본문 바로가기
KERD
논문KCI 등재

Effect of tack cure time on polymerization shrinkage of dual-cure resin cement

0

조회

0

다운로드

0

인용

0

참고문헌

키워드

주제분류치의학

초록

When luting indirect restorations with dual-cure resin cement (DCRC), excess cement can be easily removed by performing tack cure of DCRC for a few seconds. The purpose of this study was to evaluate whether different tack cure times affect polymerization shrinkage (PS) of the selected DCRC. One dual-cure resin cement (G-CEM LinkAce, GC) was used for measuring PS in light-cure (LC group), self-cure (SC group), and two tack-cure modes. In the first tack-cure subgroup, tack cure was performed for 1, 2, 3, and 5 seconds, followed by light cure after 2 minutes of remnant removal time in each case (TC-LC groups). In the other tack-cure subgroup, tack cure was performed for the same lengths of time, but followed by self-cure in each case (TC-SC groups). PS was measured by a modified bonded disc method for 1,800 seconds. One-way analysis of variance followed by Duncan’s post hoc test was used to determine any statistically significant differences among the test groups (α = 0.05). When the DCRC was selfcured after tack cure, PS was significantly lower than when it was only self-cured (p < 0.05); however, tack cure time did not affect PS (p > 0.05). When the DCRC was light-cured, PS was not affected by tack cure or tack cure time (p > 0.05). Therefore, tack cure within 5 seconds did not negatively affect the final PS when the DCRC was light-cured after cement remnant removal.

Abstract

When luting indirect restorations with dual-cure resin cement (DCRC), excess cement can be easily removed by performing tack cure of DCRC for a few seconds. The purpose of this study was to evaluate whether different tack cure times affect polymerization shrinkage (PS) of the selected DCRC. One dual-cure resin cement (G-CEM LinkAce, GC) was used for measuring PS in light-cure (LC group), self-cure (SC group), and two tack-cure modes. In the first tack-cure subgroup, tack cure was performed for 1, 2, 3, and 5 seconds, followed by light cure after 2 minutes of remnant removal time in each case (TC-LC groups). In the other tack-cure subgroup, tack cure was performed for the same lengths of time, but followed by self-cure in each case (TC-SC groups). PS was measured by a modified bonded disc method for 1,800 seconds. One-way analysis of variance followed by Duncan’s post hoc test was used to determine any statistically significant differences among the test groups (α = 0.05). When the DCRC was selfcured after tack cure, PS was significantly lower than when it was only self-cured (p < 0.05); however, tack cure time did not affect PS (p > 0.05). When the DCRC was light-cured, PS was not affected by tack cure or tack cure time (p > 0.05). Therefore, tack cure within 5 seconds did not negatively affect the final PS when the DCRC was light-cured after cement remnant removal.

참고문헌 (21)

  1. Stegall D, "Does tack curing luting cements affect the final cure", J Adhes Dent, 19, pp.239~243 (2017)[DOI]
  2. Shim JS, "Polymerization mode of self-adhesive, dual-cured dental resin cements light cured through various restorative materials", J Esthet Restor Dent, 29, pp.209~214 (2017)[DOI]
  3. Linkevicius T, "Does residual cement around implant-supported restorations cause peri-implant disease? A retrospective case analysis", Clin Oral Implants Res, 24, pp.1179~1184 (2013)[DOI]
  4. Hayes A, "Effect of endocrown pulp chamber extension depth on molar fracture resistance", Oper Dent, 42, pp.327~334 (2017)[DOI]
  5. Kim YS, "Effect of tack cure on polymerization shrinkage of resin-based luting cements", Oper Dent, 45, pp.E196~206 (2020)[DOI]
  6. Tauböck TT, "Influence of light-curing protocols on polymerization shrinkage and shrinkage force of a dual-cured core build-up resin composite", Eur J Oral Sci, 118, pp.423~429 (2010)[DOI]
  7. Atlas AM, "Effect of delayed light polymerization of a dual-cured composite base on microleakage of Class 2 posterior composite opensandwich restorations", Quintessence Int, 40, pp.471~477 (2009)
  8. Moraes RR, "Impact of immediate and delayed light activation on self-polymerization of dual-cured dental resin luting agents", Acta Biomater, 5, pp.2095~2100 (2009)[DOI]
  9. Chen L, "Effects of light-, self-, and tack-curing on degree of conversion and physical strength of dual-cure resin cements", Am J Dent, 29, pp.67~70 (2016)
  10. Flury S, "The effect of polymerization procedure on Vickers hardness of dual-curing resin cements", Am J Dent, 24, pp.226~232 (2011)
  11. Lee IB, "Influence of ceramic thickness and curing mode on the polymerization shrinkage kinetics of dual-cured resin cements", Dent Mater, 24, pp.1141~1147 (2008)[DOI]
  12. Lee IB, "A new method to measure the polymerization shrinkage kinetics of light cured composites", J Oral Rehabil, 32, pp.304~314 (2005)[DOI]
  13. Braga RR, "Contraction stress related to degree of conversion and reaction kinetics", J Dent Res, 81, pp.114~118 (2002)[DOI]
  14. Yoshida K, "Influence of light-exposure methods and depths of cavity on the microhardness of dual-cured core build-up resin composites", J Appl Oral Sci, 22, pp.44~51 (2014)[DOI]
  15. Aguiar TR, "Influence of curing mode and time on degree of conversion of one conventional and two self-adhesive resin cements", Oper Dent, 35, pp.295~299 (2010)[DOI]
  16. Inokoshi M, "Influence of light irradiation through zirconia on the degree of conversion of composite cements", J Adhes Dent, 18, pp.161~171 (2016)[DOI]
  17. Kim AR, "Effect of activation modes on the compressive strength, diametral tensile strength and microhardness of dual-cured self-adhesive resin cements", Dent Mater J, 35, pp.298~308 (2016)[DOI]
  18. 염승현, "Effect of dentin pretreatment and curing mode on the microtensile bond strength of self-adhesive resin cements", The Journal of Advanced of Prosthodontics, 7(4), pp.317~322 (2015), 대한치과보철학회[DOI]
  19. Asmussen E, "Influence of pulse-delay curing on softening of polymer structures", J Dent Res, 80, pp.1570~1573 (2001)[DOI]
  20. Hofmann N, "The influence of plasma arc vs. halogen standard or soft-start irradiation on polymerization shrinkage kinetics of polymer matrix composites", J Dent, 31, pp.383~393 (2003)[DOI]
  21. Krejci I, "Resin composite shrinkage and marginal adaptation with different pulsedelay light curing protocols", Eur J Oral Sci, 113, pp.531~536 (2005)[DOI]

관련 논문AI추천

Comparison of polymerization shrinkage of dual-cure core build-up resin according to shade and curing mode장훈상, 최유리나, Karl Lee치의학연구원 · Oral Biology Research2019 · 제43권 제4호즉시 광중합과 지연 광중합이 이원 중합 레진시멘트의 중합 수축량에 미치는 영향김성훈, 김희경, 이소연, 최유성, 하승룡대한치과보철학회 · 대한치과보철학회지2014 · 제52권 제3호Effect of solution temperature on the mechanical properties of dual-cure resin cements강은숙, 권용훈, 윤미정, 전영찬, 정창모, 허중보대한치과보철학회 · The Journal of Advanced of Prosthodontics2013 · 제5권 제2호Effects of radiant exposure and wavelength spectrum of light-curing units on chemical and physical properties of resin cementsAdriano Fonseca Lima, Alan Rodrigo Muniz Palialol, Cintia Helena Coury Saraceni, Giselle Maria Marchi, Ligia Franca Aires Zambelli, Marcelo Tavares de Oliveira, Stephanie Ellen Ferreira Formaggio대한치과보존학회 · Restorative Dentistry and Endodontics2016 · 제41권 제4호The effect of thickness and translucency of polymer-infiltrated ceramic-network material on degree of conversion of resin cementsKubilay Barutcigil, Ulviye Şebnem Büyükkaplan대한치과보철학회 · The Journal of Advanced of Prosthodontics2020 · 제12권 제2호Curing efficiency of various resin-based materials polymerized through different ceramic thicknesses and curing time이정원, 이주희, 차현석대한치과보철학회 · The Journal of Advanced of Prosthodontics2011 · 제3권 제3호

이 간행물의 다른 논문 (7건)