Incidence of apical crack formation and propagation during removal of root canal filling materials with different engine driven nickel-titanium instruments
1
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
Objectives: To determine the incidence of crack formation and propagation in apical root dentin after retreatment procedures performed using ProTaper Universal Retreatment (PTR), Mtwo-R, ProTaper Next (PTN), and Twisted File Adaptive (TFA) systems. Materials and Methods: The study consisted of 120 extracted mandibular premolars. One millimeter from the apex of each tooth was ground perpendicular to the long axis of the tooth, and the apical surface was polished. Twenty teeth served as the negative control group. One hundred teeth were prepared, obturated, and then divided into 5 retreatment groups. The retreatment procedures were performed using the following files: PTR, Mtwo-R, PTN, TFA, and hand files. After filling material removal, apical enlargement was done using apical size 0.50 mm ProTaper Universal (PTU), Mtwo, PTN, TFA, and hand files. Digital images of the apical root surfaces were recorded before preparation, after preparation, after obturation, after filling removal, and after apical enlargement using a stereomicroscope. The images were then inspected for the presence of new apical cracks and crack propagation. Data were analyzed with χ2 tests using SPSS 21.0 software. Results: New cracks and crack propagation occurred in all the experimental groups during the retreatment process. Nickel-titanium rotary file systems caused significantly more apical crack formation and propagation than the hand files. The PTU system caused significantly more apical cracks than the other groups after the apical enlargement stage. Conclusions: This study showed that retreatment procedures and apical enlargement after the use of retreatment files can cause crack formation and propagation in apical dentin.
Abstract
Objectives: To determine the incidence of crack formation and propagation in apical root dentin after retreatment procedures performed using ProTaper Universal Retreatment (PTR), Mtwo-R, ProTaper Next (PTN), and Twisted File Adaptive (TFA) systems. Materials and Methods: The study consisted of 120 extracted mandibular premolars. One millimeter from the apex of each tooth was ground perpendicular to the long axis of the tooth, and the apical surface was polished. Twenty teeth served as the negative control group. One hundred teeth were prepared, obturated, and then divided into 5 retreatment groups. The retreatment procedures were performed using the following files: PTR, Mtwo-R, PTN, TFA, and hand files. After filling material removal, apical enlargement was done using apical size 0.50 mm ProTaper Universal (PTU), Mtwo, PTN, TFA, and hand files. Digital images of the apical root surfaces were recorded before preparation, after preparation, after obturation, after filling removal, and after apical enlargement using a stereomicroscope. The images were then inspected for the presence of new apical cracks and crack propagation. Data were analyzed with χ2 tests using SPSS 21.0 software. Results: New cracks and crack propagation occurred in all the experimental groups during the retreatment process. Nickel-titanium rotary file systems caused significantly more apical crack formation and propagation than the hand files. The PTU system caused significantly more apical cracks than the other groups after the apical enlargement stage. Conclusions: This study showed that retreatment procedures and apical enlargement after the use of retreatment files can cause crack formation and propagation in apical dentin.
참고문헌 (33)
- Peters OA, "Current challenges and concepts in the preparation of root canal systems: a review", J Endod, 30, pp.559~567 (2004)
- Wilcox LR, "The relationship of root canal enlargement to finger-spreader induced vertical root fracture", J Endod, 23, pp.533~534 (1997)
- Onnink PA, "An in vitro comparison of incomplete root fractures associated with three obturation techniques", J Endod, 20, pp.32~37 (1994)
- Shemesh H, "Damage to root dentin during retreatment procedures", J Endod, 37, pp.63~66 (2011)
- Wu MK, "Comparison of mandibular premolars and canines with respect to their resistance to vertical root fracture", J Dent, 32, pp.265~268 (2004)
- Kishen A, "Mechanisms and risk factors for fracture predilection in endodontically treated teeth", Endod Topics, 13, pp.57~83 (2006)
- Sim TP, "Effect of sodium hypochlorite on mechanical properties of dentine and tooth surface strain", Int Endod J, 34, pp.120~132 (2001)
- Bier CA, "The ability of different nickel-titanium rotary instruments to induce dentinal damage during canal preparation", J Endod, 35, pp.236~238 (2009)
- Friedman S, "Efficacy of removing glass ionomer cement, zinc oxide eugenol, and epoxy resin sealers from retreated root canals", Oral Surg Oral Med Oral Pathol, 73, pp.609~612 (1992)
- Alapati SB, "Metallurgical characterization of a new nickel-titanium wire for rotary endodontic instruments", J Endod, 35, pp.1589~1593 (2009)
- Ruddle CJ, "The shaping movement: fifth-generation technology", Dent Today, 32, pp.96~99 (2013)
- Gambarini G, "Cyclic fatigue analysis of twisted file rotary NiTi instruments used in reciprocating motion", Int Endod J, 45, pp.802~806 (2012)
- Pedullà E, "Influence of cyclic torsional preloading on cyclic fatigue resistance of nickel - titanium instruments", Int Endod J, 48, pp.1043~1050 (2015)
- Üstün Y, "The effect of reciprocation versus rotational movement on the incidence of root defects during retreatment procedures", Int Endod J, 48, pp.952~958 (2015)
- Capar ID, "Effects of ProTaper Universal, ProTaper Next, and HyFlex instruments on crack formation in dentin", J Endod, 40, pp.1482~1484 (2014)
- Adorno CG, "The effect of endodontic procedures on apical crack initiation and propagation ex vivo", Int Endod J, 46, pp.763~768 (2013)
- Liu R, "Incidence of apical root cracks and apical dentinal detachments after canal preparation with hand and rotary files at different instrumentation lengths", J Endod, 39, pp.129~132 (2013)
- Zuolo AS, "Efficacy of reciprocating and rotary techniques for removing filling material during root canal retreatment", Int Endod J, 46, pp.947~953 (2013)
- Topçuoğlu HS, "Incidence of apical crack initiation and propagation during the removal of root canal filling material with ProTaper and Mtwo rotary nickel-titanium retreatment instruments and hand files", J Endod, 40, pp.1009~1012 (2014)
- Kesim B, "Efficacy of manual and mechanical instrumentation techniques for removal of overextended root canal filling material", Niger J Clin Pract, 20, pp.761~766 (2017)
- Gergi R, "Effectiveness of two nickel-titanium rotary instruments and a hand file for removing gutta-percha in severely curved root canals during retreatment: an ex vivo study", Int Endod J, 40, pp.532~537 (2007)
- Tamse A, "Vertical root fractures in endodontically treated teeth: diagnostic signs and clinical management", Endod Topics, 13, pp.84~94 (2006)
- Yoldas O, "Dentinal microcrack formation during root canal preparations by different NiTi rotary instruments and the self-adjusting file", J Endod, 38, pp.232~235 (2012)
- Yared GM, "Cyclic fatigue of ProFile rotary instruments after clinical use", Int Endod J, 33, pp.204~207 (2000)
- Gambarini G, "Cyclic fatigue of ProFile rotary instruments after prolonged clinical use", Int Endod J, 34, pp.386~389 (2001)
- Alapati SB, "Scanning electron microscope observations of new and used nickel-titanium rotary files", J Endod, 29, pp.667~669 (2003)
- Topçuoğlu HS, "The effects of Mtwo, R-Endo, and D-RaCe retreatment instruments on the incidence of dentinal defects during the removal of root canal filling material", J Endod, 40, pp.266~270 (2014)
- Kuttler S, "The impact of post space preparation with Gates-Glidden drills on residual dentin thickness in distal roots of mandibular molars", J Am Dent Assoc, 135, pp.903~909 (2004)
- Topçuoğlu HS, "Effect of glide path and apical preparation size on the incidence of apical crack during the canal preparation using Reciproc, WaveOne, and ProTaper Next systems in curved root canals: a stereomicroscope study", Scanning, 38, pp.585~590 (2016)
- Nevares G, "Efficacy of ProTaper NEXT compared with Reciproc in removing obturation material from severely curved root canals: a micro–computed tomography study", J Endod, 42, pp.803~808 (2016)
- Özyürek T, "Cyclic fatigue resistance of reciproc, WaveOne, and WaveOne gold nickel-titanium instruments", J Endod, 42, pp.1536~1539 (2016)
- Zhou X, "Comparison of dentinal and apical crack formation caused by four different nickel-titanium rotary and reciprocating systems in large and small canals", Dent Mater J, 34, pp.903~909 (2015)
- Liu R, "The incidence of root microcracks caused by 3 different single-file systems versus the ProTaper system", J Endod, 39, pp.1054~1056 (2013)
