Model test of an inverted conical cylinder floating offshore wind turbine moored by a spring-tensioned-leg
2
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
A new 5-MW floating offshore wind turbine moored by a spring-tensioned-leg was proposed for installa¬tion in about 50m water depth. Its substructure is a platform of the inverted conical cylinder type with massive ballast weight plate at the bottom. A 1:128 scale model was built for the preliminary engineering development. The model tests in waves and wind were carried out to estimate motion characteristics of this platform in the Ocean Engineering Wide Tank of the University of Ulsan. Its motions were measured and the RAOs were compared. The proposed floating off¬shore wind turbine showed a good stability and decent responses in waves, wind and operation of the wind turbine.
Abstract
A new 5-MW floating offshore wind turbine moored by a spring-tensioned-leg was proposed for installa¬tion in about 50m water depth. Its substructure is a platform of the inverted conical cylinder type with massive ballast weight plate at the bottom. A 1:128 scale model was built for the preliminary engineering development. The model tests in waves and wind were carried out to estimate motion characteristics of this platform in the Ocean Engineering Wide Tank of the University of Ulsan. Its motions were measured and the RAOs were compared. The proposed floating off¬shore wind turbine showed a good stability and decent responses in waves, wind and operation of the wind turbine.
참고문헌 (16)
- Study to Feasibility of and Boundary Conditions for Floating Offshore Wind Turbines, "Bulder, B.", ECN, MARIN, TNO, TUD, MSC, Lagerway the Windmaster, ~ (2002)
- Jensen, J. J., "Extreme wave and wind response predictions", Ocean Engineering, 38, pp.2244~2253 (2011)
- "Definition of the floating system for phase IV of OC3" (2010)[URL]
- "Definition of a 5-MW reference wind turbine for offshore system development" (2009)[URL]
- Kim, K. M., "Experimental and numerical study on analysis of motion of floating offshore wind turbine", 석사, pp.2011
- Lee, K. H., "Responses of floating wind turbines to wind and wave excitation", 석사, pp.2005
- Martin, H. M., "Development of a scale model wind turbine for testing of offshore floating wind turbine systems", 석사, pp.2011
- Roddier, D., "WindFloat: A floating foundation for offshore wind turbines", Journal of Renewable and Sustainable Energy, 2, pp.033104~ (2010)
- Sclavounos, P. D., "Floating offshore wind turbines: responses in a seastate pareto optimal designs and economic assessment", International Conference on Offshore Mechanics & Arctic Engineering, 6, pp.31~41 (2007)
- Shin, H., "Model test of the OC3-Hywind floating offshore wind turbine", Proceedings.of 21st ISOPE, pp.361~ (2011)
- Skaare, B., "Integrated dynamic analysis of floating offshore wind turbines", European Wind Energy Conference (2007)
- Wang, L., "Simulation of large-amplitude Motion of Floating Wind Turbines Using Conservation of Momentum", Ocean engineering, 42, pp.155~164 (2012)
- Wayman, E., "Coupled dynamic modeling of floating wind turbine systems", Offshore Technology Conference (2006)
- Wayman, E., "Coupled dynamics and economic analysis of floating wind turbine systems", 석사, pp.2006
- "Beatrice wind farm" (2012)[URL]
- "Windsea concept" (2012)[URL]