Orthodontic bonding to acid- or laser-etched prebleached enamel
2
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
Objective: Bonding forces of brackets to enamel surfaces may be affected by the procedures used for bleaching and enamel etching. The aim of this study was to investigate the bonding strength of orthodontic brackets to laser-etched surfaces of bleached teeth. Methods: In a nonbleached control group, acid etching (group A) or Er:YAG laser application (group B) was performed prior to bracket bonding (n = 13 in each group). Similar surface treatments were performed at 1 day (groups C and D; n = 13 in each subgroup) or at 3 weeks (groups E and F; n = 13 in each subgroup) after 38% hydrogen peroxide bleaching in another set of teeth. The specimens were debonded after thermocycling. Results: Laser etching of bleached teeth resulted in clinically unacceptable low bonding strength. In the case of acid-etched teeth, waiting for 3 weeks before attachment of brackets to the bleached surfaces resulted in similar, but not identical, bond strength values as those obtained with nonbleached surfaces. However, in the laser-etched groups, the bonding strength after 3 weeks was the same as that for the nonbleached group. Conclusions: When teeth bleached with 38% hydrogen peroxide are meant to be bonded immediately, acid etching is preferable.
Abstract
Objective: Bonding forces of brackets to enamel surfaces may be affected by the procedures used for bleaching and enamel etching. The aim of this study was to investigate the bonding strength of orthodontic brackets to laser-etched surfaces of bleached teeth. Methods: In a nonbleached control group, acid etching (group A) or Er:YAG laser application (group B) was performed prior to bracket bonding (n = 13 in each group). Similar surface treatments were performed at 1 day (groups C and D; n = 13 in each subgroup) or at 3 weeks (groups E and F; n = 13 in each subgroup) after 38% hydrogen peroxide bleaching in another set of teeth. The specimens were debonded after thermocycling. Results: Laser etching of bleached teeth resulted in clinically unacceptable low bonding strength. In the case of acid-etched teeth, waiting for 3 weeks before attachment of brackets to the bleached surfaces resulted in similar, but not identical, bond strength values as those obtained with nonbleached surfaces. However, in the laser-etched groups, the bonding strength after 3 weeks was the same as that for the nonbleached group. Conclusions: When teeth bleached with 38% hydrogen peroxide are meant to be bonded immediately, acid etching is preferable.
참고문헌 (32)
- Titley K, "Effect of concentrated hydrogen peroxide solution on the surface morphology of cut human dentin", Endod Dent Traumatol, 4, pp.32~36 (1988)
- Cavalli V, "High-concentrated carbamide peroxide bleaching agents effects on enamel surface", J Oral Rehabil, 31, pp.155~159 (2004)
- Patusco VC, "Bond strength of metallic brackets after dental bleaching", Angle Orthod, 79, pp.122~126 (2009)
- McCracken MS, "Demineralization effects of 10 percent carbamide peroxide", J Dent, 24, pp.395~398 (1996)
- Hegedüs C, "An atomic force microscopy study on the effect of bleaching agents on enamel surface", J Dent, 27, pp.509~515 (1999)
- Rueggeberg FA, "The effect of oxygen inhibition on an unfilled", filled composite system, 1990, pp.69, 1652~1658
- Kalili T, "In vitro toothbrush abrasion and bond strength of bleached enamel", Pract Periodontics Aesthet Dent, 3, pp.22~24 (1991)
- Titley KC, "Scanning electron microscopy observations on the penetration and structure of resin tags in bleached and unbleached bovine enamel", J Endod, 17, pp.72~75 (1991)
- Dishman MV, "The effects of peroxide bleaching on composite to enamel bond strength", Dent Mater, 10, pp.33~36 (1994)
- Cvitko E, "Bond strength of composite resin to enamel bleached with carbamide peroxide", J Esthet Dent, 3, pp.100~102 (1991)
- Uysal T, "Can previously bleached teeth be bonded safely using self-etching primer systems?", Angle Orthod, 78, pp.711~715 (2008)
- Bulut H, "Tensile bond strength of brackets after antioxidant treatment on bleached teeth", Eur J Orthod, 27, pp.466~471 (2005)
- Sung EC, "Effect of carbamide peroxide bleaching on the shear bond strength of composite to dental bonding agent enhanced enamel", J Prosthet Dent, 82, pp.595~599 (1999)
- Barghi N, "Reducing the adverse effect of bleaching on composite-enamel bond", J Esthet Dent, 6, pp.157~161 (1994)
- Lee BS, "Bond strengths of orthodontic bracket after acid-etched, Er:YAG laser-irradiated and combined treatment on enamel surface", Angle Orthod, 73, pp.565~570 (2003)
- Gokcelik A, "The influence of Er:YAG laser conditioning versus self-etching adhesives with acid etching on the shear bond strength of orthodontic brackets", Photomed Laser Surg, 25, pp.508~512 (2007)
- Berk N, "Comparison of sandblasting, laser irradiation, and conventional acid etching for orthodontic bonding of molar tubes", Eur J Orthod, 30, pp.183~189 (2008)
- von Fraunhofer JA, "Laser etching of enamel for direct bonding", Angle Orthod, 63, pp.73~76 (1993)
- Martínez-Insua A, "Differences in bonding to acidetched or Er:YAG-laser-treated enamel and dentin surfaces", J Prosthet Dent, 84, pp.280~288 (2000)
- Uşümez S, "Laser etching of enamel for direct bonding with an Er,Cr:YSGG hydrokinetic laser system", Am J Orthod Dentofacial Orthop, 122, pp.649~656 (2002)
- Mullins JM, "Tooth whitening effects on bracket bond strength in vivo", Angle Orthod, 79, pp.777~783 (2009)
- Torneck CD, "The influence of time of hydrogen peroxide exposure on the adhesion of composite resin to bleached bovine enamel", J Endod, 16, pp.123~128 (1990)
- Titley KC, "Adhesion of a resin composite to bleached and unbleached human enamel", J Endod, 19, pp.112~115 (1993)
- Cavalli V, "The effect of elapsed time following bleaching on enamel bond strength of resin composite", Oper Dent, 26, pp.597~602 (2001)
- Türkkahraman H, "Bleaching and desensitizer application effects on shear bond strengths of orthodontic brackets", Angle Orthod, 77, pp.489~493 (2007)
- Abe R, "Effects of tooth bleaching on shear bond strength of brackets rebonded with a self-etching adhesive system", Odontology, 99, pp.83~87 (2011)
- Uysal T, "Can previously bleached teeth be bonded safely?", Am J Orthod Dentofacial Orthop, 123, pp.628~632 (2003)
- Cecchini RC, "Effect of Er:YAG laser on enamel acid resistance: morphological and atomic spectrometry analysis", Lasers Surg Med, 37, pp.366~372 (2005)
- Basaran G, "Etching enamel for orthodontics with an erbium, chromium: yttrium-scandium-gallium-garnet laser system", Angle Orthod, 77, pp.117~123 (2007)
- Ozer T, "Laser etching of enamel for orthodontic bonding", Am J Orthod Dentofacial Orthop, 134, pp.193~197 (2008)
- Bishara SE, "Shear bond strength of composite, glass ionomer, and acidic primer adhesive systems", Am J Orthod Dentofacial Orthop, 115, pp.24~28 (1999)
- Maijer R, "A new surface treatment for bonding", J Biomed Mater Res, 13, pp.975~985 (1979)