Economic Feasibility Analysis According to Seam Location of Ship Pieces
1
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
The structure of a ship is completed by processing various steel plates and welding these plates. This butt welding of plates is defined as a seam in shipyards, and this study seeks to find a way to decrease costs by reducing the utilization of steel through effective seam arrangement. Seams were defined and classified according to purpose, and examples of “pieces” and “main plates” where seam creation had an economical saving effect were selected. For “pieces,” the change in the weight of steel utilized depending on the presence or absence of a seam was calculated, and the resulting change in cost increase was presented. In the case of the “main plate,” the quantity of seams does not change, but an example of cost variation due to the appropriate placement of seams is presented. Hence, a large difference was found in the costs of “pieces” depending on seam location. Thus, it was advantageous to create additional seams. For the “main plate,” it was found that narrow-width and wide-width materials incur more costs. This study demonstrates that creating seams is economically advantageous but may not be preferred owing to the increased workload from a production perspective.
Abstract
The structure of a ship is completed by processing various steel plates and welding these plates. This butt welding of plates is defined as a seam in shipyards, and this study seeks to find a way to decrease costs by reducing the utilization of steel through effective seam arrangement. Seams were defined and classified according to purpose, and examples of “pieces” and “main plates” where seam creation had an economical saving effect were selected. For “pieces,” the change in the weight of steel utilized depending on the presence or absence of a seam was calculated, and the resulting change in cost increase was presented. In the case of the “main plate,” the quantity of seams does not change, but an example of cost variation due to the appropriate placement of seams is presented. Hence, a large difference was found in the costs of “pieces” depending on seam location. Thus, it was advantageous to create additional seams. For the “main plate,” it was found that narrow-width and wide-width materials incur more costs. This study demonstrates that creating seams is economically advantageous but may not be preferred owing to the increased workload from a production perspective.
참고문헌 (21)
- "Plate nesting"[URL]
- "Market wages in the construction industry in 2023. The comprehensive market price information" (2023)[URL]
- "E-NEST"[URL]
- Do, H. S., "Economic review on seam creation of pieces considering steel price", Proceedings of the Korean Society of Ocean Engineers 2022 Fall Conference, pp.506~510 (2022)
- Do, H. S., "A study on optimal placement of internal seams considering economics", Proceedings of the Korean Association of Ocean Science and Technology Societies 2023Spring Conference (2023)
- "What is Dr.Nesting?"[URL]
- Elkeran, A., "A new approach for sheet nesting problem using guided cuckoo search and pairwise clustering", European Journal of Operational Research, 231(3), pp.757~769 (2013)[DOI]
- Kim, Y. T., "An introduction to the optimization method for weld seam positions using SA", Proceedings of the Korean Institute of Information and Commucation Sciences Conference, pp.540~543 (2013)
- "Steel production cuts around the world … Steel prices soar" (2022)[URL]
- 이철수, "선박용 플랫바의 효율적인 NC 절단 경로를 고려한 배치방법에 관한 연구", 한국CDE학회 논문집, 9(2), pp.102~111 (2004), 한국CDE학회
- Lee, C. S., "A study of the efficient nesting considering scrap feature", Proceedings of the Society of CAD, 2011, 533~537
- 이혜빈, "수치 실험을 통한 조선 강판 전용 Nesting Algorithm의 적합도 함수의 결정", 한국해양공학회지, 27(5), pp.28~35 (2013), 한국해양공학회
- "Shipbuilding industry, It's a problem to win orders without cost reduction" (2018)[URL]
- 나건열, "조선 네스팅 문제의 부재 페어링을 위한 딥러닝 기반 부재 분류 방법", 한국CDE학회 논문집, 26(4), pp.514~524 (2021), 한국CDE학회
- Park, J. W., "A study on the nesting S", W development of piece with PC-CADRA, 1997, pp.11(4), 239~248
- Park, J. W., "A study on the piece creation on hull-structure with PC-CADRA", Journal of Ocean Engineering and Technology, 11(3), pp.191~199 (1997)
- Park, M. K., "Construction of an automation system for hull part nesting and cutting", Journal of the Industrial Technology Research Institute, 17 (1999), Korea Maritime University[DOI]
- 유병항, "유전 알고리즘과 No Fit Polygon법을 이용한 임의 형상 부재 최적배치 연구", 한국해양공학회지, 18(2), pp.77~82 (2004), 한국해양공학회
- 류갑상, "웹 기반의 네스팅 통합시스템 설계와 구현", 정보과학회논문지 : 시스템 및 이론, 33(1), pp.44~51 (2006), 한국정보과학회
- 신동목, "휴리스틱 탐색 기법을 이용한 네스팅 전문가 시스템", 한국해양공학회지, 26(4), pp.8~14 (2012), 한국해양공학회[DOI]
- Shim, J. H., "Feature extract and auto nesting algorithms for cutting efficiency of ship building part", Proceedings of the Society of CAD, 2009, 383~389