Groove 단면형상에 따른 유압 Spool Valve의 윤활해석
Lubrication Analysis of Hydraulic Spool Valve with Groove Cross Sectional Shapes
1
조회
0
다운로드
8
인용
0
참고문헌
키워드
초록
The spools in most hydraulic spool type control valve have several circumferential grooves to prevent well known hydraulic locking problems which result in high friction force and excessive wear. In this paper, a commercial computational fluid dynamics (CFD) code, FLUENT is used to investigate the flow and lubrication characteristics of grooved hydraulic spool valve. The stream lines and pressure distributions are obtained for various groove cross sectional shapes and film thicknesses. The stream lines are highly affected by groove cross sectional shape but pressure distributions mainly depend on the film shape and its magnitude. Therefore the numerical method adopted in this paper and results can be use in designing of various grooved spool valve.
Abstract
The spools in most hydraulic spool type control valve have several circumferential grooves to prevent well known hydraulic locking problems which result in high friction force and excessive wear. In this paper, a commercial computational fluid dynamics (CFD) code, FLUENT is used to investigate the flow and lubrication characteristics of grooved hydraulic spool valve. The stream lines and pressure distributions are obtained for various groove cross sectional shapes and film thicknesses. The stream lines are highly affected by groove cross sectional shape but pressure distributions mainly depend on the film shape and its magnitude. Therefore the numerical method adopted in this paper and results can be use in designing of various grooved spool valve.
참고문헌 (15)
- Meritt, H. E, "Hydraulic Control Systems" (1967), John Wiley & Sons
- Sweeney, D. C., "Preliminary Investigation of Hydraulic Lock", Engineering, 172, pp.513~516 (1951)
- Mannam, J, "Further Aspects of Hydraulic Lock", Proc. of Instn. Mech. Engrs, 통권 : 173, pp.699~716 (1959)
- Sweeney, D. C, "Eight Ways to Overcome Hydraulic Lock", Engineering, 190, pp.592~593 (1960)
- Hessey, M. F, "Hydraulic Lock Forces on Tapered Pistons", Proc. Instn. Mech. Engrs, 통권 : 184, pp.983~992 (1969)
- Lee, C. O, "Querkräfte an hydraulischen Ventilen mit mehreren Umfangsnuten", Ölhydraulik und Pneumatik, 34, pp.269~274 (1990)
- Sasaki, A, "Review of Studies of Hydraulic Lock", Lubrication Engineering, 49, pp.585~593 (1993)
- Borghi, M, "Hydraulic Locking-in Spool-Type Valves :Tapered Clearances Analysis", Proc. of Instn. Mech. Engrs., J. of Systems and Control Eng, 통권 : 215, pp.157~168 (2001)
- Milani, M, "Designing Hydraulic Locking Balancing Grooves", Proc. of Instn. Mech. Engrs., J. of Systems and Control Eng, 215, pp.453~465 (2001)
- 박태조, "압력에 따른 점도변화가 그루브를 한 유압 스푸울 밸브에 미치는 영향", 한국윤활학회지, 22(6), pp.307~313 (2006)
- FLUENT, "FLUENT 6.0 Manual", ~ (2002)
- Moffatt, H. K., "Viscous and Resistive Eddies near a Sharp Corner", J. Fluid Mech, 18, pp.1~18 (1964)
- Shankar, P. N, "Fluid Mechanics in the Driven Cavity", Annual Review of Fluid Mechanics, 32, pp.93~136 (2000)
- Cheng, M, "Vortex Structure of Steady Flow in a Rectangular Cavity", Computers and Fluids, 35(10), pp.1046~1062 (2006)
- 박태조, "유압 Spool Valve의 Groove내에서의 유동해석", 유공압시스템학회 추계 학술대회논문집, pp.83~93 (2007)