사판식 유압 피스톤 펌프용 Slipper Bearing내의 유동해석
Flow Analysis in a Slipper Bearing for Swash Plate Type Axial Piston Pump
0
조회
0
다운로드
6
인용
0
참고문헌
키워드
초록
In this paper, a CFD (Computational fluid dynamics) code, FLUENT is adopted to investigate accurate flow characteristics for a slipper bearing which is used swash plate type hydraulic axial piston pump. Static pressure and velocity distributions, and velocity vectors are plotted for different film thickness and slipper rotational velocity. In recess region, there exists a doughnut shaped vortex ring. The static pressure distributions are non-uniform and the flow fields are highly asymmetrical under bearing rotation. Therefore the numerical method adopted in this paper can be use in design of hydrostatic components and further studies are required.
Abstract
In this paper, a CFD (Computational fluid dynamics) code, FLUENT is adopted to investigate accurate flow characteristics for a slipper bearing which is used swash plate type hydraulic axial piston pump. Static pressure and velocity distributions, and velocity vectors are plotted for different film thickness and slipper rotational velocity. In recess region, there exists a doughnut shaped vortex ring. The static pressure distributions are non-uniform and the flow fields are highly asymmetrical under bearing rotation. Therefore the numerical method adopted in this paper can be use in design of hydrostatic components and further studies are required.
참고문헌 (10)
- Koc,E., "Investigation into the Effects of Orifice Size,Offset and Overclamp Ratio on the Lubrication of Slipper Bearing", Tribology Int, 29, pp.299~305 (1996)
- Koc,E., "Considerations in the Design of Partially Hydrostatic Slipper Bearings", Tribology Int, 30, pp.815~823 (1997)
- Dzodzo,M., "Pressure and Flow Characteristics in a Shallow Hydrostatic Pocket with Rounded Pocket", Land Joints, 1999, 69~76
- Manring,N.D., "Experimental Studies on the Performance of Slipper Bearings Within Axial-Piston Pumps", Trans.ASMEJ.of Tribology, 126, pp.511~518 (2004)
- Huanlong,L., "Research on the Lubrication Characteristics of Water Hydraulic Slipper Friction Pairs", Proc.IMechE,J.of Engineering Tribology, pp.1559~1567 (2006)
- Chen,X.D., "The Effect of the Recess Shape on Performance Analysis of the Gas-Lubricated Bearing in Optical Lithography", Tribology Int, 39, pp.1336~1341 (2006)
- Brajdic-Mitidieri,P., "CFD Analysis of a Low Friction Pocketed Pad Bearing", Trans.ASMEJ.of Tribology, 127, pp.803~812 (2005)
- FLUENT, "FLUENT 6.0 Manual", ~ (2002)
- 박태조, "유압 피스톤 펌프의 피스톤과 실 린더 사이의 윤활해석,제1보:피스톤 형상에 의한 영향", 한국윤활학회지, 14(1), pp.64~69 (1998)
- 박태조, "유압 피스톤 펌프의 피스톤과 실린더 사이 의 윤활해석,제2보:피스톤 왕복운동의 영향", 한 국윤활학회지, 17(6), pp.435~440 (2001)