In vitro physical, chemical, and biological evaluation of commercially available metal orthodontic brackets
2
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
Objective: This in vitro study was undertaken to evaluate the physical, chemical, and biological properties of commercially available metal orthodontic brackets in South Korea, because national standards for these products are lacking. Methods: Four bracket brands were tested for dimensional accuracy, (manufacturing errors in angulation and torque), cytotoxicity, composition, elution, and corrosion: Archist (Daeseung Medical), Victory (3M Unitek), Kosaka (Tomy), and Confidence (Shinye Odontology Materials). Results: The tested rackets showed no significant differences in manufacturing errors in angulation, but Confidence brackets showed a significant difference in manufacturing errors in torque. None of the brackets were cytotoxic to mouse fibroblasts. The metal ion components did not show a regular increasing or decreasing trend of elution over time, but the volume of the total eluted metal ions increased: Archist brackets had the maximal Cr elution and Confidence brackets appeared to have the largest volume of total eluted metal ions because of excessive Ni elution. Confidence brackets showed the lowest corrosion resistance during potentiodynamic polarization. Conclusions: The results of this study could potentially be applied in establishing national standards for metal orthodontic brackets and in evaluating commercially available products.
Abstract
Objective: This in vitro study was undertaken to evaluate the physical, chemical, and biological properties of commercially available metal orthodontic brackets in South Korea, because national standards for these products are lacking. Methods: Four bracket brands were tested for dimensional accuracy, (manufacturing errors in angulation and torque), cytotoxicity, composition, elution, and corrosion: Archist (Daeseung Medical), Victory (3M Unitek), Kosaka (Tomy), and Confidence (Shinye Odontology Materials). Results: The tested rackets showed no significant differences in manufacturing errors in angulation, but Confidence brackets showed a significant difference in manufacturing errors in torque. None of the brackets were cytotoxic to mouse fibroblasts. The metal ion components did not show a regular increasing or decreasing trend of elution over time, but the volume of the total eluted metal ions increased: Archist brackets had the maximal Cr elution and Confidence brackets appeared to have the largest volume of total eluted metal ions because of excessive Ni elution. Confidence brackets showed the lowest corrosion resistance during potentiodynamic polarization. Conclusions: The results of this study could potentially be applied in establishing national standards for metal orthodontic brackets and in evaluating commercially available products.
참고문헌 (30)
- Creekmore TD, "Straight wire: the next generation", Am J Orthod Dentofacial Orthop, 104, pp.8~20 (1993)
- Ødegaard J, "Shear bond strength of metal brackets compared with a new ceramic bracket", Am J Orthod Dentofacial Orthop, 94, pp.201~206 (1988)
- Feldner JC, "In vitro torque-deformation characteristics of orthodontic polycarbonate brackets", Am J Orthod Dentofacial Orthop, 106, pp.265~272 (1994)
- Cacciafesta V, "Evaluation of friction of conventional and metal-insert ceramic brackets in various bracketarchwire combinations", Am J Orthod Dentofacial Orthop, 124, pp.403~409 (2003)
- Kapur Wadhwa R, "Frictional resistance in ceramic and metal brackets", J Clin Orthod, 38, pp.35~38 (2004)
- Kim JH, "Discoloration and corrosion resistance of Tin-coated orthodontic appliances produced by Ion-plating method", Korean J Orthod, 23, pp.327~340 (1993)
- Maijer R, "Biodegradation of the orthodontic bracket system", Am J Orthod Dentofacial Orthop, 90, pp.195~198 (1986)
- Toms AP, "The corrosion of orthodontic wire", Eur J Orthod, 10, pp.87~97 (1988)
- House K, "Corrosion of orthodontic appliances-should we care?", Am J Orthod Dentofacial Orthop, 133, pp.584~592 (2008)
- Park HY, "In vitro release of nickel and chromium from simulated orthodontic appliances", Am J Orthod, 84, pp.156~159 (1983)
- Lim YK, "An experimental study on the cytotoxicity of orthodontic wires", Korean J Orthod, 26, pp.591~599 (1996)
- 이계형, "전기도금한 교정용 스테인레스스틸 선재의 세포독성에 관한 연구", 대한치과교정학회지, 35(2), pp.127~136 (2005), 대한치과교정학회
- Ceen RF, "Indelible iatrogenic staining of enamel following debonding: a case report", J Clin Orthod, 14, pp.713~715 (1980)
- Maijer R, "Corrosion of orthodontic bracket bases", Am J Orthod, 81, pp.43~48 (1982)
- Kim MS, "A study on metal release of tin ion-plated stainless steel orthodontic appliances", Korean J Orthod, 25, pp.43~54 (1995)
- International Organization for Standardization, "Dentistry: brackets and tubes for use in orthodontics", ISO 27020, ~ (2010)
- International Organization for Standardization, "Biological evaluation of medical devices. Part 5: Test for in vitro cytotoxicity", ISO 10993-5, ~ (2009)
- International Organization for Standardization, "Dental metallic materials: corrosion test methods", ISO 10271, ~ (2011)
- 김광만, "A stainless steel bracket for orthodontic application", EUROPEAN JOURNAL OF ORTHODONTICS, 27(3), pp.237~244
- Kao CT, "The cytotoxicity of orthodontic metal bracket immersion media", Eur J Orthod, 29, pp.198~203 (2007)
- Yoo DH, "An experimental study on the cytotoxicity of various orthodontic bands", Korean J Orthod, 24, pp.419~432 (1994)
- Lim YK, "An experimental study on the cytotoxicity of recycled brackets", Korean J Orthod, 23, pp.147~163 (1993)
- Oh KT, "Ion release and cytotoxicity of stainless steel wires", Eur J Orthod, 27, pp.533~540 (2005)
- Freitas MP, "Cytotoxicity of silver solder employed in orthodontics", Angle Orthod, 79, pp.939~944 (2009)
- Eliades T, "In vivo aging of orthodontic alloys: implications for corrosion potential, nickel release, and biocompatibility", Angle Orthod, 72, pp.222~237 (2002)
- Staerkjaer L, "Nickel allergy and orthodontic treatment", Eur J Orthod, 12, pp.284~289 (1990)
- Sfondrini MF, "Nickel release from new conventional stainless steel, recycled, and nickel-free orthodontic brackets: an in vitro study", Am J Orthod Dentofacial Orthop, 137, pp.809~815 (2010)
- Choi CM, "The effects of heat treatment on mechanical properties and metal release from heattreated orthodontic archwires", Korean J Orthod, 20, pp.381~390 (1990)
- Grimsdottir MR, "Composition and in vitro corrosion of orthodontic appliances", Am J Orthod Dentofacial Orthop, 101, pp.525~532 (1992)
- National Research Council, "Dietary reference intakes: the essential guide to nutrient requirements" (2006), The National Academies Press