Intraoral Scanner와 CAD Software의 보철 과정에서의 활용: 증례 보고
Use of Intraoral Scanners for Fabricating Fixed Dental Prostheses: A Case Report
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
As computer-aided design and manufacturing (CAD/CAM) technology has advanced, the use of optical impression data from intraoral scanners (IOS) is increasingly being explored in various areas of dental practice. IOS has been shown to provide clinically acceptable accuracy for single implants, and ongoing evaluations are assessing the accuracy and marginal compatibility of prosthetics produced via IOS for multiple implants and natural teeth. This case report aims to present the use of various functions of an intraoral scanner in the overall process of fixed prosthesis fabrication including single implant, from diagnosis and treatment planning to treatment and maintenance. In particular, through intraoral scanning, intraoral information can be more easily recorded and reflected in the production of prosthetics.
Abstract
As computer-aided design and manufacturing (CAD/CAM) technology has advanced, the use of optical impression data from intraoral scanners (IOS) is increasingly being explored in various areas of dental practice. IOS has been shown to provide clinically acceptable accuracy for single implants, and ongoing evaluations are assessing the accuracy and marginal compatibility of prosthetics produced via IOS for multiple implants and natural teeth. This case report aims to present the use of various functions of an intraoral scanner in the overall process of fixed prosthesis fabrication including single implant, from diagnosis and treatment planning to treatment and maintenance. In particular, through intraoral scanning, intraoral information can be more easily recorded and reflected in the production of prosthetics.
참고문헌 (19)
- Kang B-G, "Accuracy of the CT guided implant template by using an intraoral scanner according to the edentulous distance", J Korean Acad Prosthodont, 55, pp.1~8 (2017)
- Ng J, "A comparison of the marginal fit of crowns fabricated with digital and conventional methods", J Prosthet Dent, 112, pp.555~560 (2014)
- Keul C, "Fit of 4-unit FDPs made of zirconia and CoCr-alloy after chairside and labside digitalization-a laboratory study", Dent Mater, 30, pp.400~407 (2014)
- Syrek A, "Clinical evaluation of all-ceramic crowns fabricated from intraoral digital impressions based on the principle of active wavefront sampling", J Dent, 38, pp.553~559 (2010)
- Rudolph H, "Computer-aided analysis of the influence of digitizing and surfacing on the accuracy in dental CAD", CAM technology, 2007, pp.37, 579~587
- Ma J, "Accuracy of digital implant impressions obtained using intraoral scanners : a systematic review and meta-analysis of in vivo studies", Int J Implant Dent, 9, pp.48~ (2023)
- Chochlidakis K, "Digital versus conventional full-arch implant impressions : a prospective study on 16 edentulous maxillae", J Prosthodont, 29, pp.281~286 (2020)
- Mangano F, "Intraoral scanners in dentistry : a review of the current literature", BMC Oral Health, 17, pp.149~ (2017)
- Tsirogiannis P, "Evaluation of the marginal fit of single-unit, complete-coverage ceramic restorations fabricated after digital and conventional impressions : a systematic review and meta-analysis", J Prosthet Dent, 116, pp.328~335 (2016)
- Kerstein RB, "Clinician accuracy when subjectively interpreting articulating paper markings", Cranio, 32, pp.13~23 (2014)
- Zhao Z, "Construction of a novel digital method for quantitative analysis of occlusal contact and force", BMC Oral Health, 23, pp.190~ (2023)
- Revilla-León M, "Locating centric occlusion by using intraoral scanners and open access or dental computer-aided design programs: a dental technique", J Prosthet Dent (2024)[DOI]
- Chochlidakis KM, "Digital versus conventional impressions for fixed prosthodontics : a systematic review and meta-analysis", J Prosthet Dent, 116, pp.184~190 (2016)
- Ayuso-Montero R, "Reliability and validity of T-scan and 3D intraoral scanning for measuring the occlusal contact area", J Prosthodont, 29, pp.19~25 (2020)
- Nedelcu RG, "Scanning accuracy and precision in 4intraoral scanners : an in vitro comparison based on 3-dimensional analysis", J Prosthet Dent, 112, pp.1461~1471 (2014)
- Park J-M, "Accuracy comparison of buccal bite scans by five intra-oral scanners", J Dent Rehabil Appl Sci, 34, pp.17~31 (2018)
- Kim MJ, "Accuracy of digital surgical guides for dental implants", Maxillofac Plast Reconstr Surg, 44, pp.35~ (2022)
- Sarment DP, "Accuracy of implant placement with a stereolithographic surgical guide", Int J Oral Maxillofac Implants, 18, pp.571~577 (2003)
- Ma B, "The accuracy of a 3D printing surgical guide determined by CBCT and model analysis", J Adv Prosthodont, 10, pp.279~285 (2018)