Corrosion resistance assessment of nickel-titanium endodontic files with and without heat treatment
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
Objectives: The aim of this study was to evaluate the corrosion resistance of heat-treated (Reciproc and WaveOne) and non-heat-treated (ProTaper and Mtwo) superelastic nickel-titanium endodontic files when immersed in a 5.25% sodium hypochlorite solution. Materials and Methods: Anodic polarization curves were obtained with potential sweeps that began at the open circuit potential or corrosion potential (Ecorr). The pitting potential (Epit) was identified on the anodic polarization curve as the potential at which a sudden increase in current was observed. The micromorphology of the 28 tested files was analyzed before and after the electrochemical assay using scanning electron microscope (SEM). The data were analyzed using 1-way analysis of variance with the post hoc Bonferroni test (for Ecorr) and the Student t-test for independent samples (for Epit). Results: The mean Ecorr values were 0.506 V for ProTaper, 0.348 V for Mtwo, 0.542 V for Reciproc, and 0.321 V for WaveOne files. Only WaveOne and Protaper files exhibited pitting corrosion, with Epit values of 0.879 V and 0.904 V, respectively. On the SEM images of the ProTaper and WaveOne files, cavities suggestive of pitting corrosion were detected. Conclusions: Signs of corrosion were observed in both heat-treated and non-heat-treated files. Of the evaluated files, WaveOne (a heat-treated file) and ProTaper (a non-heat-treated file) exhibited the lowest corrosion resistance.
Abstract
Objectives: The aim of this study was to evaluate the corrosion resistance of heat-treated (Reciproc and WaveOne) and non-heat-treated (ProTaper and Mtwo) superelastic nickel-titanium endodontic files when immersed in a 5.25% sodium hypochlorite solution. Materials and Methods: Anodic polarization curves were obtained with potential sweeps that began at the open circuit potential or corrosion potential (Ecorr). The pitting potential (Epit) was identified on the anodic polarization curve as the potential at which a sudden increase in current was observed. The micromorphology of the 28 tested files was analyzed before and after the electrochemical assay using scanning electron microscope (SEM). The data were analyzed using 1-way analysis of variance with the post hoc Bonferroni test (for Ecorr) and the Student t-test for independent samples (for Epit). Results: The mean Ecorr values were 0.506 V for ProTaper, 0.348 V for Mtwo, 0.542 V for Reciproc, and 0.321 V for WaveOne files. Only WaveOne and Protaper files exhibited pitting corrosion, with Epit values of 0.879 V and 0.904 V, respectively. On the SEM images of the ProTaper and WaveOne files, cavities suggestive of pitting corrosion were detected. Conclusions: Signs of corrosion were observed in both heat-treated and non-heat-treated files. Of the evaluated files, WaveOne (a heat-treated file) and ProTaper (a non-heat-treated file) exhibited the lowest corrosion resistance.
참고문헌 (26)
- Walia HM, "An initial investigation of the bending and torsional properties of Nitinol root canal files", J Endod, 14, pp.346~351 (1988)
- Gavini G, "Nickeltitanium instruments in endodontics: a concise review of the state of the art", Braz Oral Res, 32, pp.e67~ (2018)
- Hilt BR, "Torsional properties of stainless-steel and nickel-titanium files after multiple autoclave sterilizations", J Endod, 26, pp.76~80 (2000)
- Darabara M, "Susceptibility to localized corrosion of stainless steel and NiTi endodontic instruments in irrigating solutions", Int Endod J, 37, pp.705~710 (2004)
- Talha M, "A review on nickel-free nitrogen containing austenitic stainless steels for biomedical applications", Mater Sci Eng C, 33, pp.3563~3575 (2013)
- Wright PP, "Alkaline sodium hypochlorite irrigant and its chemical interactions", Materials (Basel), 10, pp.1147~1155 (2017)
- Pedullà E, "Cyclic fatigue resistance of heat-treated nickel-titanium instruments after immersion in sodium hypochlorite and", or sterilization, 2018, pp.44, 648~653
- Ametrano G, "Effects of sodium hypochlorite and ethylenediaminetetraacetic acid on rotary nickel-titanium instruments evaluated using atomic force microscopy", Int Endod J, 44, pp.203~209 (2011)
- Bonaccorso A, "Pitting corrosion resistance of nickel-titanium rotary instruments with different surface treatments in seventeen percent ethylenediaminetetraacetic acid and sodium chloride solutions", J Endod, 34, pp.208~211 (2008)
- Lee JB, "Effect of nitrogen alloying on the semiconducting properties of passive films and metastable pitting susceptibility of 316L and 316LN stainless steels", Mater Chem Phys, 122, pp.194~199 (2010)
- Prymak O, "Fatigue of orthodontic nickel-titanium (NiTi) wires in different fluids under constant mechanical stress", Mater Sci Eng A, 378, pp.110~114 (2004)
- Stokes OW, "Corrosion in stainless-steel and nickel-titanium files", J Endod, 25, pp.17~20 (1999)
- 염지완, "니켈티타늄 파일의 부식에 영향을 미치는 다양한 환경 조건 비교", Restorative Dentistry and Endodontics, 33(4), pp.377~388 (2008), 대한치과보존학회
- Berutti E, "Influence of sodium hypochlorite on fracture properties and corrosion of ProTaper Rotary instruments", Int Endod J, 39, pp.693~699 (2006)
- Pereira ES, "Physical and mechanical properties of a thermomechanically treated NiTi wire used in the manufacture of rotary endodontic instruments", Int Endod J, 45, pp.469~474 (2012)
- Ye J, "Metallurgical characterization of M-Wire nickel-titanium shape memory alloy used for endodontic rotary instruments during low-cycle fatigue", J Endod, 38, pp.105~107 (2012)
- Aoun CM, "Review and classification of heat treatment procedures and their impact on mechanical behavior of endodontic files", Int J Curr Res, 9, pp.51300~51306 (2017)
- Gutmann JL, "Alteration in the inherent metallic and surface properties of nickel-titanium root canal instruments to enhance performance, durability and safety: a focused review", Int Endod J, 45, pp.113~128 (2012)
- Prasad PS, "The effect of 5% sodium hypochlorite, 17% EDTA and triphala on two different rotary Ni-Ti instruments: an AFM and EDS analysis", J Conserv Dent, 17, pp.462~466 (2014)
- Ramires I, "Study of Ti-6Al-4V biomaterial using electrochemistry and XPS techniques", Quim Nova, 25, pp.10~14 (2002)
- Olmedo DG, "The issue of corrosion in dental implants:a review", Acta Odontol Latinoam, 22, pp.3~9 (2009)
- Silva EF, "Chemical and metallographic characterization of stainless steel in implants removed from patients", Acta Ortop Bras, 19, pp.280~285 (2011)
- Sonntag RE, "Introduction to thermodynamics: classical and statistical", pp.800~ (1991), John Wiley & Sons, Inc
- Lambert FL, "Configurational entropy revisited", J Chem Educ, 84, pp.1548~1550 (2007)
- Es-Souni M, "On the properties of two binary NiTi shape memory alloys. Effects of surface finish on the corrosion behaviour and in vitro biocompatibility", Biomaterials, 23, pp.2887~2894 (2002)
- Thompson SA, "An overview of nickel-titanium alloys used in dentistry", Int Endod J, 33, pp.297~310 (2000)