Door Opening부의 보강재 형상변화에 따른 용접 변형 특성
Welding Distortion Characteristics of Door Openings According to Changing Shape of Stiffener
2
조회
0
다운로드
4
인용
0
참고문헌
키워드
초록
Welding often results in welding distortion during the assembly process. The welding distortion of thin-plate structures such as the living quarters of ships and offshore installations is a more significant problem than in the case of thick-plate structures. Pre-stressing/heating and fairing, which are additional works to mitigate and control welding distortion, are inevitable, and the construction planning is accordingly delayed. In order to prevent welding distortion and minimize the additional work during the assembly process, increasing the plate thickness and/or the number of stiffeners may be a simple solution, but it may give rise to problems related to cost and weight. In this study, the welding distortion control effect of the type of stiffeners on the door openings of various living quarter structures was investigated using an experimental method and a finite element method. The results showed the feasibility of mitigating and controlling the welding distortion, and the optimum selection of the type of stiffeners was confirmed.
Abstract
Welding often results in welding distortion during the assembly process. The welding distortion of thin-plate structures such as the living quarters of ships and offshore installations is a more significant problem than in the case of thick-plate structures. Pre-stressing/heating and fairing, which are additional works to mitigate and control welding distortion, are inevitable, and the construction planning is accordingly delayed. In order to prevent welding distortion and minimize the additional work during the assembly process, increasing the plate thickness and/or the number of stiffeners may be a simple solution, but it may give rise to problems related to cost and weight. In this study, the welding distortion control effect of the type of stiffeners on the door openings of various living quarter structures was investigated using an experimental method and a finite element method. The results showed the feasibility of mitigating and controlling the welding distortion, and the optimum selection of the type of stiffeners was confirmed.
참고문헌 (15)
- Material Testing and Residual Stress Measurements in a Stiffened Steel Plate, "Cheng, J. J. R.", Ship Sturucture Committee, ~, pp.Strength and Stability of Stiffened Plate Components, SSC-339 (1996)
- Ha, Y. S., "Development of Welding Distortion Analysis Method Using Residual Strain As Boundary Condition", Materials Science Forum, Trans Tech Publications, 580, pp.649~654 (2008)[DOI]
- 하윤석, "대형 용접구조물의 탄소성 열변형 해석을 위한 용접부의 변형률 경계조건에 관한 연구", 대한용접접합학회지, 29(4), pp.410~415 (2011), 대한용접접합학회
- 하윤석, "초대형 구조모델을 활용한 쉘구조물의 용접변형 해석", 대한용접접합학회지, 33(3), pp.62~67 (2015), 대한용접접합학회
- 허주호, "박판 평 블록 구조의 용접변형 제어법 개발(I)", 대한용접접합학회지, 21(4), pp.75~79 (2003), 대한용접접합학회
- 홍성빈, "온도분포 해석 해와 유한요소법을 이용한 대형 강판의 용접변형 해석", 대한용접접합학회지, 32(4), pp.69~74 (2014), 대한용접접합학회
- 김하근, "선루 제작시 데크의 전 변형 제어에 관한 연구", 대한용접접합학회지, 28(5), pp.64~68 (2010), 대한용접접합학회
- Lee D. J., "A Study on the Prediction of Shrinkage During the Manufacturing of a Deckhouse of RIG", International Offshore and Polar Engineering Conference, pp.166~171 (2003)
- Marc 2013 User's Guide. DOC10336, "MSC MARC", MSC Software Corporation, ~ (2013)
- Paik, J. K., "Ultimate Limit State Analysis and Design of Plated Structures" (2018), John Wiley & Sons
- Seo, J. K., "Welding Distortion Design Formulae of Thin-plate Panel Structure during the Assembly Process", Ships and Offshore Structures, 13(S1), pp.364~377 (2018)[DOI]
- Shin, S. B., "A Study on Control of Buckling Distortion at the Thin Panel during Welding", Proceedings of International Offshore and Polar Engineering Conference, pp.236~242 (2006)
- Taguchi Methods, Orthogonal Arrays and Linear Graphs: Tools for Quality Engineering, "Taguchi, G.", American Supplier Institute, 35~38 (1987)
- 양영수, "X형 개선을 가진 후판 맞대기 용접에 있어서 유한요소법을 이용한 각변형 해석", 한국기계가공학회지, 17(4), pp.169~177 (2018), 한국기계가공학회[DOI]
- Yi. M. S., "An Empirical Formulation for Predicting Welding-induced Biaxial Compressive Residual Stresses on Steel Stiffened Plate Structures and Its Application to Thermal Plate Buckling Prevention", Ships and Offshore Structures (2018)[DOI]