Influence of thickness and incisal extension of indirect veneers on the biomechanical behavior of maxillary canine teeth
1
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
Objectives: To analyze the influence of thickness and incisal extension of indirect veneers on the stress and strain generated in maxillary canine teeth. Materials and Methods: A 3-dimensional maxillary canine model was validated with an in vitro strain gauge and exported to computer-assisted engineering software. Materials were considered homogeneous, isotropic, and elastic. Each canine tooth was then subjected to a 0.3 and 0.8 mm reduction on the facial surface, in preparations with and without incisal covering, and restored with a lithium disilicate veneer. A 50 N load was applied at 45° to the long axis of the tooth, on the incisal third of the palatal surface of the crown. Results: The results showed a mean of 218.16 µstrain of stress in the in vitro experiment, and 210.63 µstrain in finite element analysis (FEA). The stress concentration on prepared teeth was higher at the palatal root surface, with a mean value of 11.02 MPa and varying less than 3% between the preparation designs. The veneers concentrated higher stresses at the incisal third of the facial surface, with a mean of 3.88 MPa and a 40% increase in less-thick veneers. The incisal cover generated a new stress concentration area, with values over 48.18 MPa. Conclusions: The mathematical model for a maxillary canine tooth was validated using FEA. The thickness (0.3 or 0.8 mm) and the incisal covering showed no difference for the tooth structure. However, the incisal covering was harmful for the veneer, of which the greatest thickness was beneficial.
Abstract
Objectives: To analyze the influence of thickness and incisal extension of indirect veneers on the stress and strain generated in maxillary canine teeth. Materials and Methods: A 3-dimensional maxillary canine model was validated with an in vitro strain gauge and exported to computer-assisted engineering software. Materials were considered homogeneous, isotropic, and elastic. Each canine tooth was then subjected to a 0.3 and 0.8 mm reduction on the facial surface, in preparations with and without incisal covering, and restored with a lithium disilicate veneer. A 50 N load was applied at 45° to the long axis of the tooth, on the incisal third of the palatal surface of the crown. Results: The results showed a mean of 218.16 µstrain of stress in the in vitro experiment, and 210.63 µstrain in finite element analysis (FEA). The stress concentration on prepared teeth was higher at the palatal root surface, with a mean value of 11.02 MPa and varying less than 3% between the preparation designs. The veneers concentrated higher stresses at the incisal third of the facial surface, with a mean of 3.88 MPa and a 40% increase in less-thick veneers. The incisal cover generated a new stress concentration area, with values over 48.18 MPa. Conclusions: The mathematical model for a maxillary canine tooth was validated using FEA. The thickness (0.3 or 0.8 mm) and the incisal covering showed no difference for the tooth structure. However, the incisal covering was harmful for the veneer, of which the greatest thickness was beneficial.
참고문헌 (38)
- Schmidt KK, "Influence of preparation design and existing condition of tooth structure on load to failure of ceramic laminate veneers", J Prosthet Dent, 105, pp.374~382 (2011)
- Korkut B, "Direct composite laminate veneers : three case reports", J Dent Res Dent Clin Dent Prospect, 7, pp.105~111 (2013)
- Re D, "Esthetic rehabilitation of anterior teeth with laminates composite veneers", Case Rep Dent, 2014, pp.849273~ (2014)
- Magne P, "The case for moderate “guided prep” indirect porcelain veneers in the anterior dentition. The pendulum of porcelain veneer preparations: from almost no-prep to over-prep to no-prep", Eur J Esthet Dent, 8, pp.376~388 (2013)
- Schmitz JH, "Monolithic lithium disilicate complete single crowns with feather-edge preparation design in the posterior region : a multicentric retrospective study up to 12 years", Quintessence Int, 20, pp.601~608 (2017)
- Edelhoff D, "Tooth structure removal associated with various preparation designs for anterior teeth", J Prosthet Dent, 87, pp.503~509 (2002)
- Oztürk E, "Survival of porcelain laminate veneers with different degrees of dentin exposure : 2-year clinical results", J Adhes Dent, 16, pp.481~489 (2014)
- Stappert CF, "Longevity and failure load of ceramic veneers with different preparation designs after exposure to masticatory simulation", J Prosthet Dent, 94, pp.132~139 (2005)
- Andreasen FM, "Reinforcement of bonded crown fractured incisors with porcelain veneers", Endod Dent Traumatol, 7, pp.78~83 (1991)
- Spitznagel FA, "CAD", CAM ceramic restorative materials for natural teeth, 2018, pp.97, 1082~1091
- Lien W, "Microstructural evolution and physical behavior of a lithium disilicate glass-ceramic", Dent Mater, 31, pp.928~940 (2015)
- Alkadi L, "Fracture toughness of two lithium disilicate dental glass ceramics", J Prosthet Dent, 116, pp.591~596 (2016)
- De Araujo EM Jr, "Closure of diastema and gingival recontouring using direct adhesive restorations : a case report", J Esthet Restor Dent, 21, pp.229~240 (2009)
- Haralur SB., "Microleakage of porcelain laminate veneers cemented with different bonding techniques", J Clin Exp Dent, 10, pp.e166~e171 (2018)
- Pini NP, "Advances in dental veneers: materials, applications, and techniques", Clin Cosmet Investig Dent, 4, pp.9~16 (2012)
- Dal Piva AMO, "CAD-FEA modeling and analysis of different full crown monolithic restorations", Dent Mater, 34, pp.1342~1350 (2018)
- Tribst JPM, "Endocrown restorations : influence of dental remnant and restorative material on stress distribution", Dent Mater, 34, pp.1466~1473 (2015)
- Zarone F, "Influence of tooth preparation design on the stress distribution in maxillary central incisors restored by means of alumina porcelain veneers : a 3D-finite element analysis", Dent Mater, 21, pp.1178~1188 (2005)
- Chaiyabutr Y, "Comparison of load-fatigue testing of ceramic veneers with two different preparation designs", Int J Prosthodont, 22, pp.573~575 (2009)
- Guess PC, "Midterm results of a 5-year prospective clinical investigation of extended ceramic veneers", Dent Mater, 24, pp.804~813 (2008)
- Tribst JPM, "Validation of a simplified implant-retained cantilever fixed prosthesis", Implant Dent, 27, pp.49~55 (2018)
- Tribst JP, "The importance of correct implants positioning and masticatory load direction on a fixed prosthesis", J Clin Exp Dent, 10, pp.e81~e87 (2018)
- Datte CE, "Influence of different restorative materials on the stress distribution in dental implants", J Clin Exp Dent, 10, pp.e439~e444 (2018)
- Tribst JPM, "Influence of implantoplasty on stress distribution of exposed implants at different bone insertion levels", Braz Oral Res, 31, pp.e96~ (2017)
- Monteiro JB, "The effect of resection angle on stress distribution after root-end surgery", Iran Endod J, 13, pp.188~194 (2018)
- Souza AC, "Effect of base and inlay restorative material on the stress distribution and fracture resistance of weakened premolars", Oper Dent, 40, pp.E158~E166 (2015)
- Eser A, "Nonlinear finite element analysis versus ex vivo strain gauge measurements on immediately loaded implants", Int J Oral Maxillofac Implants, 24, pp.439~446 (2009)
- Kheiralla LS, "Peri-implant biomechanical responses to standard, short-wide, and mini implants supporting single crowns under axial and off-axial loading (an in vitro study)", J Oral Implantol, 40, pp.42~52 (2014)
- Bicalho AA, "Incremental filling technique and composite material--part II: shrinkage and shrinkage stresses", Oper Dent, 39, pp.E83~E92 (2014)
- Chang Y, "Finite element analysis of dental implants with validation : to what extent can we expect the model to predict biological phenomena? A literature review and proposal for classification of a validation process", Int J Implant Dent, 4, pp.7~ (2018)
- Richter WA, "Relationship of crown margin placement to gingival inflammation", J Prosthet Dent, 30, pp.156~161 (1973)
- Hui KK, "A comparative assessment of the strengths of porcelain veneers for incisor teeth dependent on their design characteristics", Br Dent J, 171, pp.51~55 (1991)
- Highton R, "A photoelastic study of stresses on porcelain laminate preparations", J Prosthet Dent, 58, pp.157~161 (1987)
- Meijering AC, "Survival of three types of veneer restorations in a clinical trial: a 2.5-year interim evaluation", J Dent, 26, pp.563~568 (1998)
- Ge C, "Effect of porcelain and enamel thickness on porcelain veneer failure loads in vitro", J Prosthet Dent, 111, pp.380~387 (2014)
- Kelly JR, "Clinically relevant approach to failure testing of all-ceramic restorations", J Prosthet Dent, 81, pp.652~661 (1999)
- De Boever JA, "Functional occlusal forces : an investigation by telemetry", J Prosthet Dent, 40, pp.326~333 (1978)
- Gibbs CH, "Limits of human bite strength", J Prosthet Dent, 56, pp.226~229 (1986)