본문 바로가기
KERD
논문KCI 등재

현재 존재하는 구강 스캐너에 대한 고찰

Review of recent developments for intra-oral scanners

이원진|이승표|임영준|한중석|최종훈
대한턱관절교합학회 (Korean academy of stomatognathic function and occlusion)|2015.06|구강회복응용과학지 (Journal of Dental Rehabilitation and Applied Science)|제31권 제2호|pp. 112-125|DOI http://dx.doi.org/10.14368/jdras.2015.31.2.112

1

조회

0

다운로드

6

인용

0

참고문헌

키워드

디지털 인상구강 스캐너3-d 이미지화intra-oral scannerdigital dental impressionthree-dimensional imaging
주제분류치의학

초록

구강 내의 모습을 재현하는 복제모델을 만드는 것은 치과 진료에서 가장 중요한 과정이며 정확성과 효율성이 동시에 만족되어야 하는 과정이다. 현재 기술이 발전함에 따라 치과 진료에서도 디지털화가 이루어지고 있다. 이러한 것을 가능하게 하는 가장 중요한 작업 중 하나가 바로 구강 내의 모습을 3차원적으로 재구성하는 디지털화이다. CAD/CAM 시스템의 3가지 성분 ① data capture component (digitizers), ② design component (CAD software), ③ manufacturing component (CAM)중 가장 기본이 되며 뒤의 과정에 막대한 영향을 끼치는 것이 data capture component 즉 구강 스캐너이다. 이 논문은 Pubmed와 Google Scholar에서 최근 5년 전 연구 논문들을 기초로 하여, 각각의 스캐너의 구동원리와 스캐너들 간의 정확성, 현재 구강 스캐너가 치과 영역에서 적용되고 있는 분야와 그 정도를 분석하였다.

Abstract

Making a model that is an accurate replica of the oral structure requires precision and efficiency. Nowadays, rapid technological advances bring digitalization in dentistry. One of the most important works in digital dentistry is three-dimensional modeling of the oral cavity and digitizing the 3D data. Among the three components of CAD/CAM, data capture component (digitizers), ② design component (CAD software), ③ manufacturing component (CAM), the basic component that has a significant impact on the other processes is the data capture component, i.e. intra-oral scanners. This literature review discusses the principles and clinical use of intra-oral scanners in dentistry based on recent publications of the past 5 years using the PubMed and Google Scholar databases.

참고문헌 (49)

  1. Ali P, "A reliable 3D laser triangulationbased scanner with a new simple but accurate procedure for finding scanner parameters", J Am Sci, 6, pp.80~85 (2010)
  2. Kostiukova VV, "A Comparative Analysis Of Intra-oral 3d digital scanners for restorative dentistry", Stomatologiia(Mosk), 93, pp.53~59 (2014)
  3. Franca JGDM, "A 3D scanning system based on laser triangulation and variable field of view", IEEE Intl Conf 2005, 1, pp.425~428 (2005)
  4. Wang L, "A Novel double triangulation 3D camera design", IEEE Intl Conf Info 2006, pp.877~882 (2006)
  5. El-Hakim SF, "Comparative evaluation of the performance of passive and active 3D vision systems", Proc. SPIE 2646, Digital Photogrammetry and Remote Sensing ‘95, 14 (1995)
  6. Lombardo V, "A time-of-scan laser triangulation technique for distance measurements", Opt Laser Eng, 39, pp.247~254 (2003)
  7. Logozzo S, "Recent advances in dental optics-Part I : 3D intra-oral scanners for restorative dentistry", Opt Laser Eng, 54, pp.203~221 (2014)
  8. Birnbaum NS, "3D digital scanners : a high tech approach to more accurate dental impressions", Inside Dent, 5, pp.70~74 (2009)
  9. Thiel F, "Apparatus and method for optical 3D measurement", US Patent 2011, 2011
  10. Thiel E, "Apparatus and method for optical 3D measurement", International Publication WO Patent 2008, 2008
  11. Schmidt V., "3D dental camera for recording surface structures of a measuring object by means of triangulation", International Publication WO Patent 2010, 2010
  12. Pawley JB, "Handbook of biological confocal microscopy" (2006), Springer
  13. "Olympus FluoView Resource Center: introduction to confocal microscopy"[URL]
  14. Babayoff N, "Imaging a three dimensional structure by confocal focusing an array of light beams", International Publication WO Pat-ent 2000, 2000
  15. "Digital impressions competition booming"[URL]
  16. Babayoff N, "Glaser-Inbari I. Method and apparatus for imaging three-dimensional structure", US Patent 2007, 2007
  17. Babayoff N, "Method and apparatus for colour imaging a three dimensional structure", US Patent 2010, 2010
  18. Jacobson B., "Taking the headache out of impressions", Dent Today, 26, pp.74~76 (2007)
  19. "3Shape TRIOSs digital impression solution"[URL]
  20. Fisker R, "Focus scanning apparatus", International Publication WO Patent 2010, 2010
  21. "3d image reconstruction using active wavefront sampling"[URL]
  22. Fasbinder DJ., "Digital workflow for the Lava C.O.S system", Inside Dent, 5 (2009)
  23. "LavaTM ScanSToptical scanning system"[URL]
  24. Hart DP, "3-D imaging system", US Patent 2004, 2004
  25. "Making the switch to the Lava C.O.S"[URL]
  26. An S, "Evaluating the marginal fit of zirconia copings with digital impressions with an intra-oral digital scanner", J Prosthet Dent, 112, pp.1171~1175 (2014)
  27. Ng J, "A comparison of the marginal fit of crowns fabricated with digital and conventional methods", J Prosthet Dent, 112, pp.555~560 (2014)
  28. 이완선, "Evaluation of different approaches for using a laser scanner in digitization of dental impressions", The Journal of Advanced of Prosthodontics, 6(1), pp.22~29 (2014), 대한치과보철학회[DOI]
  29. Keul C, "Fit of 4-unit FDPs made of zirconia and CoCr-alloy after chairside and labside digitalization-a laboratory study", Dent Mater, 30, pp.400~407 (2014)
  30. Syrek A, "Clinical evaluation of all-ceramic crowns fabricated from intra-oral digital impressions based on the principle of active wavefront sampling", J Dent, 38, pp.553~559 (2010)
  31. Almeida e Silva JS, "Marginal and internal fit of four-unit zirconia fixed dental prostheses based on digital and conventional impression techniques", Clin Oral Investig, 18, pp.515~523 (2014)
  32. Baig MR, "Evaluation of the marginal fit of a zirconia ceramic computer-aided machined(CAM)crown system", J Prosthet Dent, 104, pp.216~227 (2010)
  33. Wang YG, "Preliminary evaluation of clinical effect of computer aided design and computer aided manufacture zirconia crown", Zhonghua Kou Qiang Yi Xue Za Zhi, 48, pp.355~358 (2013)
  34. Scotti R, "WITHDRAWN: Clinical fitting of CAD", CAM zirconia single crowns generated from digital intraoral impressions based on active wavefront sampling, 2011, ~
  35. Tamim H, "Clinical evaluation of CAD", CAM metal-ceramic posterior crowns fabricated from intra-oral digital impressions, 2014, pp.27, 331~337
  36. Brawek PK, "The clinical accuracy of single crowns exclusively fabricated by digital workflow-the comparison of two systems", Clin Oral Investig, 17, pp.2119~2125 (2013)
  37. Seelbach P, "Accuracy of digital and conventional impression techniques and workflow", Clin Oral Investig, 17, pp.1759~1764 (2013)
  38. Re D, "Comparison of marginal fit of Lava CAD", CAM crown-copings with two finish lines, 2014, pp.9, 426~435
  39. Souza RO, "Marginal and internal discrepancies related to margin design of ceramic crowns fabricated by a CAD", CAM system, 2012, pp.21, 94~100
  40. Renne W, "Predicting marginal fit of CAD", CAM crowns based on the presence or absence of common preparation errors, 2012, pp.108, 310~315
  41. Giménez, B, "Accuracy of a digital impression system based on parallel confocal laser technology for implants with consideration of operator experience and implant angulation and depth", Int J Oral Maxillofac Implants, 29, pp.853~862 (2014)
  42. Abdel-Azim T, "The influence of digital fabrication options on the accuracy of dental implant-based single units and complete-arch frameworks", Int J Oral Maxillofac Implants, 29, pp.1281~1288 (2014)
  43. Papaspyridakos P, "Accuracy of implant impressions for partially and completely edentulous patients : a systematic review", Int J Oral Maxillofac Implants, 29, pp.836~845 (2014)
  44. Stoetzer M, "Nonradiological method for 3-dimensional implant position assessment using an intra-oral scan : new method for postoperative implant control", Implant Dent, 23, pp.612~616 (2014)
  45. Nickenig HJ, "An alternative method to match planned and achieved positions of implants, after virtual planning using cone-beam CT data and surgical guide templates-a method reducing patient radiation exposure (part I)", J Craniomaxillofac Surg, 38, pp.436~440 (2010)
  46. Mandelaris GA, "Guided implant surgery with placement of a presurgical CAD", CAM patient-specific abutment and provisional in the esthetic zone, 2014, pp.35, 494~504
  47. Stapleton BM, "Application of digital diagnostic impression, virtual planning, and computer-guided implant surgery for a CAD", CAM-fabricated, implantsupported fixed dental prosthesis: a clinical report, 2014, pp.112, 402~408
  48. Ender A, "Accuracy of complete-arch dental impressions : a new method of measuring trueness and precision", J Prosthet Dent, 109, pp.121~128 (2013)
  49. Kattadiyil MT, "Intra-oral scanning of hard and soft tissues for partial removable dental prosthesis fabrication", J Prosthet Dent, 112, pp.444~448 (2014)

관련 논문AI추천

디지털 치과모형의 정확도 평가 방법에 대한 고찰김봉주, 박지수, 이정원, 임영준대한턱관절교합학회 · 구강회복응용과학지2019 · 제35권 제2호Intraoral Scanner와 CAD Software의 보철 과정에서의 활용: 증례 보고김윤정, 도레미, 민승준, 송승례, 유태민, 최정임대한통합치과학회 · 대한통합치과학회지2024 · 제13권 제3호Comparative analysis on reproducibility among 5 intraoral scanners: sectional analysis according to restoration type and preparation outline form박지만대한치과보철학회 · The Journal of Advanced of Prosthodontics2016 · 제8권 제5호세 가지 방식의 스캐너 종류에 따른 모형 정확도 평가김웅철, 김지환, 박진영, 배소연, 이재준, 전진훈한국치위생과학회 · 치위생과학회지2015 · 제15권 제2호단일 수복물과 3본 고정성 수복물 지대치 모델에서 삼차원 분석을 통한 구강 스캐너의 정확도 비교이규복, 이완선, 황미양, 손큰바다대한치과보철학회 · 대한치과보철학회지2019 · 제57권 제2호여러 보철 치료 술식에 따른 바른 스캐닝 과정과 구강스캐너의 활용박은진, 박지만, 허성주대한치과의사협회 · 대한치과의사협회지2014 · 제52권 제6호

이 간행물의 다른 논문 (9건)

색상차이에 따른 FRC-포스트와 코어 사이의 구별박세희, 김진우, 김주회, 조경모pp. 75-85악기연주자의 측두하악장애 징후와 증상장재영, 배정희, 최영찬, 김성택pp. 86-95하부구조물 및 두께에 따른 치과 수복용 세라믹의 색조에 대한 분광측색분석송영균pp. 96-103콘빔CT (Cone beam computed tomography, CBCT)를 이용한 상악 대구치에서의 C-형 치근 및 근관에 관한 연구김진우, 박세희, 김성민, 조경모, 지효진pp. 104-111Multidisciplinary approach of the problem of unaesthetic implants in the maxillary anterior dentition주지영, 최점일, 이주연pp. 126-133
원문 보기