펄스전류활성소결장치를 이용한 다공성 Fe-Cu-C계 합금 제조 및 기계적 특성 평가
Mechanical Properties and Fabrication of Porous Fe-Cu-C Alloy by Pulsed Current Activated Sintering
1
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
Porous Fe-Cu-C alloy was sintered by Pulsed Current Activated Sintering(PCAS) method within 10 min from horizontal ball mill mixture. The relative density of Fe-20wt.%Cu-0.8wt.%C alloy fabricated by PCAS method was 91%. The average hardness of the Fe-20wt.%Cu-0.8wt.%C alloy was HRB 92. The phase analysis, microstructure and composition information of the sintered alloy were investigated by using XRD, FESEM, EDAX.
Abstract
Porous Fe-Cu-C alloy was sintered by Pulsed Current Activated Sintering(PCAS) method within 10 min from horizontal ball mill mixture. The relative density of Fe-20wt.%Cu-0.8wt.%C alloy fabricated by PCAS method was 91%. The average hardness of the Fe-20wt.%Cu-0.8wt.%C alloy was HRB 92. The phase analysis, microstructure and composition information of the sintered alloy were investigated by using XRD, FESEM, EDAX.
참고문헌 (9)
- Victor Mironov, "Composite Details from Fe-Cu Powder Materials", 15(1), pp.44~47 (2019)
- 권일현, "첨가제 및 소결조건에 따른 무급유 베어링 강판 기공성 평가", 한국기계기술학회지, 20(3), pp.383~388 (2018), 한국기계기술학회[DOI]
- B. J. Park, "Metallic porous materials’ design with phase separation in Fe-Cu and Co-Cu systems", Intermetallics, 17(11), pp.958~961 (2009)
- F. Wakai, "Methods to calculate sintering stress of porous materials in equilibrium", Acta materialia, 52(19), pp.5621~5631 (2004)
- Edmond Ilia, "Copper precipitation at engine operating temperatures in powder-forged connecting rods manufactured with Fe-Cu-C alloys", Materials Science & Engineering A, 767(8), pp.138383~138392 (2019)
- Xiaoyang Wang, "Effect of Lubricating Phase on Microstructure and Properties of Cu–Fe Friction Materials", Materials, 12(2), pp.313~327 (2019)
- Fabrice Bernier, "Copper Strengthening of PM steel parts", Advances in Powder Metallurgy & Particulate Materials, 47(6), pp.11~19 (2011)
- S. K. Hjua, "Influence of tempering on the microstructure and mechanical properties of HSLA-100 steel plates", Metallurgical and Materials Transactions A, 32, pp.2259~2270 (2001)
- Na-Ra Park, "High-Frequency Induction Heated Synthesis and Consolidation of Nanostructured Al–TaC Composite and Its Mechanical Properties", Journal of Nanoscience and Nanotechnology, 19(4), pp.2354~2357 (2019)