Force changes associated with differential activation of en-masse retraction and/or intrusion with clear aligners
2
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
Objective: To investigate the three-dimensional forces created by clear aligners on mandibular teeth during differential activation with en-masse retraction and/or intrusion in vitro. Methods: Six sets of clear aligners were designed for differential en-masse retraction and/or intrusion procedures in a first premolar extraction model. Group A0 was a control group with no activation. Groups A1–5 underwent different degrees of retractions and/or intrusions. Each group consisted of 10 aligners. Aligner forces were measured on a multi-axis force/torque transducer measurement system in real-time. Results: In the en-masse retraction groups (A1 and A2), lingual and extrusive forces were observed on the incisors; the canines mainly received distal forces; intrusive forces were seen on the second premolars; and the molars received mesial forces. In the en-masse retraction and intrusion groups (A3, A4, and A5), incisors also received lingual and extrusive forces; canines received distal and intrusive forces; mesial and extrusive forces were seen on the second premolars; and the second molars received distal and intrusive forces. The vertical forces on the incisors did not differ significantly among groups A1, A3, and A5. However, the vertical forces on the second premolars reversed from intrusion in group A1 to extrusion in groups A3 and A5. Conclusions: With clear aligners, the “bowing effect” is seen during en-masse anterior teeth retraction and can be partially relieved by performing en-masse retraction accompanied by anterior teeth intrusion. Vertical control of incisors remained unsolved during en-masse retraction, even when intrusive activation was added to the anterior teeth.
Abstract
Objective: To investigate the three-dimensional forces created by clear aligners on mandibular teeth during differential activation with en-masse retraction and/or intrusion in vitro. Methods: Six sets of clear aligners were designed for differential en-masse retraction and/or intrusion procedures in a first premolar extraction model. Group A0 was a control group with no activation. Groups A1–5 underwent different degrees of retractions and/or intrusions. Each group consisted of 10 aligners. Aligner forces were measured on a multi-axis force/torque transducer measurement system in real-time. Results: In the en-masse retraction groups (A1 and A2), lingual and extrusive forces were observed on the incisors; the canines mainly received distal forces; intrusive forces were seen on the second premolars; and the molars received mesial forces. In the en-masse retraction and intrusion groups (A3, A4, and A5), incisors also received lingual and extrusive forces; canines received distal and intrusive forces; mesial and extrusive forces were seen on the second premolars; and the second molars received distal and intrusive forces. The vertical forces on the incisors did not differ significantly among groups A1, A3, and A5. However, the vertical forces on the second premolars reversed from intrusion in group A1 to extrusion in groups A3 and A5. Conclusions: With clear aligners, the “bowing effect” is seen during en-masse anterior teeth retraction and can be partially relieved by performing en-masse retraction accompanied by anterior teeth intrusion. Vertical control of incisors remained unsolved during en-masse retraction, even when intrusive activation was added to the anterior teeth.
참고문헌 (32)
- Turpin DL, "Clinical trials needed to answer questions about Invisalign", Am J Orthod Dentofacial Orthop, 127, pp.157~158 (2005)
- Shin K, "The Invisalign appliance could be an effective modality for treating overbite malocclusions within a mild to moderate range", J Evid Based Dent Pract, 17, pp.278~280 (2017)
- Bowman SJ, "Creative adjuncts for clear aligners, part 2 : intrusion, rotation, and extrusion", J Clin Orthod, 49, pp.162~172 (2015)
- Khosravi R, "Management of overbite with the Invisalign appliance", Am J Orthod Dentofacial Orthop, 151, pp.691~699.e2 (2017)
- Bowman SJ, "Creative adjuncts for clear aligners, part 1 : class II treatment", J Clin Orthod, 49, pp.83~94 (2015)
- Houle JP, "The predictability of transverse changes with Invisalign", Angle Orthod, 87, pp.19~24 (2017)
- Bowman SJ, "Creative adjuncts for clear aligners, part 3 : extraction and interdisciplinary treatment", J Clin Orthod, 49, pp.249~262 (2015)
- Womack WR, "Four-premolar extraction treatment with Invisalign", J Clin Orthod, 40, pp.493~500 (2006)
- Baldwin DK, "Activation time and material stiffness of sequential removable orthodontic appliances. Part 3:premolar extraction patients", Am J Orthod Dentofacial Orthop, 133, pp.837~845 (2008)
- Giancotti A, "Extraction treatment using Invisalign Technique", Prog Orthod, 7, pp.32~43 (2006)
- Ojima K, "Accelerated extraction treatment with Invisalign", J Clin Orthod, 48, pp.487~499 (2014)
- Liu D, "Different sliding mechanics in space closure of lingual orthodontics : a translational study by threedimensional finite element method", Am J Transl Res, 11, pp.120~130 (2019)
- Hahn W, "Influence of thermoplastic appliance thickness on the magnitude of force delivered to a maxillary central incisor during tipping", Am J Orthod Dentofacial Orthop, 136, pp.12.e1~7 (2009)
- Hahn W, "Torquing an upper central incisor with aligners--acting forces and biomechanical principles", Eur J Orthod, 32, pp.607~613 (2010)
- Kohda N, "Effects of mechanical properties of thermoplastic materials on the initial force of thermoplastic appliances", Angle Orthod, 83, pp.476~483 (2013)
- Simon M, "Forces and moments generated by removable thermoplastic aligners : incisor torque, premolar derotation, and molar distalization", Am J Orthod Dentofacial Orthop, 145, pp.728~736 (2014)
- Xiaowei Li, "Changes in force associated with the amount of aligner activation and lingual bodily movement of the maxillary central incisor", 대한치과교정학회지, 46(2), pp.65~72 (2016), 대한치과교정학회
- Liu Y, "Force changes associated with different intrusion strategies for deep-bite correction by clear aligners", Angle Orthod, 88, pp.771~778 (2018)
- Krieger E, "Accuracy of invisalign® treatments in the anterior tooth region. First results", J Orofac Orthop, 72, pp.141~149 (2011)
- Gu J, "Evaluation of Invisalign treatment effectiveness and efficiency compared with conventional fixed appliances using the Peer Assessment Rating index", Am J Orthod Dentofacial Orthop, 151, pp.259~266 (2017)
- Kravitz ND, "How well does Invisalign work? A prospective clinical study evaluating the efficacy of tooth movement with Invisalign", Am J Orthod Dentofacial Orthop, 135, pp.27~35 (2009)
- Li W, "The effectiveness of the Invisalign appliance in extraction cases using the the ABO model grading system : a multicenter randomized controlled trial", Int J Clin Exp Med, 8, pp.8276~8282 (2014)
- Bollen AM, "Activation time and material stiffness of sequential removable orthodontic appliances. Part 1: ability to complete treatment", Am J Orthod Dentofacial Orthop, 124, pp.496~501 (2003)
- Caputo AA, "Photoelastic visualization of orthodontic forces during canine retraction", Am J Orthod, 65, pp.250~259 (1974)
- Knop L, "Scientific use of the finite element method in orthodontics", Dental Press J Orthod, 20, pp.119~125 (2015)
- Barbagallo LJ, "A novel pressure film approach for determining the force imparted by clear removable thermoplastic appliances", Ann Biomed Eng, 36, pp.335~341 (2008)
- Vardimon AD, "In-vivo von Mises strains during Invisalign treatment", Am J Orthod Dentofacial Orthop, 138, pp.399~409 (2010)
- Badawi H, "Three-dimensional orthodontic force measurements", Am J Orthod Dentofacial Orthop, 137, pp.299~300 (2010)
- Ferguson JW, "Lower incisor torque : the effects of rectangular archwires with a reverse curve of Spee", Br J Orthod, 17, pp.311~315 (1990)
- Pandis N, "Effects of levelling of the curve of Spee on the proclination of mandibular incisors and expansion of dental arches : a prospective clinical trial", Aust Orthod J, 26, pp.61~65 (2010)
- Clements KM, "Activation time and material stiffness of sequential removable orthodontic appliances. Part 2: Dental improvements", Am J Orthod Dentofacial Orthop, 124, pp.502~508 (2003)
- Jacobson A, "Contemporary orthodontics", Am J Orthod Dentofacial Orthop, 117, pp.PA1~ (2000)