본문 바로가기
KERD
논문KCI 등재

Bond strength of orthodontic brackets bonded to enamel with a self-etching primer after bleaching and desensitizer application

2

조회

0

다운로드

0

인용

0

참고문헌

키워드

주제분류치의학

초록

Objective: The aim of this study was to compare the shear bond strengths (SBS) of orthodontic brackets bonded to enamel with a self-etching primer after bleaching, desensitizer application and combined treatment. Methods: Forty-eight premolars were randomly divided into four groups, each with n = 12 premolar samples. The four groups were; Group1: 15% hydrogen-peroxide office bleaching agent (Illuminé Office-IO), Group 2: IO + BisBlock Oxalate Dentin-Desensitizer, Group 3: Bis Block Oxalate Dentin-Desensitizer, Group 4: No treatment (control). Twenty-four hours after bonding, the specimens were tested in SBS at a crosshead speed of 5 mm/min until the brackets debonded. The failure mode of the brackets was determined by a modified adhesive remnant index. Results: Bleaching, bleaching and desensitizer treatment, and desensitizer treatment alone all significantly reduced SBS of the orthodontic brackets (p = 0.001). No statistically significant difference was found between Group 1, Group 2 and Group 3 (Group 1-Group 2, p = 0.564; Group 1-Group 3, p = 0.371; Group 2-Group 3, p = 0.133). The predominant mode of failure for the treatment groups (Group1, Group 2 and Group 3) was at the enamel-adhesive interface leaving 100% of the adhesive on the bracket base. Conclusions: Bleaching and desensitizer treatment should be delayed until the completion of orthodontic treatment. (Korean J Orthod 2010;40(5): 342-348)

Abstract

Objective: The aim of this study was to compare the shear bond strengths (SBS) of orthodontic brackets bonded to enamel with a self-etching primer after bleaching, desensitizer application and combined treatment. Methods: Forty-eight premolars were randomly divided into four groups, each with n = 12 premolar samples. The four groups were; Group1: 15% hydrogen-peroxide office bleaching agent (Illuminé Office-IO), Group 2: IO + BisBlock Oxalate Dentin-Desensitizer, Group 3: Bis Block Oxalate Dentin-Desensitizer, Group 4: No treatment (control). Twenty-four hours after bonding, the specimens were tested in SBS at a crosshead speed of 5 mm/min until the brackets debonded. The failure mode of the brackets was determined by a modified adhesive remnant index. Results: Bleaching, bleaching and desensitizer treatment, and desensitizer treatment alone all significantly reduced SBS of the orthodontic brackets (p = 0.001). No statistically significant difference was found between Group 1, Group 2 and Group 3 (Group 1-Group 2, p = 0.564; Group 1-Group 3, p = 0.371; Group 2-Group 3, p = 0.133). The predominant mode of failure for the treatment groups (Group1, Group 2 and Group 3) was at the enamel-adhesive interface leaving 100% of the adhesive on the bracket base. Conclusions: Bleaching and desensitizer treatment should be delayed until the completion of orthodontic treatment. (Korean J Orthod 2010;40(5): 342-348)

참고문헌 (36)

  1. Shinohara MS, "Pimenta LA, Ambrosano GM. The effect of nonvital bleaching on the shear bond strength of composite resin using three adhesive systems", J Adhes Dent, 6, pp.205~9 (2004)
  2. Unlu N, "Effect of elapsed time following bleaching on the shear bond strength of composite resin to enamel", J Biomed Mater Res B Appl Biomater, 84, pp.363~8 (2008)
  3. Marshall MV, "Hydrogen peroxide: a review of its use in dentistry", J Periodontol, 66, pp.786~96 (1995)
  4. Leonard RH Jr, "Change in pH of plaque and 10% carbamide peroxide solution during nightguard vital bleaching treatment", Quintessence Int, 25, pp.819~23 (1994)
  5. Josey AL, "The effect of a vital bleaching technique on enamel surface morphology and the bonding of composite resin to enamel", J Oral Rehabil, 23, pp.244~50 (1996)
  6. Gürgan S, "In vitro adherence of bacteria to bleached or unbleached enamel surfaces", J Oral Rehabil, 24, pp.624~7 (1997)
  7. Canay S, "The effect of current bleaching agents on the color of light-polymerized composites in vitro", J Prosthet Dent, 89, pp.474~8 (2003)
  8. Crim GA, "Post-operative bleaching: effect on microleakage", Am J Dent, 5, pp.109~12 (1992)
  9. Perdigão J, "Ultra-morphological study of the interaction of dental adhesives with carbamide peroxide-bleached enamel", Am J Dent, 11, pp.291~301 (1998)
  10. Holland GR, "Orchardson R. Guidelines for the design and conduct of clinical trials on dentine hypersensitivity", J Clin Perokontol, 24, pp.808~13 (1997)
  11. Walters PA, "Dentinal hypersensitivity: a review", J Contemp Dent Pract, 6, pp.107~17 (2005)
  12. Türkkahraman H, "Effects of potassium nitrate and oxalate desensitizer agents on shear bond strengths of orthodontic brackets", Angle Orthod, 77, pp.1096~100 (2007)
  13. Watanabe I, "Bonding to ground dentin by a phenyl-P self-etching primer", J Dent Res, 73, pp.1212~20 (1994)
  14. Frankenberger R, "No-bottle vs multi-bottle dentin adhesives--a microtensile bond strength and morphological study", Dent Mater, 17, pp.373~80 (2001)
  15. Van Meerbeek B, "Buonocore memorial lecture. Adhesion to enamel and dentin: current status and future challenges", Oper Dent, 28, pp.215~35 (2003)
  16. Perdigão J, "Total-etch versus self-etch adhesive: effect on postoperative sensitivity", J Am Dent Assoc, 134, pp.1621~9 (2003)
  17. Attar N, "Effect of two light-emitting diode (LED) and one halogen curing light on the microleakage of Class V flowable composite restorations", J Contemp Dent Pract, 8, pp.80~8 (2007)
  18. Gokcelik A, "The influence of Er:YAG laser conditioning versus", Photomed Laser Surg, 25, pp.508~12 (2007)
  19. Miller RA, "Laboratory and clinical evaluation of a self-etching primer", J Clin Orthod, 35, pp.42~5 (2001)
  20. Oliver RG, "The effect of different methods of bracket removal on the amount of residual adhesive", Am J Orthod Dentofacial Orthop, 93, pp.196~200 (1988)
  21. Lai SC, "Reversal of compromised bonding in bleached enamel", J Dent Res, 81, pp.477~81 (2002)
  22. Lai SC, "Reversal of compromised bonding to oxidized etched dentin", J Dent Res, 80, pp.1919~24 (2001)
  23. Titley KC, "Adhesion of composite resin to bleached and unbleached bovine enamel", J Dent Res, 67, pp.1523~8 (1988)
  24. Türkkahraman H, "Bleaching and desensitizer application effects on shear bond strengths of orthodontic brackets", Angle Orthod, 77, pp.489~93 (2007)
  25. Uysal T, "Can previously bleached teeth be bonded safely using self-etching primer systems?", Angle Orthod, 78, pp.711~5 (2008)
  26. Uysal T, "Can previously bleached teeth be bonded safely?", Am J Orthod Dentofacial Orthop, 123, pp.628~32 (2003)
  27. Eminkahyagil N, "Shear bond strength of orthodontic brackets with newly developed antibacterial self etch adhesive", Angle Orthod, 75, pp.843~8 (2005)
  28. Cavalli V, "The effect of elapsed time following bleaching on enamel bond strength of resin composite", Oper Dent, 26, pp.597~602 (2001)
  29. Sung EC, "Effect of carbamide peroxide bleaching on the shear bond strength of composite to dental bonding agent enhanced enamel", J Prosthet Dent, 82, pp.595~9 (1999)
  30. Aranha AC, "Microtensile bond strengths of composite to dentin treated with desensitizer products", J Adhes Dent, 8, pp.85~90 (2006)
  31. Pashley DH, "Dentin permeability, dentin sensitivity, and treatment through tubule occlusion", J Endod, 12, pp.465~74 (1986)
  32. Camps J, "In vivo sensitivity of human root dentin to air blast and scratching", J Periodontol, 74, pp.1589~94 (2003)
  33. Gillam DG, "The effects of oxalate-containing products on the exposed dentine surface: an SEM investigation", J Oral Rehabil, 28, pp.1037~44 (2001)
  34. Gillam DG, "Scanning electron microscopy (SEM) investigation of selected desensitizing agents in the dentine disc model", Endod Dent Traumatol, 15, pp.198~204 (1999)
  35. Tay FR, "Integrating oxalate desensitizers with total-etch two-step adhesive", J Dent Res, 82, pp.703~7 (2003)
  36. Reynolds IR, "A review of direct orthodontic bonding", Br J Orthod, 2, pp.171~8 (1975)

관련 논문AI추천

Does the time interval after bleaching influence the adhesion of orthodontic brackets?Cecy Martins Silva, Cyndi Albuquerque de Miranda, Glaucia Cristina Rodrigues Nascimento, Gustavo Antonio Martins Brandão, Haroldo Amorim de Almeida, Sissy Maria Mendes Machado대한치과교정학회 · 대한치과교정학회지2013 · 제43권 제5호Orthodontic bonding to acid- or laser-etched prebleached enamelDerya Germec Cakan, Fulya Ozdemir, Nese Gonul, Umut Cakan대한치과교정학회 · 대한치과교정학회지2013 · 제43권 제3호Analysis of Enamel Surface and Shear Bond Strength with Orthodontic Bracket at Different Time Intervals After Bleaching TreatmentHong Ji-Yeon, Ku Hye-Min, Lee Yu-Jin, Yang Song-Yi한국치위생과학회 · 치위생과학회지2025 · 제25권 제2호Effects of a new desensitizing paste containing 8% arginine and calcium carbonate on the shear bond strength of orthodontic bracketsAhmet Yagci, Banu Uysal, Hatice Akinci, Tancan Uysal대한치과교정학회 · 대한치과교정학회지2011 · 제41권 제2호Effects of conventional and self-etching adhesive systems on bond strength of orthodontic attachments bonded to erupted and unerupted teethCemal Yesilyurt, Mehmet Bayram, Metin Nur, Tancan Uysal대한치과교정학회 · 대한치과교정학회지2010 · 제40권 제4호Evaluation of different enamel conditioning techniques for orthodontic bondingÇagrı Türköz, Çagrı Ulusoy대한치과교정학회 · 대한치과교정학회지2012 · 제42권 제1호

이 간행물의 다른 논문 (6건)