Physical-mechanical, chemical and biological properties of graphene-reinforced glass ionomer cements
2
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
bjectives This study aimed to evaluate the physical-mechanical, chemical, and biological properties of graphene-reinforced glass ionomer cements (GICs). Materials and Methods Different proportions of graphene powder were incorporated into 2 high-viscosity self-curing GIC, Ketac Molar (GKetac) and Fuji IX (GFuji), in 4 different concentrations: 0.5%, 1%, 2%, and 5%. The control groups included the GICs without graphene. Experiments were performed to analyze linear (Ra) and volumetric roughness (Sa), antimicrobial activity, radiopacity, fluoride release, microhardness, solubility, and water sorption. Data were analyzed using Kruskal-Wallis, Mann-Whitney, Wilcoxon, analysis of variance, and Tukey’s test (p ≤ 0.05). Results The GKetac 0% and GFuji0% groups presented higher Ra (4.05 and 2.72) and Sa (4.76 and 5.16), respectively. No inhibition zone was observed, and the incorporation of graphene reduced radiopacity. Moreover, there was no influence on the solubility and water sorption after 21 days. A greater fluoride release was observed in the period of 7 days for most of the groups. After 21 days, GKetac 5%, 2%, and 1% presented higher releasing than 0% and 0.5% (p ≤ 0.05). Conclusions The graphene incorporation improved the microhardness of GICs in lower concentrations. Graphene incorporation to GICs modified some physical-mechanical, and chemical, but not affected biological properties.
Abstract
bjectives This study aimed to evaluate the physical-mechanical, chemical, and biological properties of graphene-reinforced glass ionomer cements (GICs). Materials and Methods Different proportions of graphene powder were incorporated into 2 high-viscosity self-curing GIC, Ketac Molar (GKetac) and Fuji IX (GFuji), in 4 different concentrations: 0.5%, 1%, 2%, and 5%. The control groups included the GICs without graphene. Experiments were performed to analyze linear (Ra) and volumetric roughness (Sa), antimicrobial activity, radiopacity, fluoride release, microhardness, solubility, and water sorption. Data were analyzed using Kruskal-Wallis, Mann-Whitney, Wilcoxon, analysis of variance, and Tukey’s test (p ≤ 0.05). Results The GKetac 0% and GFuji0% groups presented higher Ra (4.05 and 2.72) and Sa (4.76 and 5.16), respectively. No inhibition zone was observed, and the incorporation of graphene reduced radiopacity. Moreover, there was no influence on the solubility and water sorption after 21 days. A greater fluoride release was observed in the period of 7 days for most of the groups. After 21 days, GKetac 5%, 2%, and 1% presented higher releasing than 0% and 0.5% (p ≤ 0.05). Conclusions The graphene incorporation improved the microhardness of GICs in lower concentrations. Graphene incorporation to GICs modified some physical-mechanical, and chemical, but not affected biological properties.
참고문헌 (60)
- McLean JW, "The clinical development of the glass-ionomer cements. I. Formulations and properties", Aust Dent J, 22, pp.31~36 (1977)
- Chen J, "Antibacterial and mechanical properties of reduced graphene-silver nanoparticle nanocomposite modified glass ionomer cements", J Dent, 96, pp.103332~ (2020)
- Wiegand A, "Review on fluoride-releasing restorative materials--fluoride release and uptake characteristics, antibacterial activity and influence on caries formation", Dent Mater, 23, pp.343~362 (2007)
- Lan WH, "Cytotoxicity of conventional and modified glass ionomer cements", Oper Dent, 28, pp.251~359 (2003)
- Hume WR, "In vitro studies on the potential for pulpal cytotoxicity of glass-ionomer cements", J Dent Res, 67, pp.915~918 (1988)
- Sun L, "Improvement of the mechanical, tribological and antibacterial properties of glass ionomer cements by fluorinated graphene", Dent Mater, 34, pp.e115~e127 (2018)
- Sidhu SK, "A review of glass-ionomer cements for clinical dentistry", J Funct Biomater, 7, pp.16~ (2016)
- Paiva L, "Antibacterial properties and compressive strength of new one-step preparation silver nanoparticles in glass ionomer cements(NanoAg-GIC)", J Dent, 69, pp.102~109 (2018)
- Al-Angari SS, "Physicomechanical properties of a zinc-reinforced glass ionomer restorative material", J Oral Sci, 56, pp.11~16 (2014)
- Silva RM, "Dental glass ionomer cement reinforced by cellulose microfibers and cellulose nanocrystals", Mater Sci Eng C, 58, pp.389~395 (2016)
- Tiwari S, "Antibacterial activity and fluoride release of glass-ionomer cement, compomer and zirconia reinforced glass-ionomer cement", J Clin Diagn Res, 10, pp.ZC90~ZC93 (2016)
- Wang Y, "Hertzian load-bearing capacity of a ceramic-reinforced glass ionomer cement stored wet and dry", Dent Mater, 25, pp.952~955 (2009)
- Simmons JJ, "The miracle mixture. Glass ionomer and alloy powder", Tex Dent J, 100, pp.6~12 (1983)
- Paiva LF, "Mineral content of ionomer cements and preventive effect of these cements against white spot lesions around restorations", Braz Oral Res, 28, pp.1~9 (2014)
- Ching HS, "Modification of glass ionomer cements on their physical-mechanical and antimicrobial properties", J Esthet Restor Dent, 30, pp.557~571 (2018)
- Mitra SB, "Adhesion to dentin and physical properties of a light-cured glass-ionomer liner", base, 1991, pp.70, 72~74
- Lucas ME, "Toughness, bonding and fluoride-release properties of hydroxyapatite-added glass ionomer cement", Biomaterials, 24, pp.3787~3794 (2003)
- Garoushi S, "Hollow glass fibers in reinforcing glass ionomer cements", Dent Mater, 33, pp.e86~e93 (2017)
- Gu YW, "Development of zirconia-glass ionomer cement composites", J Non-Cryst Solids, 351, pp.508~514 (2005)
- Najeeb S, "Modifications in glass ionomer cements : nano-sized fillers and bioactive nanoceramics", Int J Mol Sci, 17, pp.1134~ (2016)
- Novoselov KS, "A roadmap for graphene", Nature, 490, pp.192~200 (2012)
- Syama S, "Safety and biocompatibility of graphene : a new generation nanomaterial for biomedical application", Int J Biol Macromol, 86, pp.546~555 (2016)
- Lee C, "Measurement of the elastic properties and intrinsic strength of monolayer graphene", Science, 321, pp.385~388 (2008)
- Tu Y, "Destructive extraction of phospholipids from Escherichia coli membranes by graphene nanosheets", Nat Nanotechnol, 8, pp.594~601 (2013)
- Al-Jumaili A, "Review on the antimicrobial properties of carbon nanostructures", Materials(Basel), 10, pp.1066~ (2017)
- Sarosi C, "The nanofiller effect on properties of experimental graphene dental nanocomposites", J Adhes Sci Technol, 30, pp.1779~1794 (2016)
- Yadav R, "Biomaterials for dental composite applications : a comprehensive review of physical, chemical, mechanical, thermal, tribological, and biological properties", Polym Advan Technol, 33, pp.1762~1781 (2022)
- Tiu J, "A step toward bio-inspired dental composites", Biomater Investig Dent, 10, pp.2150625~ (2023)
- Ghodrati P, "Evaluation of the effect of nano-graphene oxide on shear bond strength of conventional and resin-modified glass ionomer cement", Clin Exp Dent Res, 9, pp.851~858 (2023)
- Bahammam S, "Evaluating the mechanical properties of restorative glass ionomers cements", Int Dent J, 72, pp.859~865 (2022)
- Hussein TA, "The assessment of surface roughness and microleakage of eroded tooth-colored dental restorative materials", J Conserv Dent, 17, pp.531~535 (2014)
- de Camargo FLL, "Effects of a bleaching agent on properties of commercial glass-ionomer cements", Restor Dent Endod, 43, pp.e32~ (2018)
- Tsuge T, "Radiopacity of conventional, resin-modified glass ionomer, and resin-based luting materials", J Oral Sci, 51, pp.223~230 (2009)
- Carvalho-Junior JR, "Solubility and dimensional change after setting of root canal sealers : a proposal for smaller dimensions of test samples", J Endod, 33, pp.1110~1116 (2007)
- Shintome LK, "Microhardness of glass ionomer cements indicated for the ART technique according to surface protection treatment and storage time", Braz Oral Res, 23, pp.439~445 (2009)
- Buldur M, "Microhardness of glass carbomer and high-viscous glass ionomer cement in different thickness and thermo-light curing durations after thermocycling aging", BMC Oral Health, 19, pp.273~ (2019)
- Eshaghi Gorji F, "Oral mucosa and Streptococcus mutans count in the saliva. Does graphene oxide nanoparticle mouthwash have a good effect?", Caspian J Intern Med, 12, pp.342~349 (2021)
- He J, "Killing dental pathogens using antibacterial graphene oxide", ACS Appl Mater Interfaces, 7, pp.5605~5611 (2015)
- Mao M, "Graphene oxide-copper nanocomposites suppress cariogenic Streptococcus mutans biofilm formation", Int J Nanomedicine, 16, pp.7727~7739 (2021)
- Zhao M, "The antibacterial effect of graphene oxide on Streptococcus mutans", J Nanosci Nanotechnol, 20, pp.2095~2103 (2020)
- Hegab HM, "Single-step assembly of multifunctional poly(tannic acid)-graphene oxide coating to reduce biofouling of forward osmosis membranes", ACS Appl Mater Interfaces, 8, pp.17519~17528 (2016)
- Zhou R, "Cytotoxicity of graphene : recent advances and future perspective", Wiley Interdiscip Rev Nanomed Nanobiotechnol, 6, pp.452~474 (2014)
- Simón-Soro A, "Solving the etiology of dental caries", Trends Microbiol, 23, pp.76~82 (2015)
- Hitij T, "Radiopacity of dental restorative materials", Clin Oral Investig, 17, pp.1167~1177 (2013)
- ADA Division of Science, "Resin-based composites", J Am Dent Assoc, 134, pp.510~512 (2003)
- Willems G, "Radiopacity of composites compared with human enamel and dentine", J Dent, 19, pp.362~365 (1991)
- Espelid I, "Radiopacity of restorations and detection of secondary caries", Dent Mater, 7, pp.114~117 (1991)
- Sidhu SK, "Radiopacity of resin-modified glass-ionomer restorative cements", Quintessence Int, 27, pp.639~643 (1996)
- Prévost AP, "Radiopacity of glass ionomer dental materials", Oral Surg Oral Med Oral Pathol, 70, pp.231~235 (1990)
- Yaylacı A, "Evaluation of the radiopacity of restorative materials with different structures and thicknesses using a digital radiography system", Imaging Sci Dent, 51, pp.261~269 (2021)
- Aydın N, "Investigation of water sorption and aluminum releases from high viscosity and resin modified glass ionomer", J Clin Exp Dent, 12, pp.e844~e851 (2020)
- Müller JA, "Evaluation of ISO 4049 : water sorption and water solubility of resin cements", Eur J Oral Sci, 125, pp.141~150 (2017)
- Brito CR, "Glass ionomer cement hardness after different materials for surface protection", J Biomed Mater Res A, 93A, pp.243~246 (2010)
- Sun J, "Multi-layer graphene reinforced nano-laminated WC-Co composites", Mater Sci Eng A, 723, pp.1~7 (2018)
- Siddique R, "Effect of carbon nanotubes on properties of cement mortars", Constr Build Mater, 50, pp.116~129 (2014)
- Asmussen E, "Long-term fluoride release from a glass ionomer cement, a compomer, and from experimental resin composites", Acta Odontol Scand, 60, pp.93~97 (2002)
- Nassar HM, "Fluoride release from two high-viscosity glass ionomers after exposure to fluoride slurry and varnish", Materials(Basel), 12, pp.3760~ (2019)
- Seppä L, "The effect of fluoride application on fluoride release and the antibacterial action of glass ionomers", J Dent Res, 72, pp.1310~1314 (1993)
- Cury JA, "Are fluoride releasing dental materials clinically effective on caries control?", Dent Mater, 32, pp.323~333 (2016)
- Hicks J, "Fluoride-releasing restorative materials and secondary caries", J Calif Dent Assoc, 31, pp.229~243 (2003)