Effects of a bleaching agent on properties of commercial glass-ionomer cements
2
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
Objectives: This study evaluated the effects of a bleaching agent on the composition, mechanical properties, and surface topography of 6 conventional glass-ionomer cements (GICs) and one resin-modified GIC. Materials and Methods: For 3 days, the specimens were subjected to three 20-minute applications of a 37% H2O2-based bleaching agent and evaluated for water uptake (WTK), weight loss (WL), compressive strength (CS), and Knoop hardness number (KHN). Changes in surface topography and chemical element distribution were also analyzed by energy-dispersive X-ray spectroscopy and scanning electron microscopy. For statistical evaluation, the Kruskal-Wallis and Wilcoxon paired tests (ɑ = 0.05) were used to evaluate WTK and WL. CS specimens were subjected to 2-way analysis of variance (ANOVA) and the Tukey post hoc test (α = 0.05), and KH was evaluated by one-way ANOVA, the Holm-Sidak post hoc test (ɑ = 0.05), and the t-test for independent samples (ɑ = 0.05). Results: The bleaching agent increased the WTK of Maxxion R, but did not affect the WL of any GICs. It had various effects on the CS, KHN, surface topography, and the chemical element distribution of the GICs. Conclusions: The bleaching agent with 37% H2O2 affected the mechanical and surface properties of GICs. The extent of the changes seemed to be dependent on exposure time and cement composition.
Abstract
Objectives: This study evaluated the effects of a bleaching agent on the composition, mechanical properties, and surface topography of 6 conventional glass-ionomer cements (GICs) and one resin-modified GIC. Materials and Methods: For 3 days, the specimens were subjected to three 20-minute applications of a 37% H2O2-based bleaching agent and evaluated for water uptake (WTK), weight loss (WL), compressive strength (CS), and Knoop hardness number (KHN). Changes in surface topography and chemical element distribution were also analyzed by energy-dispersive X-ray spectroscopy and scanning electron microscopy. For statistical evaluation, the Kruskal-Wallis and Wilcoxon paired tests (ɑ = 0.05) were used to evaluate WTK and WL. CS specimens were subjected to 2-way analysis of variance (ANOVA) and the Tukey post hoc test (α = 0.05), and KH was evaluated by one-way ANOVA, the Holm-Sidak post hoc test (ɑ = 0.05), and the t-test for independent samples (ɑ = 0.05). Results: The bleaching agent increased the WTK of Maxxion R, but did not affect the WL of any GICs. It had various effects on the CS, KHN, surface topography, and the chemical element distribution of the GICs. Conclusions: The bleaching agent with 37% H2O2 affected the mechanical and surface properties of GICs. The extent of the changes seemed to be dependent on exposure time and cement composition.
참고문헌 (31)
- Wilson AD, "The glass-ionomer cement, a new translucent dental filling material", J Chem Technol Biotechnol, 21, pp.313~ (1971)
- Baroudi K, "Fluoride release of glass ionomer restorations after bleaching with two different bleaching materials", Eur J Dent, 7, pp.196~200 (2013)[DOI]
- Markovic DL, "Fluoride content and recharge ability of five glassionomer dental materials", BMC Oral Health, 8, pp.21~ (2008)[DOI]
- Wiegand A, "Review on fluoride-releasing restorative materials--fluoride release and uptake characteristics, antibacterial activity and influence on caries formation", Dent Mater, 23, pp.343~362 (2007)[DOI]
- Arita K, "Hydroxyapatite particle characteristics influence the enhancement of the mechanical and chemical properties of conventional restorative glass ionomer cement", Dent Mater J, 30, pp.672~683 (2011)[DOI]
- Benetti AR, "How mobile are protons in the structure of dental glass ionomer cements?", Sci Rep, 5, pp.8972~ (2015)[DOI]
- Bresciani E, "Compressive and diametral tensile strength of glass ionomer cements", J Appl Oral Sci, 12, pp.344~348 (2004)[DOI]
- Carvalho FG, "Effect of chemical and mechanical degradation on surface roughness of three glass ionomers and a nanofilled resin composite", Oper Dent, 37, pp.509~517 (2012)[DOI]
- Khoroushi M, "A review of glass-ionomers: From conventional glass-ionomer to bioactive glass-ionomer", Dent Res J (Isfahan), 10, pp.411~420 (2013)
- Baroudi K, "Effect of vital bleaching on disintegration tendency of glass ionomer restorations", J Clin Diagn Res, 8, pp.214~217 (2014)
- de Paula AB, "Influence of chemical degradation on the surface properties of nano restorative materials", Oper Dent, 39, pp.E109~E117 (2014)[DOI]
- El-Murr J, "Effects of external bleaching on restorative materials: a review", J Can Dent Assoc, 77, pp.b59~ (2011)
- Markovic L, "Effects of bleaching agents on surface roughness of filling materials", Dent Mater J, 33, pp.59~63 (2014)[DOI]
- Turker SB, "Effect of three bleaching agents on the surface properties of three different esthetic restorative materials", J Prosthet Dent, 89, pp.466~473 (2003)[DOI]
- Samiei M, "Scanning electron microscopy and energy-dispersive X-ray microanalysis of set CEM cement after application of different bleaching agents", Iran Endod J, 12, pp.191~195 (2017)
- Yu H, "Influence of carbamide peroxide on the flexural strength of tooth-colored restorative materials: an in vitro study at different environmental temperatures", Oper Dent, 35, pp.300~307 (2010)[DOI]
- Yu H, "Effects of temperature and in-office bleaching agents on surface and subsurface properties of aesthetic restorative materials", J Dent, 41, pp.1290~1296 (2013)[DOI]
- Zavanelli AC, "Surface roughness analysis of four restorative materials exposed to 10% and 15% carbamide peroxide", Int J Prosthodont, 24, pp.155~157 (2011)
- Crim GA, "Prerestorative bleaching: effect on microleakage of Class V cavities", Quintessence Int, 23, pp.823~825 (1992)
- Mair L, "The measurement of degradation and wear of three glass ionomers following peroxide bleaching", J Dent, 32(Supplementary 1), pp.41~45 (2004)
- Briso AL, "Transenamel and transdentinal penetration of hydrogen peroxide applied to cracked or microabrasioned enamel", Oper Dent, 39, pp.166~173 (2014)[DOI]
- Goncalves LS, "Improved polymerization efficiency of methacrylate-based cements containing an iodonium salt", Dent Mater, 29, pp.1251~1255 (2013)[DOI]
- Fonseca RB, "Influence of powder", liquid ratio on the radiodensity and diametral tensile strength of glass ionomer cements, 2010, pp.18, 577~584
- Lim HN, "Influence of HEMA content on the mechanical and bonding properties of experimental HEMA-added glass ionomer cements", J Appl Oral Sci, 17, pp.340~349 (2009)[DOI]
- Topaloglu-Ak A, "Microhardness and surface roughness of glass ionomer cements after APF and TiF4 applications", J Clin Pediatr Dent, 37, pp.45~51 (2012)[DOI]
- Sidhu SK, "A review of glass-ionomer cements for clinical dentistry", J Funct Biomater, 7, pp.16~ (2016)[DOI]
- Della Bona A, "Influence of shade and irradiation time on the hardness of composite resins", Braz Dent J, 18, pp.231~234 (2007)[DOI]
- Cehreli ZC, "Effect of home-use bleaching gels on fluoride releasing restorative materials", Oper Dent, 28, pp.605~609 (2003)
- Cacciafesta V, "In-vitro fluoride release rates from 9 orthodontic bonding adhesives", Am J Orthod Dentofacial Orthop, 132, pp.656~662 (2007)[DOI]
- Xu X, "Compressive strength, fluoride release and recharge of fluoride-releasing materials", Biomaterials, 24, pp.2451~2461 (2003)[DOI]
- Lee KH, "Mineral loss from bovine enamel by a 30% hydrogen peroxide solution", J Oral Rehabil, 33, pp.229~233 (2006)[DOI]