Ti-8Ta-3Nb 합금의 표면처리에 의한 백서 두개관 세포의 반응
Biological response of primary rat calvarial cell by surface treatment of Ti-8Ta-8Nb alloy
2
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
Purpose: Ti-6Al-4V alloy is widely used as an implant material because of its good biocompatibility and good mechanical property compared with commercial pure titanium. Otherwise, toxicity of aluminum and vanadium in vivo has been reported. Ti-8Ta-3Nb alloy is recently developed in the R&D Center for Ti and Special Alloys and it was reported that this alloy has high mechanical strength, no cytotoxicity and similar biocompatibility to commercial pure titanium, but many studies are needed for its clinical use. In these experiment, we carried out different surface treatment on each Ti-8Ta-3Nb alloy disks, then cultured cell on it and assessed biological response. Materials and Methods: cpTi, Ti-6Al-4V, Ti-8Ta-3Nb alloy disks were prepared and carried out sandblasting and acid etching (SLA) or alkali-heat treatment (AH) on the Ti-8Ta-3Nb alloy disks. We cultured primary rat calvarial cells on each surface and assessed early cell attachment and proliferation by scanning electron microscopy, cell proliferation, alkaline phosphatase activity. Result: The rates of cell proliferation on the cpTi, Ti-8Ta-3Nb AH disks were higher than others (p<0.05) and alkaline phosphatase activity was significantly enhanced on the Ti-8Ta-3Nb AH disks (p<0.05). Conclusion: Most favorable cell response was shown on the Ti-8Ta-3Nb AH surfaces. It is supposed that alkali-heat treatment of the Ti-8Ta-3Nb alloy could be induced earlier bone healing and osseointegration than smooth surface. (J Korean Acad Periodontol 2008;38:595-602)
Abstract
Purpose: Ti-6Al-4V alloy is widely used as an implant material because of its good biocompatibility and good mechanical property compared with commercial pure titanium. Otherwise, toxicity of aluminum and vanadium in vivo has been reported. Ti-8Ta-3Nb alloy is recently developed in the R&D Center for Ti and Special Alloys and it was reported that this alloy has high mechanical strength, no cytotoxicity and similar biocompatibility to commercial pure titanium, but many studies are needed for its clinical use. In these experiment, we carried out different surface treatment on each Ti-8Ta-3Nb alloy disks, then cultured cell on it and assessed biological response. Materials and Methods: cpTi, Ti-6Al-4V, Ti-8Ta-3Nb alloy disks were prepared and carried out sandblasting and acid etching (SLA) or alkali-heat treatment (AH) on the Ti-8Ta-3Nb alloy disks. We cultured primary rat calvarial cells on each surface and assessed early cell attachment and proliferation by scanning electron microscopy, cell proliferation, alkaline phosphatase activity. Result: The rates of cell proliferation on the cpTi, Ti-8Ta-3Nb AH disks were higher than others (p<0.05) and alkaline phosphatase activity was significantly enhanced on the Ti-8Ta-3Nb AH disks (p<0.05). Conclusion: Most favorable cell response was shown on the Ti-8Ta-3Nb AH surfaces. It is supposed that alkali-heat treatment of the Ti-8Ta-3Nb alloy could be induced earlier bone healing and osseointegration than smooth surface. (J Korean Acad Periodontol 2008;38:595-602)
참고문헌 (29)
- Lausmaa J, "Surface spectroscopic characterization of titanium implant materials", Journal of Electron Spectroscopy and Related Phenomena, 81, pp.343~361 (1996)
- Okazaki Y, "Comparison of metal concentration in rat tibia tissues with various metallic implants", Biomaterials, 25, pp.5913~5920 (2004)
- Okazaki Y, "Comparison of metal release from various metallic biomaterials in vitro", Biomaterials, 26, pp.11~21 (2005)
- Hallb NJ, "Effects of soluble metals on human peri-implant cells", J Biomed Mater Res, 74A, pp.124~140 (2005)
- Gordin DM, "Development of a β-type Ti-12Mo-5Ta alloy for biomedical applications: cytocompatibility and metallurgical aspects", J Mat Sci, 15, pp.885~891 (2004)
- Niinomi M, "Recent metallic materials for biomedical applications", Metal Master Trans, 33A, pp.477~486 (2002)
- In Goo Cho, "Biocompatibility of Ti-8Ta-3Nb alloy with fetal rat calvarial cell", J Kor Acad Periodontol, 36, pp.849~861 (2006)
- Nanci A, "Chemical modification of titanium surfaces for covalent attachment of biological molecules", J Biomed Mater Res, 40, pp.324~335 (1998)
- Taborelli M, "Influence of surface treatments developed for oral implants on the physical and biological properties of titanium. (I) Surface characterization", Clin Oral Impl Res, 8, pp.208~216 (1997)
- Michaels C, "In vitro cell attachment of osteoblast-like cells to titanium", J Dent Res, 68, pp.276~281 (1989)
- Bowers KT, "Optimization of surface micromorphology for enhanced osteoblast responses in vitro", Int J Oral Maxillofacial Implants, 7, pp.302~310 (1992)
- Lincks J, "Response of MG63 osteoblast-like cells to titanium and titanium alloy os dependent of surface roughness and composition", Biomaterials, 19, pp.2219~2232 (1998)
- Martin JY, "Proliferation, differentiation, and protein synthesis of human osteoblast-like cells(MG63) cultured on previously used titanium surfaces", Clin Oral Impl Res, 7, pp.27~37 (1996)
- Cooper LF, "Formation of mineralizing osteoblast cultures on machined, titanium oxide grit-blasted, and plasma-sprayed titanium surfaces", Int J Oral Maxillofacial Implants, 14, pp.37~47 (1999)
- Wennerberg A, "A histomorphometric and removal torque study of screw-shaped titanium implants with three different surface toporaphies", Clin Oral Impl Res, 6, pp.24~30 (1995)
- Wennerberg A, "Bone tissue response to commercially pure titanium implants blasted with fine and coarse particles of aluminum oxide", Int J Oral Maxillofacial Implants, 11, pp.38~45 (1996)
- Wennerberg A, "A 1-year follow-up of implants of differing surface roughness placed in rabbit bone", Int J Oral Maxillofacial Implants, 12, pp.486~494 (1997)
- Piattelli A, "Histologic and histomorphometric analysis of the bone response to machined and sandblasted titanium implants: An experimental study in rabbits", Int J Oral Maxillofacial Implants, 13, pp.805~810 (1998)
- Nishiguchi S, "The effect of the heat treatment on bone-bonding ability of alkali-treated titanium", Biomaterials, 20, pp.491~500 (1999)
- Nishiguchi S, "Alkali- and heat-treated porous titanium for orthopedic implant", Biomaterials, 22, pp.2525~2533 (2001)
- Nishiguchi S, "Biology of alkali-and heat-treated titanium implants", J Biomed Mater Res, 67A, pp.26~35 (2003)
- Bretaudiere JP, "Alkaline phosphatase. In: Methods of enzymatic analysis", pp.75~92 (1984), Verlag Chemica
- Sung-Wook Kim, "Surface modification of biomaterials for hard tissue substitutes to improve biocompatibility and osteoconductivity", J Korean Ind Eng Chem, 6, pp.725~730 (2005)
- Vrouwenvelder WCA, "Histological and biochemical evaluation of osteoblasts cultured on bioactive glass, hydroxyapatite, titanium alloy, and stainless steel", J Biomed Mater Res, 27, pp.465~474 (1993)
- Nygren H, "The initial reactions of Tio2 With blood", J Biomed Mater Res, 34, pp.487~492 (1997)
- Lohmann CH, "Surface roughness modulates the response of MG63 osteoblast-like cells to 1,25-(OH)2D3 through regulation of phospholipase A2 activity and activation of protein kinase A", J Biomed Mater Res, 47, pp.139~151 (1999)
- Kim H-M, "Preparation of bioactive Ti and its alloys via simple chemical surface treatment", J Biomed Mater Res, 32, pp.409~417 (1996)
- Dion L, "Haemocompatibility of Ti-6Al-4V alloy", Biomaterials, 14, pp.122~126 (1993)
- Katsikeris N, "Interface between titanium-6,4 alloy implants and bone", Int J oral Maxillofac Surg, 16, pp.473~476 (1987)