스파이럴 그루브가 가공된 스풀밸브의 윤활 특성 연구
A Study on the Lubrication Characteristics of Spool Valve with Spiral Groove
0
조회
0
다운로드
2
인용
0
참고문헌
키워드
초록
In this research, spool valves with spiral grooves are suggested and their lubrication characteristics are investigated by numerical analysis. The three-dimensional flow field is obtained by solving the Navier-Stokes equations in dimensionless form, so that the performance variables such as lateral force, friction force and volume flow rate are determined. Also, the lubrication characteristics of spool valves with spiral grooves are compared with those with typical grooves under variable working conditions. It is shown that spool valves with spiral grooves can get better performance in aspect of mitigation of uneven pressure distribution surrounding spool. Moreover, it is found that the minimum distance between spool edges and grooves, the type of spiral groove, and the groove angle have noticeable effect on the lubrication characteristics.
Abstract
In this research, spool valves with spiral grooves are suggested and their lubrication characteristics are investigated by numerical analysis. The three-dimensional flow field is obtained by solving the Navier-Stokes equations in dimensionless form, so that the performance variables such as lateral force, friction force and volume flow rate are determined. Also, the lubrication characteristics of spool valves with spiral grooves are compared with those with typical grooves under variable working conditions. It is shown that spool valves with spiral grooves can get better performance in aspect of mitigation of uneven pressure distribution surrounding spool. Moreover, it is found that the minimum distance between spool edges and grooves, the type of spiral groove, and the groove angle have noticeable effect on the lubrication characteristics.
참고문헌 (7)
- Sweeny, D. C., "Preliminary Investigation on Hydraulic Lock", Engineering, 172, pp.203~205 (1951)
- Manhajm, J., "An Investigation of Hydraulic Lock", Proc. Inst. Mech. Eng., 169, pp.865~879 (1955)
- Blackburn, J. F., "Contributions to Hydraulic Control;5, Lateral Forces of Hydraulic Pistons", TribologyTransactions, 75, pp.1175~1180 (1953)
- Borghi, M., "Hydraulic Locking-in Spool-Type Valves: Tapered Clearances Analysis", Proc Instn Mech Engrs, 215, pp.157~168 (2001)
- Milani, M., "Designing Hydraulic Locking Balancing Grooves", Proc Instn Mech Engrs, 215, pp.453~465 (2001)
- Sasaki, A., "A Review of Studies of Hydraulic Lock", Lubrication Engineering, 49, pp.585~593 (1993)
- Brajdic-Mitidieri, P., "CFD Analysis of a Low Friction Pocketed Pad Bearing", Journal of Tribology, 127, pp.803~811 (2005)