Ship block assembly sequence planning considering productivity and welding deformation
2
조회
0
다운로드
2
인용
0
참고문헌
키워드
초록
The determination of assembly sequence in general mechanical assemblies plays an important role in terms of manufacturing cost, duration and quality. In the production of ships and offshore plants, the consideration of productivity factors and welding deformation is crucial in determining the optimal assembly sequence. In shipbuilding and offshore industries, most assembly sequence planning has been done according to engineers' decisions based on extensive experience. This may result in error-prone planning and sub-optimal sequence, especially when dealing with unfamiliar block assemblies composed of dozens of parts. This paper presents an assembly sequence planning method for block assemblies. The proposed method basically considers geometric characteristics of blocks to determine feasible assembly sequences, as well as assembly process and productivity factors. Then the assembly sequence with minimal welding deformation is selected based on simplified welding distortion analysis. The method is validated using an asymmetric assembly model and the results indicate that it is capable of generating an optimal assembly sequence.
Abstract
The determination of assembly sequence in general mechanical assemblies plays an important role in terms of manufacturing cost, duration and quality. In the production of ships and offshore plants, the consideration of productivity factors and welding deformation is crucial in determining the optimal assembly sequence. In shipbuilding and offshore industries, most assembly sequence planning has been done according to engineers' decisions based on extensive experience. This may result in error-prone planning and sub-optimal sequence, especially when dealing with unfamiliar block assemblies composed of dozens of parts. This paper presents an assembly sequence planning method for block assemblies. The proposed method basically considers geometric characteristics of blocks to determine feasible assembly sequences, as well as assembly process and productivity factors. Then the assembly sequence with minimal welding deformation is selected based on simplified welding distortion analysis. The method is validated using an asymmetric assembly model and the results indicate that it is capable of generating an optimal assembly sequence.
참고문헌 (19)
- Bourjault, A., "Contributionune approche methodologique del'assemblage automatise: elaboration automatique dessequences operatiores", pp.1984
- Chen, W.C., "A three-stage integrated approach for assembly sequence planning using neural networks", Expert Syst. Appl., 32(1), pp.245~253 (2008)
- Cheng, R., "A tutorial survey of job-shop scheduling problems using genetic algorithms-I. Represent", Comput. Ind. Engng, 30(4), pp.983~997 (1996)[DOI]
- Defazio, T.L., "Simplified generation of all mechanical assembly sequences", IEEE J. Robot. Autom., RA-3(3), pp.640~658 (1987)
- 하윤석, "대형 용접구조물의 탄소성 열변형 해석을 위한 용접부의 변형률 경계조건에 관한 연구", 대한용접접합학회지, 29(4), pp.410~415 (2011), 대한용접접합학회
- 하윤석, "용접구조물의 변형 최소화를 위한 최적 용접순서의 해석적 방법", 대한용접접합학회지, 31(3), pp.54~59 (2013), 대한용접접합학회
- Hardikar, K.D., "Techniques to ensure minimum distortion of an assembly of metal parts induced due to the process of welding used for an assembly", IJSER, 3(2), pp.1~4 (2012)
- Kim, H., "Scheduling of shipyard block assembly process using constraint satisfaction problem", Asia Pac. Mgmt. Rev., 7(1), pp.119~138 (2000)
- 김재웅, "A study on an efficient prediction of welding deformation for T-joint laser welding of sandwich panel Part II : Proposal of a method to use shell element model", International Journal of Naval Architecture and Ocean Engineering, 6(2), pp.245~256 (2014), 대한조선학회
- 김태준, "Welding deformation analysis based on improved equivalent strain method considering the effect of temperature gradients", International Journal of Naval Architecture and Ocean Engineering, 7(1), pp.157~173 (2015), 대한조선학회
- 김민규, "Simplified welding distortion analysis for fillet welding using composite shell elements", International Journal of Naval Architecture and Ocean Engineering, 7(3), pp.452~465 (2015), 대한조선학회
- 김태준, "Welding deformation analysis based on improved equivalent strain method to cover external constraint during cooling stage", International Journal of Naval Architecture and Ocean Engineering, 7(5), pp.805~816 (2015), 대한조선학회
- Mula, J., "Models for production planning under uncertainty: a review", Int. J. Prod. Econ., 103, pp.271~285 (2006)[DOI]
- 박태원, "용접 순서의 변화에 따른 자동차용 Frame의 변형과 잔류 응력 분석", 한국자동차공학회 논문집, 21(3), pp.50~57 (2013), 한국자동차공학회[DOI]
- Shipeng, Q., "An integrated method for block assembly sequence planning in shipbuilding", Int. J. Adv. Manuf. Tech., 69, pp.1123~1135 (2013)[DOI]
- Su, Q., "Applying case-based reasoning in assembly sequence planning", Int. J. Prod. Res., 45, pp.29~47 (2014)
- Wang, J., "Reduction of welding distortion for an improved assembly process for hatch coaming production", pp.737~744 (2013)
- Yasin, A., "Product assembly sequence optimization based on genetic algorithm", Int. J. Comput. Sce. Eng. Commun., 02(09), pp.3065~3070 (2010)
- Zhang, Y.Z., "Automated sequencing and sub-assembly detection in automobile body assembly planning", J. Mater. Process. Technol., 129(1-3), pp.490~494 (2002)[DOI]