Comparison of the Strain on the Alveolar Ridge According to the Occlusal Scheme of Complete Dentures
1
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
The purpose of this study was to compare the strain on the alveolar ridge in the centric, eccentric and protrusive position according to the occlusal scheme (bilateral balanced occlusion with 33 degree anatomical teeth, group B; monoplane occlusion with non-anatomical teeth, group M; lingualized occlusion with 33 degree anatomical teeth and non-anatomical teeth, group L; of complete dentures. Experimental dentures were set bilateral balanced occlusion, lingualized occlusion and monoplane occlusion. They are analysed through T-Scan II(Tekscan, Boston, U.S.A) and 1.5mm thick layer was removed from the denture-supporting surface of resin model and then replaced with silicone to simulate resilient edentulous ridge mucosa. A 4x6 linear strain gauge is attached to the 1st premolar and 1st molar area. The strain values are recorded according to the occlusal scheme in the centric, eccentric and protrusive position after uniformly applying 50 N and 150 N force through a Universal Testing Machine(instron® 5567, Bluehill 2.0 software ,U.S.A.) with the models mounted in the articulator. When performing centric and protrusive occlusion, the three groups of occlusal scheme were compared in the anterior region and in the posterior region. The strains of each group were also compared in the working side and in the non-working side during eccentric excursion. It was observed that the strain in the bilateral balanced occlusion showed a higher value than the lingualized occlusion and monoplane occlusion in every position except the non-working side. However, during the eccentric movement the strain value in the non-working side showed the lowest value in the bilaterally balanced occlusion. The strain change amount from the working side or centric occlusion to non-working side and also the strain variation rate within the non-working side showed the highest value in bilateral balanced occlusion.
Abstract
The purpose of this study was to compare the strain on the alveolar ridge in the centric, eccentric and protrusive position according to the occlusal scheme (bilateral balanced occlusion with 33 degree anatomical teeth, group B; monoplane occlusion with non-anatomical teeth, group M; lingualized occlusion with 33 degree anatomical teeth and non-anatomical teeth, group L; of complete dentures. Experimental dentures were set bilateral balanced occlusion, lingualized occlusion and monoplane occlusion. They are analysed through T-Scan II(Tekscan, Boston, U.S.A) and 1.5mm thick layer was removed from the denture-supporting surface of resin model and then replaced with silicone to simulate resilient edentulous ridge mucosa. A 4x6 linear strain gauge is attached to the 1st premolar and 1st molar area. The strain values are recorded according to the occlusal scheme in the centric, eccentric and protrusive position after uniformly applying 50 N and 150 N force through a Universal Testing Machine(instron® 5567, Bluehill 2.0 software ,U.S.A.) with the models mounted in the articulator. When performing centric and protrusive occlusion, the three groups of occlusal scheme were compared in the anterior region and in the posterior region. The strains of each group were also compared in the working side and in the non-working side during eccentric excursion. It was observed that the strain in the bilateral balanced occlusion showed a higher value than the lingualized occlusion and monoplane occlusion in every position except the non-working side. However, during the eccentric movement the strain value in the non-working side showed the lowest value in the bilaterally balanced occlusion. The strain change amount from the working side or centric occlusion to non-working side and also the strain variation rate within the non-working side showed the highest value in bilateral balanced occlusion.
참고문헌 (37)
- Ortman HR, "Complete denture occlusion. In Essentials of Complete Denture Prosthodontics, ed 2", pp.17~90 (1994), WB Saunders
- Renner RP, "Practical complete denture occlusion. In Complete Dentures. A Guide for Patient Treatment", pp.120~151 (1981), Masson
- Heartwell CM Jr, "Tooth Arrangement. Syllabus of Complete Dentures, ed 4", pp.327~342 (1986), Lea & Febiger
- Boucher CO, "Arrangement of posterior teeth for functional harmony. In Prosdontic Treatment for Edentulous Patient ,ed7", pp.413~446 (1975), Mosby
- Schultz AW, "Comfort and chewing efficiency in dentures", J Procthet Dent, 1, pp.38~48 (1951)
- Payne SH, "A comparative study of posterior occlusion", J Prosthet Dent, 2, pp.661~665 (1952)
- Trapozzano VR, "An experimental study of the testing of occlusal patterns on the same denture base", J Prosthet Dent, 2, pp.440~457 (1952)
- Clough HE, "A comparison of lingualized occlusion and monoplane occlusion in complete denture", J Prosthet Dent, 50, pp.176~79 (1983)
- Michael CG, "Biting strength and chewing forces in complete denture wearers", J Prosthet Dent, 63, pp.549~553 (1990)
- Thompson MJ, "Efficiency as related to cusp form in denture prosthesis", J Am Dent Assoc, 24, pp.207~219 (1937)
- Stephen LO, "Photoelastic comparison of posterior denture occlusions", J Prosthet Dent, 40, pp.18~22 (1978)
- Kelsey CC, "Alveolar bone resorption under complete dentures", J Prosthet Dent, 25(3), pp.152~161 (1971)
- Campbell RL, "A comparartive study of the resorption of the alveolar ridges in denture-wearers and nondenture wearers", J Am Dent Assoc, 60, pp.143~153 (1960)
- Jozefowicz W, "The influence of wearing dentures on residual ridges-A comparative study", J Prosthet Dent, 24(2), pp.137~144 (1970)
- Tallgren A, "Alveolar bone loss in denture wearers as related to facial morphology", Acta Odontol Scand, 28(2), pp.251~270 (1970)
- Atwood, DA, "Clinical. cephalometric, and densito- metric study of the reduction of residual ridges", J Prosthet Dent, 26(3), pp.280~295 (1971)
- Tallgren A, "The continuing reduction of the residual alveolar ridges in complete denture wearers : A mixed longitudinal study covering 25 years", J Prosthet Dent, 27(2), pp.120~132 (1972)
- Neufeld, JO, "Changes in the trabecular pattern of the mandible following the loss of teeth", J Prosthet Dent, 8, pp.685~ (1958)
- Ortman H, "The role of occlusion in preservation and prevention in complete prosthodontics", J Prosthet Den, 25(3), pp.121~138 (1971)
- Wright C, "Evaluation of the factors necessary to develop stsbility in mandibular dentures", J Prosthet Dent, 16(3), pp.414~430 (1966)
- Sears V, "Thirty years of non-anatomic teeth", J Prosthet Dent, 3, pp.596~ (1953)
- Nogueira SS, "Compagnoni MA, De", J Prosthet Dent, 91, pp.386~388 (2004)
- Mizui M, "Quantitative analysis of occlusal balance in intercuspal position using the T-Scan System", Int J Prosthodont, 7, pp.62~71 (1994)
- Kapur KK, "An evaluation of centric relation records obtained by various techniques", J Prosthet Dent, 7, pp.770~786 (1957)
- Francesco OL, "New method for analyzing complete denture occlusion using the center of force concept:A case report", J Prosthet Dent, 80, pp.519~523 (1998)
- Jacobson TE, "A contemporary review of the factors involved in complete dentures. Part II : stability", J Prosthet Dent, 49, pp.165~172 (1983)
- Boening KW, "Computer-aided evaluation of occlusal load in complete dentures", J Prosthet Dent, 67, pp.339~344 (1992)
- H. Uchida, "Measurement in vivo of masticatory mucosal thickness with 20 MHz B-mode ultrasonic diagnostic equipment", J Dent Rec, 68, pp.95~100 (1989)
- Kydd W, "Complete denture base deformation with varied occlusal tooth forms", J Prosthet Dent, 6, pp.714~ (1956)
- Swoope CC Jr, "The effect of cusp form and occlusal area in denture base deformation", J Prosthet Dent, 16, pp.34~43 (1966)
- Sharry JJ, "Influence of artificial tooth forms on bone deformation beneath complete dentures", J Dent Res, 39, pp.253~266 (1960)
- Stromberg WR, "A Method of Measuring Forces of Denture Bases Against Supporting Tissues", J Prosthet Dent, 5, pp.268~288 (1955)
- Johnson W, "A study of stress distribution in complete upper dentures", Dent Pract Dent Rec, 15, pp.371~ (1965)
- Maeda Y, "Finite element method stimulation of bone resorption beneath a complete denture", J Dent Res, 68, pp.1370~1373 (1989)
- Inoue S, "An in vitro study of influence of occlusal scheme on pressure distribution of complete denture supporting tissues", Int J Prosthodont, 9, pp.179~187 (1996)
- Ohguri T, "Influence of occlusal scheme on the pressure distribution under a complete denture", Int J Prosthodont, 12, pp.353~358 (1999)
- Pound E, "Utilizing speech to simplify a personalized denture service", J Prosthet Dent, 24, pp.586~600 (1970)