The seaward reverse wave, occurring on the submerged dual porous horizontal plate, can contribute to the reduction of the transmitted wave as it reflects the propagating wave. However, the collision between the propagating and seaward reverse waves increases the water level and acts as a weight on the horizontal plate. This study investigated the characteristics of the wave pressure created by the seaward reverse wave through the analysis of experimental data. The analysis confirmed the following results: 1) the time series of the wave pressure showed reverse phase phenomena due to the collision, and the wave pressures acted simultaneously on both upper and lower surfaces of the horizontal plate; 2) the horizontal plate became repeatedly compressed and tensile before and after the occurrence of the seaward reverse wave; and 3) the seaward reverse wave created the total wave pressure to the maximum towards the direction of gravity, primarily on the upper plate. It was also confirmed that the wave distributions showed a similar trend to the wave steepness. Such outcome of the analysis will provide basic information to the structural analysis of the horizontal plate as a wave dissipater of the steel-type breakwater (STB).
Abstract
The seaward reverse wave, occurring on the submerged dual porous horizontal plate, can contribute to the reduction of the transmitted wave as it reflects the propagating wave. However, the collision between the propagating and seaward reverse waves increases the water level and acts as a weight on the horizontal plate. This study investigated the characteristics of the wave pressure created by the seaward reverse wave through the analysis of experimental data. The analysis confirmed the following results: 1) the time series of the wave pressure showed reverse phase phenomena due to the collision, and the wave pressures acted simultaneously on both upper and lower surfaces of the horizontal plate; 2) the horizontal plate became repeatedly compressed and tensile before and after the occurrence of the seaward reverse wave; and 3) the seaward reverse wave created the total wave pressure to the maximum towards the direction of gravity, primarily on the upper plate. It was also confirmed that the wave distributions showed a similar trend to the wave steepness. Such outcome of the analysis will provide basic information to the structural analysis of the horizontal plate as a wave dissipater of the steel-type breakwater (STB).
참고문헌 (15)
- Cho, I.H., "Interactions of a horizontal flexible membrane with oblique waves", Journal of Fluid Mechanics, 367(1), pp.138~161 (1998)
- 조일형, "수평형 타공판의 소파특성", 한국해안·해양공학회논문집, 14(4), pp.265~273 (2002), 한국해안,해양공학회
- Graw, K. U., "The Submerged plate as a wave filter-stability of the pulsating flow phenomenon", Proceedings 23rd Conference Coastal Engineering, 4(9), pp.1153~1160 (1992)
- Graw, K. U., "The submerged plate as primary wave breaker", Proceedings 25th International IAHR Congress, 25(4), pp.167~173 (1993)
- Hiroi, I., "On a method of estimating the force of waves", Memoirs of Engineering Facility, Imperial University of Tokyo, 10(1), pp.19~ (1919)
- Isaacson, M., "Wave interactions with vertical slotted barrier", Journal of waterway, Port, coastal and Ocean Engineering, 124(3), pp.118~126 (1998)
- Kee, S. T., "Blockage effects and wave energy dissipation by submerged porous plates", Proceedings of the Sixteenth International Offshore and Polar Engineering Conference, 1(6), pp.2546~2554 (2007)
- The next generation securing technology for the coastal space, "Kweon, H. M.", KICTEP, ~, pp.Research proposal (B04-01) (2005)
- 권혁민, "水平型 二列 組合板의 透過率 算定을 위한 實驗的 硏究", 대한토목학회 논문집B, 28(4), pp.421~428 (2008), 대한토목학회
- 권혁민, "철재형 이안제 설계기법 연구 I . 설계 및 파압추정 단계", 한국방재학회논문집, 11(3), pp.209~218 (2011), 한국방재학회
- 권혁민, "철재형 이안제의 설계외력 산정기법 검증을 위한 실해역 시험", 한국방재학회논문집, 12(1), pp.205~215 (2012), 한국방재학회
- 권혁민, "Experimental study on the method of estimating the vertical design wave force acting on a submerged dual horizontal plate", International Journal of Naval Architecture and Ocean Engineering, 5(4), pp.569~579 (2013), 대한조선학회
- 권오균, "철재형 이안제 설계기법 연구 II. 하부기초 설계 단계", 한국방재학회논문집, 11(3), pp.219~228 (2011), 한국방재학회
- 이정렬, "철재형 이안제 설계기법 연구 III. 투과성 철재형 이안제 후면에서의 해저면 변화", 한국방재학회논문집, 11(6), pp.301~308 (2011), 한국방재학회
- Tuck, E. O., "Matching problem involving flow through small holes", Advances in Applied Mechanics, 15, pp.89~158 (1975)