Spark Plasma Sintering of Fe-Ni-Cu-Mo-C Low Alloy Steel Powder
0
조회
0
다운로드
2
인용
0
참고문헌
키워드
초록
In this study, Fe-Cu-Ni-Mo-C low alloy steel powder is consolidated by spark plasma sintering (SPS) process. The internal structure and the surface fracture behavior are studied using field-emission scanning electron microscopy and optical microscopy techniques. The bulk samples are polished and etched in order to observe the internal structure. The sample sintered at 900oC with holding time of 10 minutes achieves nearly full density of 98.9% while the density of the as-received conventionally sintered product is 90.3%. The fracture microstructures indicate that the sample prepared at 900oC by the SPS process is hard to break out because of the presence of both grain boundaries and internal particle fractures. Moreover, the lamellar pearlite structure is also observed in this sample. The samples sintered at 1000 and 1100oC exhibit a large number of tiny particles and pores due to the melting of Cu and aggregation of the alloy elements during the SPS process. The highest hardness value of 296.52 HV is observed for the sample sintered at 900oC with holding time of 10 minutes.
Abstract
In this study, Fe-Cu-Ni-Mo-C low alloy steel powder is consolidated by spark plasma sintering (SPS) process. The internal structure and the surface fracture behavior are studied using field-emission scanning electron microscopy and optical microscopy techniques. The bulk samples are polished and etched in order to observe the internal structure. The sample sintered at 900oC with holding time of 10 minutes achieves nearly full density of 98.9% while the density of the as-received conventionally sintered product is 90.3%. The fracture microstructures indicate that the sample prepared at 900oC by the SPS process is hard to break out because of the presence of both grain boundaries and internal particle fractures. Moreover, the lamellar pearlite structure is also observed in this sample. The samples sintered at 1000 and 1100oC exhibit a large number of tiny particles and pores due to the melting of Cu and aggregation of the alloy elements during the SPS process. The highest hardness value of 296.52 HV is observed for the sample sintered at 900oC with holding time of 10 minutes.
참고문헌 (18)
- I. Chang, "Advances in Powder Metallurgy:Properties, Processing and Applications" (2013), Woodhead Publishing
- R. Yilmaz, , Journal of Achievements in Materials and Manufacturing Engineering, 31, pp.23~ (2008)
- H. Khorsand, , Mater. Des., 23, pp.667~ (2002)
- Y. H. Lu, , Mater. Des., 55, pp.758~ (2004)
- B. López, , Mater. Charact., 28, pp.49~ (1992)
- G. Navarro, , Powder Metall., 56, pp.11~ (2013)
- R. J. Causton, , Adv. Powder. Metall. Part. Mater., 5, pp.17~ (1992)
- M. D. Charre, "Microstructure of Steels and Cast Irons", pp.284~ (2003), Springer
- M. Tokita, , Materials Science Forum, 308, pp.83~ (1999)
- R. Chaim, , Mater. Sci. Eng. A, 443, pp.25~ (2007)
- N. Saheb, , J. Nanomater., 2012, pp.1~ (2012)
- M. Schwertz, , Powder Metall., 58, pp.87~ (2015)
- M. Suaìrez, "Sintering Applications", pp.319~ (2013), InTech
- Z. A. Munir, , J. Mater. Sci., 41, pp.763~ (2006)
- F. Zhang, , Mater. Today, 16, pp.192~ (2013)
- S. N. Bagchi, "Industrial Steel Reference Book" (1986), New Age International
- M. Tokia, , J. Soc. Powder Technol. Japan, 30, pp.790~ (1993)
- E. Oberg, "Machinery's Handbook" (2012), Industrial Press