Stress distribution of oval and circular fiber posts in amandibular premolar: a three-dimensional finite element analysis
2
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
PURPOSE. The aim of the present study was to evaluate the effects of posts with different morphologies on stress distribution in an endodontically treated mandibular premolar by using finite element models (FEMs). MATERIALS AND METHODS. A mandibular premolar was modeled using the ANSYS software program. Two models were created to represent circular and oval fiber posts in this tooth model. An oblique force of 300 N was applied at an angle of 45° to the occlusal plane and oriented toward the buccal side. von Mises stress was measured in three regions each for oval and circular fiber posts. RESULTS. FEM analysis showed that the von Mises stress of the circular fiber post (426.81 MPa) was greater than that of the oval fiber post (346.34 MPa). The maximum distribution of von Mises stress was in the luting agent in both groups. Additionally, von Mises stresses accumulated in the coronal third of root dentin, close to the post space in both groups. CONCLUSION. Oval fiber posts are preferable to circular fiber posts in oval-shaped canals given the stress distribution at the postdentin interface.
Abstract
PURPOSE. The aim of the present study was to evaluate the effects of posts with different morphologies on stress distribution in an endodontically treated mandibular premolar by using finite element models (FEMs). MATERIALS AND METHODS. A mandibular premolar was modeled using the ANSYS software program. Two models were created to represent circular and oval fiber posts in this tooth model. An oblique force of 300 N was applied at an angle of 45° to the occlusal plane and oriented toward the buccal side. von Mises stress was measured in three regions each for oval and circular fiber posts. RESULTS. FEM analysis showed that the von Mises stress of the circular fiber post (426.81 MPa) was greater than that of the oval fiber post (346.34 MPa). The maximum distribution of von Mises stress was in the luting agent in both groups. Additionally, von Mises stresses accumulated in the coronal third of root dentin, close to the post space in both groups. CONCLUSION. Oval fiber posts are preferable to circular fiber posts in oval-shaped canals given the stress distribution at the postdentin interface.
참고문헌 (19)
- Hess D, "Retreatability of a bioceramic root canal sealing material", J Endod, 37, pp.1547~1549 (2011)
- Cecchin D, "Effect of chlorhexidine and ethanol on the durability of the adhesion of the fiber post relined with resin composite to the root canal", J Endod, 37, pp.678~683 (2011)
- Faria-e-Silva AL, "Effect of relining on fiber post retention to root canal", J Appl Oral Sci, 17, pp.600~604 (2009)
- Kremeier K, "Influence of endodontic post type (glass fiber, quartz fiber or gold) and luting material on push-out bond strength to dentin in vitro", Dent Mater, 24, pp.660~666 (2008)
- Giachetti L, "Push-out strength of translucent fibre posts cemented using a dual-curing technique or a light-curing selfadhering material", Int Endod J, 45, pp.249~256 (2012)
- Munoz C, "Oval fiber posts do not improve adaptation to oval-shaped canal walls", J Endod, 37, pp.1386~1389 (2011)
- Coniglio I, "Pushout bond strength of circular and oval-shaped fiber posts", Clin Oral Investig, 15, pp.667~672 (2011)
- Coniglio I, "Resin cement thickness in oval-shaped canals: oval vs. circular fiber posts in combination with different tips", drills for post space preparation, 2009, pp.22, 290~294
- Conglio I, "Post space debridement in oval-shaped canals: the use of a new ultrasonic tip with oval section", J Endod, 34, pp.752~755 (2008)
- Clark DJ, "Shaping and restoring ovoid canal systems", Endod ther, 5, pp.9~13 (2005)
- Boschian Pest L, "Stress distribution in a post-restored tooth using the three-dimensional finite element method", J Oral Rehabil, 33, pp.690~697 (2006)
- Hsu ML, "Effects of post materials and length on the stress distribution of endodontically treated maxillary central incisors: a 3D finite element analysis", J Oral Rehabil, 36, pp.821~830 (2009)
- Martínez-Insua A, "Comparison of the fracture resistances of pulpless teeth restored with a cast post and core or carbon-fiber post with a composite core", J Prosthet Dent, 80, pp.527~532 (1998)
- Maceri F, "Mechanical behaviour of endodontic restorations with multiple prefabricated posts: a finite-element approach", J Biomech, 40, pp.2386~2398 (2007)
- de Castro Albuquerque R, "Stress analysis of an upper central incisor restored with different posts", J Oral Rehabil, 30, pp.936~943 (2003)
- Pierrisnard L, "Coronoradicular reconstruction of pulpless teeth: a mechanical study using finite element analysis", J Prosthet Dent, 88, pp.442~448 (2002)
- Eskitaşcioğlu G, "Evaluation of two post core systems using two different methods", J Endod, 28, pp.629~633 (2002)
- Pegoretti A, "Finite element analysis of a glass fibre reinforced composite endodontic post", Biomaterials, 23 (2002)
- Aggarwal S, "Finite element analysis of stress concentration in three popular brands of fiber posts systems used for maxillary central incisor teeth", J Conserv Dent, 14, pp.293~296 (2011)