Effects of the Angulation of Orthodontic Mini-Implant as an Indirect Anchorage : A Three-Dimensional Finite Element Analysis
4
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
The purpose of this study was to investigate the displacement and pattern of stress distribution on periodontal ligaments of maxillary first and second molar, and on orthodontic mini-implant (OMI) surface, according to three different insertion angles to the bone surface of OMI using Dragon helix appliance, which is a newly introduced scissors-bite correcting appliance. OMI were placed between second premolar and first molar with three different insertion angles (45, 60, 90 degrees). Displacement and maximum stress distribution area (MSDA) were analyzed by finite element analysis. When the insertion angle to the alveolar bone surface was 90 degrees, maxillary first and second molar both exhibited MSDA at the palatal root apex. Maxillary first molar did not show any significant displacement, while the second molar exhibited intrusive and palatal displacement. On the OMI, as the insertion angle decreased, the MSDA shifted towards the tip, and the amount of displacement had increased. When the OMI was inserted at a 90 degree angle, anchor loss was minimized and scissors-bite correcting effect was maximized
Abstract
The purpose of this study was to investigate the displacement and pattern of stress distribution on periodontal ligaments of maxillary first and second molar, and on orthodontic mini-implant (OMI) surface, according to three different insertion angles to the bone surface of OMI using Dragon helix appliance, which is a newly introduced scissors-bite correcting appliance. OMI were placed between second premolar and first molar with three different insertion angles (45, 60, 90 degrees). Displacement and maximum stress distribution area (MSDA) were analyzed by finite element analysis. When the insertion angle to the alveolar bone surface was 90 degrees, maxillary first and second molar both exhibited MSDA at the palatal root apex. Maxillary first molar did not show any significant displacement, while the second molar exhibited intrusive and palatal displacement. On the OMI, as the insertion angle decreased, the MSDA shifted towards the tip, and the amount of displacement had increased. When the OMI was inserted at a 90 degree angle, anchor loss was minimized and scissors-bite correcting effect was maximized
참고문헌 (25)
- Yun SW, "Scissors- bite correction on second molar with a dragon helix appliance", Am J Orthod Dentofacial Orthop, 132, pp.842~847 (2007)
- Moffitt AH, "Eruption and function of maxillary third molars after extraction of second molars", Angle Orthod, 68, pp.147~152 (1998)
- Orton-Gibbs S, "Eruption of third permanent molars after the extraction of second permanent molars. Part 2: Functional occlusion and periodontal status", Am J Orthod Dentofacial Orthop, 119, pp.239~244 (2001)
- Kucher G, "Goal-oriented positioning of upper second molars using the palatal intrusion technique", Am J Orthod Dentofacial Orthop, 110, pp.466~468 (1996)
- Chun YS, "Maxillary molar intrusion with the molar intrusion arch", J Clin Orthod, 34, pp.90~93 (2000)
- Burstone CJ, "Precision lingual arches. Active applications", J Clin Orthod, 23, pp.101~109 (1989)
- 채종문, "Indirect palatal skeletal anchorage (PSA)를 이용한 골격성 I급 양악 치성 전돌 환자의 치험례", 대한치과교정학회지, 34(5), pp.458~464 (2004), 대한치과교정학회
- Chun YS, "An experimental study on the dymamic tooth moving effects of two precision ligual arches(PLA) for correction of posterior scissor bite by the Calorific machine", Korean J Orthod, 24, pp.721~733 (1998)
- Park HS, "Uprighting second molar with micro-implant anchorage", J Clin Orthod, 38, pp.100~103 (2004)
- Park HS, "A simple method of molar uprighting with micro-implant anchorage", J Clin Orthod, 36, pp.592~596 (2002)
- Kyung HM, "The use of miniscrew as an anchorage for the orthodontic tooth movement", Korean J Orthod, 31, pp.415~424 (2001)
- Yun SW, "Molar control using indirect mini-screw anchorage", J Clin Orthod, 39, pp.661~664 (2005)
- Kyung SH, "Bonding orthodontic attachment to miniscrew heads", J Clin Orthod, 39, pp.348~353 (2005)
- Miyawaki S, "Factors associated with the stability of titanium screws placed in the posterior region for orthodontic anchorage", Am J Orthod Dentofacial Orthop, 124, pp.373~378 (2003)
- Deguchi T, "Quantitative evaluation of cortical bone thickness with computed tomographic scanning for orthodontic implants", Am J Orthod Dentofacial Orthop, 129(721), pp.727~712 (2006)
- Kim HJ, "Soft-tissue and cortical-bone thickness at orthodontic implant sites", AMERICAN JOURNAL OF ORTHODONTICS AND DENTOFACIAL ORTHOPEDICS, 130(3), pp.177~182 (2006)
- Kim SH, "Evaluation of interdental space of the maxillary posterior area for orthodontic mini-implants with cone-beam computed tomography", AMERICAN JOURNAL OF ORTHODONTICS AND DENTOFACIAL ORTHOPEDICS, 135, pp.635~641, mosby-elsevier
- 박효상, "CT 이미지를 사용한 Micro-implants 식립을 위한 해부학적 연구", 대한치과교정학회지, 32(6), pp.435~441 (2002), 대한치과교정학회
- Kyung HM, "Development of orthodontic micro-implants for intraoral anchorage", J Clin Orthod, 37, pp.321~328 (2003)
- Park YC, "Atlas of contemporary orthodontics" (2006), Seoul: Shinheung international 2006
- Min-Ji Kim, "Effects of orthodontic mini-implant position in the dragon helix appliance on tooth displacement and stress distribution: a three-dimensional finite element analysis", 대한치과교정학회지, 41(3), pp.191~199 (2011), 대한치과교정학회
- Chun YS, "A photoelastic study on the initial stress distribution by 3 types of molar uprighting spring", Korean J Orthod, 24, pp.709~719 (1994)
- Park CK, "A three-dimensional finite element analysis on the location of center of resistance during intrusion of upper anterior teeth", 27, pp.259~272
- 변나영, "교정용 미니임플랜트의 직경 및 식립각도에 따른 응력 분포에 관한 3차원 유한요소 분석", 대한치과교정학회지, 36(3), pp.178~187 (2006), 대한치과교정학회
- Koo BC, "An analysis of stress distribution in the case of unilateral molar expansion with precision lingual arch by finite element method", Korean J Orthod, 24, pp.721~733 (1994)