캐비테이션을 고려한 스풀밸브 해석에서 Navier-Stokes 방정식과 Reynolds 방정식에 의한 비교 연구
Comparative Study of the Navier-Stokes Equation & the Reynolds Equation in Spool Valve Analysis Considering Cavitation
0
조회
0
다운로드
4
인용
0
참고문헌
키워드
초록
The Reynolds equation is commonly used to investigate the lubrication characteristics of a spool valve. However, the applicability of the Reynolds equation is questionable for analyzing a spool valve because cavitation often occurs in the grooves of the valve and the depth of a groove is much higher than the clearance in most cases. In this study, the validity of the Reynolds equation in the spool valve analysis is investigated by comparing the results obtained from the Reynolds equation and those obtained from the Navier-Stokes equation. The results are compared in terms of the lateral forces, friction forces, and volume flow rates (leakages). A significant difference of more than 20% is found in the lateral forces in cases where cavitation occurs and there are many grooves. Therefore, the Navier-Stokes equation should be used to investigate the lubrication characteristics of a spool valve when cavitation occurs and when the spool valve contains many grooves.
Abstract
The Reynolds equation is commonly used to investigate the lubrication characteristics of a spool valve. However, the applicability of the Reynolds equation is questionable for analyzing a spool valve because cavitation often occurs in the grooves of the valve and the depth of a groove is much higher than the clearance in most cases. In this study, the validity of the Reynolds equation in the spool valve analysis is investigated by comparing the results obtained from the Reynolds equation and those obtained from the Navier-Stokes equation. The results are compared in terms of the lateral forces, friction forces, and volume flow rates (leakages). A significant difference of more than 20% is found in the lateral forces in cases where cavitation occurs and there are many grooves. Therefore, the Navier-Stokes equation should be used to investigate the lubrication characteristics of a spool valve when cavitation occurs and when the spool valve contains many grooves.
참고문헌 (11)
- Sasaki, A., "A Review of Studies of Hydraulic Lock", Lubrication Engineering, 49, pp.585~593 (1993)
- Tichy, J. A, "Plain Slider Bearing Load Due to Fluid Inertia-Experiment and Theory", ASME Journal of Tribology, 107, pp.32~38 (1985)
- Arghir, M., "Theoretical Analysis of the Incompressible Laminar Flow in Macro-Roughness Cell", ASME Journal of Tribology, 125, pp.309~318 (2003)
- Odyck van, D. E. A., "Stokes Flow in Thin Films", Journal of Tribology, 125, pp.121~134 (2003)
- Sahlin, F., "Two-Dimensional CFD Analysis of Micro- Patterned Surfaces in Hydrodynamic Lubrication", ASME Journal of Tribology, 127, pp.96~102 (2005)
- Odyck van, D. E. A., "Compressible Stokes Flow in Thin Films", ASME Journal of Tribology, 125, pp.543~551 (2003)
- Almqvist, T., "Some Remarks on the Validity of Reynolds Equation in the Modeling of Lubricant Film Flows on the Surface Roughness Scale", ASME Journal of Tribology, 126, pp.703~710 (2004)
- Li, J., "Evaluation on Applicability of Reynolds Equation for Squared Transverse Roughness Compared to CFD", ASME Journal of Tribology, 129, pp.963~967 (2007)
- Dobrica, M. B., "About the Validity of Reynolds Equation and Inertia Effects in textured Sliders of Infinite Width", Proc. IMechE, 223, pp.69~78 (2009)
- 홍성호, "스풀밸브 해석에서 Navier-Stokes 방정식과 Reynolds 방정식에 의한 비교 연구", 한국윤활학회지, 28(5), pp.218~232 (2012), 한국윤활학회
- Singhal, A. K., "Mathematical Basis and Validation of the Full Cavitation Model", Journal of Fluids Engineering, 124, pp.617~624 (2002)